• Advances in nano research
• /
• v.9 no.2
• /
• pp.105-112
• /
• 2020

Silicene is a two-dimensional (2D) derivative of silicon (Si) arranged in honeycomb lattice. It is predicted to be compatible with the present fabrication technology. However, its gapless properties (neglecting the spin-orbiting effect) hinders its application as digital switching devices. Thus, a suitable band gap engineering technique is required. In the present work, the band structure and density of states of uniformly doped silicene are obtained using the nearest neighbour tight-binding (NNTB) model. The results show that uniform substitutional doping using aluminium (Al) has successfully induced band gap in silicene. The band structures of the presented model are in good agreement with published results in terms of the valence band and conduction band. The band gap values extracted from the presented models are 0.39 eV and 0.78 eV for uniformly doped silicene with Al at the doping concentration of 12.5% and 25% respectively. The results show that the engineered band gap values are within the range for electronic switching applications. The conclusions of this study envisage that the uniformly doped silicene with Al can be further explored and applied in the future nanoelectronic devices.

• Environmental Engineering Research
• /
• v.22 no.1
• /
• pp.61-74
• /
• 2017

This study investigated the effect of various cations ($Ca^{2+}$, $Mg^{2+}$, $Al^{3+}$, $Mn^{2+}$, $Zn^{2+}$) on the autoaggregation (AAg) and surface hydrophobicity (SHb) of three different bacteria (Brevibacillus panacihumi strain (ZB1), Lysinibacillus fusiformis strain (ZB2) and Enterococcus faecalis strain (ZL)) using a 2-level factorial design. The AAg ratio was measured from the changes in the absorbance of the media. Results show that ZB2 had maximum AAg for the three bacteria investigated. A microscopic clustering of cells was observed when $Ca^{2+}$ was added to ZB2. The AAg was in the range of 62%, 58% and 34% for ZB2, ZB1 and ZL, respectively and correlated to the SHb. The aggregation and SHb of the microbial cells increased with increasing ionic strength due to the repulsive steric or overlap forces between the polymer covered surfaces. $Ca^{2+}$ demonstrated a more significant effect on aggregation and SHb of microbial cells due to an attractive binding force.

• Journal of KIISE:Software and Applications
• /
• v.32 no.8
• /
• pp.808-818
• /
• 2005

We devise a differential fixpoint computation method and develop a new worklist algorithm based on it. Compared with other differential methods, our method can deal with non-distributive systems and adopt any worklist scheduling policy satisfying restrictions imposed by differential evaluation. As a practical application, we present an interpretation framework and implement constant and alias analysis and memory lifetime analysis based on it. Our experiment shows that our method can save computation and worklist scheduling is also important in differential fixpoint evaluations.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.829-840
• /
• 2013

The modified sinusoidal pulse-width modulation (SPWM) is one of the PWM techniques used in three-phase AC-DC buck converters. The modified SPWM works without the current sensor (the converter is current sensorless), improves production of sinusoidal AC current, enables obtainment of near-unity power factor, and controls output voltage through modulation gain (ranging from 0 to 1). The main problem of the modified SPWM is the huge starting current and voltage (during transient) that results from a large step change from the reference voltage. When the load changes, the output voltage significantly drops (through switching losses and non-ideal converter elements). The single-input single-output (SISO) approach with minor-loop voltage feedback controller presented here overcomes this problem. This approach is created on a theoretical linear model and verified by discrete-model simulation on MATLAB/Simulink. The capability and effectiveness of the SISO approach in compensating start-up current/voltage and in achieving zero steady-state error were tested for transient cases with step-changed load and step-changed reference voltage for linear and non-linear loads. Tests were done to analyze the transient performance against various controller gains. An experiment prototype was also developed for verification.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.108-111
• /
• 2003

Altimeter data from the Topex/Poseidon (T/P) were analyzed to study the sea surface circulation and its variability in the North East Asian Seas. Long term averaged T/P sea level time series data where compared with in situ sea level measurements from a float-operated type tide gauge around of south Korea and Japan. Tf data are a large contaminated by 60-day tidal aliasing effect, very near the alias periods of M2 and S2. When this 60-day effect is removed, the data agree well with the tide gauge data with 4.6 cm averaged RMS difference. The T/P derived sea level variability reveals clearly the well-known, strong current-topography such as Kuroshio. The T/P mean sea level of North Pacific (NP) was higher than Yellow Sea (YS) and East Sea (ES). The T/P sea level variability, with strong eddy and meandering, was the largest in eastern part of Japan and this variability was mainly due to the influence of bottom topography in Kuroshio Extension area.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1136-1151
• /
• 2018

