• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.233-239
• /
• 2010

Space loss of dental arch can appear when the proper position of teeth within the dental arch changes by a certain cause, because the balance of force makes changes about tooth position as well as alignment. The causes of space loss include proximal caries, early extraction, congenital missing of a tooth and hypodontia, etc. Among those causes of space loss, congenital missing of a tooth is more rarely observed in the primary dentition than in the permanent dentition. Congenital missing in the primary dentition is associated with that in the permanent dentition. Furthermore, it can cause space problem, such as mesial tilting or drift of adjacent teeth, space loss for permanent successors and dental arch constriction, etc. Primary lateral incisors is the most commonly involved, in the maxilla rather than in the mandible, but primary canine is rarely reported. In this patient, who visited the department of pediatric dentistry at Yonsei university dental hospital, it was observed that the maxillary right primary canine was congenitally missing and an odontoma was found insteadly. However, neither the space loss for the congenitally missing primary canine nor midline deviation is remarkable during the 2-year-10-month observation period. In addition, any clinical or radiographical symptom did not occur in spite of odontoma. Therefore, surgical enucleation of odontoma is planned according to the eruption of permanent lateral incisor or canine, unless eruption failure of permanent lateral incisor or canine nor cystic change around the odontoma is occurred. Through further evaluation, space maintainer or orthodontic treatment may be necessary.

• The Journal of Korean society of community based occupational therapy
• /
• v.4 no.1
• /
• pp.75-84
• /
• 2014

Objective : This study intends to suggest an effective clinical intervention method for stroke patients by applying a trunk stabilization training program to a single stroke patient and investigating and analyzing the effects of the program on postural control and activities of daily living. Methods : The subject of this study was a 75 year-old female stroke patient hospitalized in C Hospital located in Gyeongju, Gyeongsangbuk-do. As for the research design, A-B-A reversal design was used with a single subject design; and the research period was a total of five weeks from April 21, 2014 to May 23, 2014. As for the research process, a total of 15 sessions were carried out including three sessions of baseline(A), nine sessions of an intervention period(B), and three sessions of maintenance(A'); and the trunk stabilization program was applied during the intervention period. To evaluate the participant's postural control and activities of living life, the Postural Assessment Scale for Stroke(PASS) and the modified Barthel Index(MBI) were used. Visual analysis was used in which collected data were plotted on a graph, using Microsoft Office Excel 2013. Results : In the postural control test, the mean scores improved from 11.7 in the baseline phase to 14.8 in the intervention phase and 15.3 in the maintenance phase. In the evaluation of activities of daily living, the score improved from 66(medium dependence) during the baseline period to 80(low dependence) after intervention and at the maintenance phase. Conclusion : It was found that the trunk stabilization training program showed effects on the stroke patient's postural control or alignment, and furthermore a beneficial improvement in the patient's performing the activities of daily living, as well.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.21-36
• /
• 2005

Although the main geology of Korea consists of granite and gneiss, it Is not uncommon to encounter anisotropy Phenomena in crosshole radar tomography even when the basement is crystalline rock. To solve the anisotropy Problem, we have developed and continuously upgraded an anisotropic inversion algorithm assuming a heterogeneous elliptic anisotropy to reconstruct three kinds of tomograms: tomograms of maximum and minimum velocities, and of the direction of the symmetry axis. In this paper, we discuss the developed algorithm and introduce some case histories on the application of anisotropic radar tomography in Korea. The first two case histories were conducted for the construction of infrastructure, and their main objective was to locate cavities in limestone. The last two were performed In a granite and gneiss area. The anisotropy in the granite area was caused by fine fissures aligned in the same direction, while that in the gneiss and limestone area by the alignment of the constituent minerals. Through these case histories we showed that the anisotropic characteristic itself gives us additional important information for understanding the internal status of basement rock. In particular, the anisotropy ratio defined by the normalized difference between maximum and minimum velocities as well as the direction of maximum velocity are helpful to interpret the borehole radar tomogram.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.159-163
• /
• 2005

The propriety between suppliers and demanders in geometric design is very important. Although the final purpose of constructing roads is to concern about the driver s comfort, unfortunately, it has not been considered so far. We've considered the regularity and quickness in considering driver's comfort but there should be considered the safety for the accident as well. If drivers are appeared to be more speeding than designer's intention, there will be needed some supplements to increase the safety rate for the roads. Even if both an upward and downward section are supposed to exist at the same time for solid geometry of the roads like this, it is true that the recent design for the 3-D solid geometry section has been done as flat 2-D and the minimum plane curve radius and the maximum cant have been decided just by calculating without considering operating speed between an upward and downward section at the same point. In this investigation, thus, I'd like to calculate the safety of the cant by considering the speed features of the solid geometry for the first lane of four lane rural roads. To begin with, we investigated the driving speed of the car, which is not been influenced by a preceding car to analyze the influence of the geometrical structure by using Nc-97. Secondly, we statistically analyzed the driving features of the solid geometry after comparing the 6 sections, that is, measuring the driving speed feature at 12 points and combining the influence of the vertical geometry and plane geometry to the driving speed of the plane curve which was researched before. Finally, we estimated the value of cant which considers the driving speed not by using it which has applied uniformly without considering it properly, though there were some differences between a designed speed and driving speed through the result of the basic statistical analysis but by introducing the new safety rate rule, a notion of ${\alpha}$. As a result of the research, we could see the driving features of the car and suggest the safety rate which considers these. For considering the maximum cant, if we apply the safety rate, the result of this experiment, which considers 3-D solid geometry, there'll be the improvement of the driver's safety for designing roads. In addition, after collecting and analyzing the data for the road sections which have various geometrical structures by expanding this experiment it is considered that there should be developed the models which considers 3-D solid geometry.

• Journal of Chest Surgery
• /
• v.39 no.5 s.262
• /
• pp.347-353
• /
• 2006

Background: Despite recent advances in surgical technique and perioperative care of total anomalous pulmonary venous return (TAPVR), post-repair pulmonary vein stenosis (PVS) remains as a serious complication. We thought that the most important factors of TAPVR repair to prevent PVS were good exposure, proper alignment, and sufficient stoma size. We analyzed our experience retrospectively. Material and Method: Between Jan. 1995 and Feb. 2005, we studied 74 patients diagnosed with TAPVR suitable for biventricular repair. Supra-cardiac type (n=41, 55.4%) was the most common. Mean CPB time, ACC time, and TCA (40.5%, 30/74) time were $92.1{\pm}25.9\;min,\;39.1{\pm}10.6\;min$, and $30.2{\pm}10.7\;min$, respectively. Mean follow-up duration was $41.4{\pm}29.1$ months and follow-up was possible in all patients. Result: The median age and body weight at operation were 28.5 days ($0{\sim}478$ days) and 3.4 kg $(1.4{\sim}9\;kg)$. Early mortality was 4.1% (3/74). Causes of death were pulmonary hypertensive crisis, sepsis, and sudden death. There was PR-PVS in 2 patients (early: 1, late: 1). Both patients were cardiac type TAPVR drained to coronary sinus. Re-operations were done but only one patient survived. Cumulative survival rate in 5 year and percent freedom from PVS were $94.5{\pm}2.7%\;and\;97.2{\pm}2.0%$, respectively. Conclusion: There was no PVS in patients who underwent extra-cardiac anatomosis between LA and CPVC. Therefore it could be said that our principle might be effective in preventing PR-PVS in patients suitable two-ventricle.