This paper proposes a new hybrid scheme to decrease the high peak to average power ratio (PAPR) of optical orthogonal frequency division multiplexing (OFDM) signals in visible light communication (VLC) systems. The PAPR causes nonlinear signal distortions and high power requirements for the VLC transmitter (light emitting diode, LED). The proposed method is applicable for both direct current-biased optical OFDM (DCO-OFDM) and asymmetrically clipped optical OFDM (ACO-OFDM). In the proposed scheme, the PTS method is firstly modified to fit both optical OFDM approaches transmission and then combined with signal clipping method for further PAPR reduction and bit error rate (BER) improvement of the VLC system. The performance of hybrid scheme has been evaluated and compared with the original OFDM based VLC system, conventional PTS and clipping methods. The results show that the hybrid scheme outperforms other methods in terms of both the PAPR reduction and BER performance.

• Industry Promotion Research
• /
• v.3 no.1
• /
• pp.73-77
• /
• 2018

This paper written by Choi Bu based on "Piaohailu". This book consists of 3 volumes and it is his travelogue; Choi Bu has departed from Jeju Island to Naju, Jeolla province in the end of 1487, but it drifted on his way, so arrived to Zhejiang Province, China(Mid-Ming Dynasty) in early 1488. In this place, he interrogated with a reason for Japan pirates, but he released soon. And his waterway journey from Hangzhou to Beijing, he had received the award in Beijing which is the grace of the Emperor;and his land route journey from Beijing through Liaodong to Uiju, Pingan Province. Afterwards, this book had been translated in Japanese, English etc; and it had been awarded an alias of 'Chaoxian's Marco Polo'.From the description of the characters in the Mid-Ming Dynasty in the work of Pyohae-rok, the essay makes a study on the knowledge of ancient Korean scholars to China, and looks at the different social and political aspects and characteristics of the Ming Dynasty from the eyes of Korean scholars. It summarizes that when we face history squarely, it is important to refer to and draw on the foreign works recorded by ancient Korean scholars.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.300-303
• /
• 2001

The first 7 years of altimeter data from the TOPEX/POSEIDON (T/P) were analyzed to study the surface circulation and its variability in the East Asian Marginal Seas. Long term averaged T/P sea level time series data where compared with in situ sea level measurements from a float-operated type tide gauge around of south Korea and Japan. T/P data are a large contaminated by 60-day tidal aliasing effect, very near the alias periods of M2 and S2. When this 60-day effect is removed, the data agree well with the tide gauge data with 4.6 cm averaged RMS difference. The T/P derived sea level variability reveals clearly the well-known, strong current-topography such as Kuroshio. The T/P mean sea level of North Pacific (NP) was higher than Yellow Sea (YS) and East Sea (ES). The T/P sea level valibility, with strong eddy and meandaring, was the largest in eastern part of Japan and this variability was mainly due to the influence of bottom topography in Kuroshio Extention area.

• Fashion & Textile Research Journal
• /
• v.12 no.3
• /
• pp.272-278
• /
• 2010

The purpose of this study was to research about Dobby weave design using Computer-Aided Weaving System. For performing this design study, first, it was researched the characteristics of the classified woven fabrics, weaving processing, structure of Dobby loom, and Computer-Aided Dobby Weaving system theoretically. To develop Dobby woven design, Patternland Weave Simulator(U.S.A) for computer weave system was used. Among the developed Dobby woven designs by computer weaving system, mainly three of them were selected and woven into Dobby loom. To see the visual image of the fabric end-use, some of the scanned Dobby fabrics were simulated to the three-dimensional virtual images by Alias CAD system. The result of this study can be summarized as follows. Before the step of weaving Dobby fabrics on the woven design works, Computer-Aided Weaving system can be done very easily to apply the design step of Dobby woven fabrics, specially in case of the complicated woven structure. Also the usage of the simulation CAD system in visual image of the final products, ultimately can be saved cost and developed the higher value-added goods in more response to consumer demands.

• Journal of Korean Medical classics
• /
• v.21 no.1
• /
• pp.143-151
• /
• 2008

Objective : Classification of herbal formulas through the analysis of compositional herb's is a suitable method in the aspects of the effective applications of herbal formulas. However, these classification methods have some problems in dealing with lots of herbal formulas because the estimations of herbal formula's effects are dependent upon one's memory. In this study, we aimed to establish the effective methodology to elicit the classified herbal formula's chart by introducing the DB systems without interfering with non-standard terms. Results : We have known that this plan is realized by follow methods. We entered the herbs informations of the composition of herbal formulas into database, made an alias tables of corresponding herbs, and achieved standardization of herb's informations. Using these databases, we made the classified herbal formula's chart according to the presence and the treatment informations of herbs.