• The Journal of Korean Society for Radiation Therapy
• /
• v.21 no.2
• /
• pp.89-95
• /
• 2009

Purpose: The purpose is to evaluate efficiency of the CT simulator QA phantom manufactured for daily QA. Materials and Methods: We made holes ($1{\times}100{\times}1\;mm$) to verify accuracy between image and real measurement in polystyrene phantom and made 1 mm holes to verify table movement accuracy at superior and inferior 100 mm to the center of the phantom and inserted radiopacity material. To evaluate laser alignment, we made cross mark on the right and left side at phantom and to evaluate CT number accuracy we made 3 cylindrical holes and inserted equivalence material of bone, water, air in them. After CT scanning the phantom, We evaluated accuracy between image and real measurement, accuracy of table movement, laser, and CT number using exposed image. Results: It was measured that the accuracy between image and real measurement was ${\pm}0.3\;mm$, table movement accuracy was ${\pm}0.3\;mm$, laser accuracy was ${\pm}0.5\;mm$ from 7th January to 7th March in 2008 as within the reference point ${\pm}1\;mm$. In the CT number accuracy of bone was ${\pm}10\;HU$, air was ${\pm}5\;HU$, water was ${\pm}5\;HU$ as within the reference point is ${\pm}10\;HU$. Conclusion: We was able to perform CT simulator QA and laser equipment QA more conveniently and fast using manufactured phantom at the same time. We will be able to make more accurate treatment plan that added to QA procedures using images at previous daily QA.

• The Korean Journal of Malacology
• /
• v.24 no.1
• /
• pp.73-80
• /
• 2008

Numerous morphological studies on N. samarangae have been well conducted over the last ten years. In this context, we have attemtped to do molecular phylogenetic analysis by using metallothionein (MT) gene from N. samarangae. To this end, we cloned the full length cDNA of MT from cDNA library of N. samarangae. The complete cDNA sequences were obtained from the expressed sequence tag (EST) sequencing project of N. samarangae, The coding region of 195 bp gives an amino acid sequence of 65 residues including methionine. There are 5' (61 bp) and 3' (48 bp) untranslated region at both ends of the Ns-MT cDNA sequence. The combined results from BLAST analyses, multiple sequence alignment and molecular phylogenetic study of Ns-MT cDNA indicate that N. samarangae has similarity to land snails such as Helix pomatia, Helix aspersa and Arianta arbustorum.

• Journal of Korean Physical Therapy Science
• /
• v.7 no.2
• /
• pp.615-628
• /
• 2000

This report is to study on the progress on which foot arch and planta has been changed according to body type based on 4 tilting of scapular & ilium. This study has been carried out to help contribute to some basic information like these. One was to find out how to assess and analysize the deformity of feet and ankle joint which may have the most impact on ideal alignment of anatomical posture. The other was to figure out how to diagnose and treat the deformity to get to the restoration. The results of this study is as followings; 1. The findings which had been made from 22 persons(50%) having left scapular and ilium forward tilt are as follows. 1) On the longitudinal length of the planta left parts of 18 persons(82%) are longer than the right one. On the transversel length of the planta right parts of 17 persons(77%) are longer than the left one. 2) On the size of medial longitudinal arch the left parts of 20 persons(91%) are more wider than the right one. 3) On the sign of supinated foot, the left parts of 18 persons(82%) are more common than the right one. 4) On the thickness of big toe, the left parts of 14 persons(64%) are thicker than the right one. 2. The findings which had been made from 15 persons(34%) having right scapular and ilium forward tilt are as follows. 1) On the longitudinal length of the planta right parts of 11 persons(73%) are longer than the left one. On the transversel length of the planta left parts of 13 persons(87%) are longer than the right one. 2) On the size of medial longitudinal arch the right parts of 13 persons(87%) are more wider than the left one. 3) On the sign of supinated foot, the right parts of 12 persons(80%) are more common than the left one. 4) On the thickness of big toe, the right parts of 7 persons(47%) are thicker than the left one. 3. The findings which had been made from 3 persons(7%) having left scapular and right ilium forward tilt are as follows. 1) On the longitudinal length of the planta right parts of 2 persons(67%) are longer than the left one. On the transversel length of the planta left parts of 2 persons(67%) are longer than the right one. 2) On the size of medial longitudinal arch the right parts of 3 persons(100%) are more wider than the left one. 3) On the sign of supinated foot, the right parts of 2 persons(67%) are more common than the left one. 4) On the thickness of big toe, the left parts of 2 persons(67%) are thicker than the right one. 4. The findings which had been made from 4 persons(9%) having right scapular and left ilium forward tilt are as follows. 1) On the longitudinal length of the planta left parts of 3 persons(75%) are longer than the right one. On the transversel length of the planta right parts of 2 persons(50%) are longer than the left one. 2) On the size of medial longitudinal arch the left parts of 3 persons(75%) are more wider than the right one. 3) On the sign of supinated foot, the left parts of 3 persons(75%) are more common than the right one. 4) On the thickness of big toe, the left parts of 3 persons(75%) are thicker than the right one.

• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.2
• /
• pp.99-108
• /
• 2016

Purpose: The present study was aimed to compare the tear volume and distribution by corneal eccentricity when fitted with spherical and aspherical RGP lenses. Methods: Spherical and aspherical RGP lenses were fitted in best alignment on a total of 77 subjects (136 eyes) in their twenties and thirties without any ocular disease or ocular surgery experience. The tear volume was analyzed by estimating the concentration of tear stained with fluorescein in the center of RGP lens as well as at the mid-peripheral and peripheral areas, and the difference of tear distributions was analyzed according to corneal eccentricity. Results: Tear distribution from the center to the peripheral area was not significantly different when spherical RGP lenses were fitted on the corneal eccentricities of e < 0.38 and $0.68{\leq}e$, indicating the relatively even tear distribution compared with other corneal eccentricity. In the case of aspherical RGP lenses, the difference of tear distribution between the central and peripheral areas was smaller than spherical RGP lenses. The significant difference of tear distribution according to RGP lens design was observed in the corneal eccentricity of 0.48 < e < 0.68. In other words, more even tear distribution was shown when aspherical RGP lenses were fitted on the cornea with eccentricity of $0.48{\leq}e<0.68$ and spherical RGP lenses were fitted on the cornea with eccentricity $0.68{\leq}e$. Furthermore, tear volume in the mid-peripheral area increased with higher corneal eccentricity. Conclusions: The results suggest that the appropriate selection of RGP lens design according to corneal eccentricity is necessary since tear volume and distribution by the regions of spherical and aspherical lenses are affected by corneal eccentricity.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.593-604
• /
• 1995

Mandibular incisor crowding is one of the most common features of malocclusion and is interesting characteristic in view of relapse and stability after orthodontic treatment. There are many potential factors in the etiology of lower anterior crowding. The tooth size variation is one of them, but biologic significance for the faciolingual width of the teeth has been overlooked. Peck and Peck reported that persons with ideal mandibular incisor alignment were shown to have incisor with smaller mesiodistal and larger faciolingual dimensions than persons with incisor crowding. On the basis of these findings they suggested MD/FL index as a clinical guideline for the assessment for lower incisor crowding. The present study was undertaken to examine the relationship between mandibular incisor crowding and mandibular incisor dimension, and determine their correlation with arch length discrepancy. 154 dental casts of people from 11 to 17 years of age were made, and were divided into normal group with irregularity index less than of 1, and crowding group with irregularity index greater than 1.The casts were measured and analyzed statistically. The results were as follows. 1. The mean mesiodistal width for mandibular incisor was larger in crowding group, and has significant difference in central inciosr measurement. There are no significant differences in the faciolingul width and MD/FL index. 2. Irregularity index has significant correlation coefficients with mesiodistal width and MD/FL index for mandibular incisor in crowding group, but no correlation with faciolingual width. It also has correlation with maxillary and mandibular arch length discrepancy, total tooth material, mandibular intercanine width, and mandibular inter first premolar width. 3. Upper and lower arch length discrepancy have significant correlation with mesiodistal width of mandibular incisor and overbite, but have no correlation with faciolingual width. Lower arch lenth discrepancy has significant correlation with MD/FL index for mandibular incisor and upper arch length discrepancy has correlation with MD/FL index for mandibular lateral incisor. 4. Significant differences were observed between normal and crowding group for the mandibular arch length discrepancy and overbite.