• 융합정보논문지
• /
• 제9권9호
• /
• pp.141-146
• /
• 2019

여러 종류의 항공기가 운용되고 있는 훈련 비행장에서 항공기의 소음을 실제 측정하여 분석하는 것은 어렵다. 이러한 실제적인 한계를 극복하고 적절한 소음 대책을 수립하기 위해서 FAA에서 사용하는 INM 7.0(Integrated Noise Model Version 7.0)을 사용하여 소음 지도를 작성하였다. 터보프롭 항공기 (C90GT)가 이륙 경로, 착륙 경로 및 장주경로를 비행하면서 발생하는 소음을 측정하였고 법적으로 소음의 피해가 되는 70 WECPNL 이상인 지역을 조사하였다. 터보프롭 항공기가 운용되고 있는 모든 경로에서 70 WECPNL을 초과하는 지역은 발견되지 않았다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1342-1347
• /
• 1997

In this paper, we performed simulations of aircraft automatic landing using GPS, DGPS and CDGPS. Our purpose is examining the possibility of aircraft landing using GPS through the simulation results. The aircraft landing is composed of two stages, glide-slope and flare. Therefore, LQG controllers are designed separately. In simulations, measurement noise depends not only on UERE and UERRE(which have different values in GPS, DGPS, and CDGPS) but also on DOPs. DOPs are determined only by the geometry of GPS satellite constellation. For DOP calculation, we also made program for GPS satellites orbit simulatiion. Accordin to the simulation results, ICAO CAT III can be achieved of CDGPS is used.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2335-2339
• /
• 2003

To prevent the critical situation due to the fault in the aircraft sensor system, the fault tolerant system with triple or quadruple redundancy can be made. However, if the faults are occurred in two or more than sensors simultaneously, the conventional fault detection process, such as cross-channel monitoring, may give the wrong fault alarm. For this case, we can detect the fault by estimating the state vector based on the system dynamics model, which is nonlinear for aircraft. In this paper, we propose the unscented Kalman filter to estimate the nonlinear state vector. This filter utilizes the so-called unscented transformation of sigma points featured the statistical characteristics of the random variable. For verification, we perform the simulations for F-16 aircraft with accelerometers, gyros, GPS and air data system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.229-229
• /
• 2006

WECPNL(Weighted Equivalent Continuous Perceived Noise Level) which designated currently in Domestic 'The Stanrd Method of Measuring Noise and Vibration' is composed of different factor with WECPNL that published in ICAO. Domestic WECPNL is concerned in application of $L_{MAX}$ measurement. On the other hand, ICAO's WECPNL is based on EPNL that includes factors of the pure tone correction and the duration time. NNI and NEF also are each based on PNL and EPNL. Because a military aircraft noise, especially, has the pure tone of high frequency and the irregular duration, it seems to be undesirable to estimate aircraft noise for using Domestic WECPNL. Therefore, this study was performed to detect a flaw of Korean WECPNL, through comparison of the trend of each other aircraft noise index by using equivalent rawdata.

• 한국군사과학기술학회지
• /
• 제12권6호
• /
• pp.711-718
• /
• 2009

During the preliminary design phase of a supersonic aircraft, it is necessary to evaluate many potential engine/airframe combinations to determine the best solution to given set of mission requirements. And it is very important to establish a methodology to predict precisely afterbody drag so that accurate engine installed performance can be estimated. It was carried out in this paper to establish a methodology to predict afterbody drag of F-15K supersonic aircraft based on IMS(Integral Mean Slope) methodology, acquire afterbody drag data and compare its calculated data with the test data acquired from the wind tunnel test data based on 4.7% model scale. The comparison results showed good agreement between the calculated data and test data and it was found that the methodology described here to predict and test afterbody drag is acceptable.

• 한국항공운항학회지
• /
• 제21권2호
• /
• pp.33-39
• /
• 2013

Multilateration(MLAT) may complement secondary surveillance radar and also act as a real-time backup for the ADS-B system. This System is using time difference of arrival (TDOA) and based on triangulation principle. Each TDOA measurement defines a hyperbola describing possible aircraft locations. The accuracy in MLAT system depends on the positional relationship of the receiver and aircraft. There are various algorithms to localize aircraft based on TOA estimation. In this paper, we use least square method and extended Kalman filter and compare their results. Study results show that the extend Kalman filter provides a better performance than the least square method.

• 항공우주시스템공학회지
• /
• 제14권spc호
• /
• pp.39-48
• /
• 2020

본 논문에서는 풍동 실험을 통해 측정한 소음 결과를 활용하여 실제 비행하는 기체에서 발생되는 소음수준을 예측하고 비행시험을 통해 검증하는 과정을 다루었다. 항공기의 환경소음 평가를 위해서는 일반적으로 국제민간항공기구(이하 ICAO)에서 규정한 절차에 따라 소음시험 및 평가를 수행하게 된다. 본 논문에서는 고정익 및 회전익(멀티콥터)의 특징을 모두 가지고 있는 복합형 기체에 적용이 가능한 환경 소음평가 방안과 실험을 통해 검증한 결과를 제시하였다. 고정익과 회전익 소형 무인기를 활용하여 풍동실험에서 측정한 소음시험 결과를 실제 비행 시험결과로 시뮬레이션 하는 과정을 제시하였다. 또한, ICAO에서 제시하는 비행 운용조건 및 소음 측정 방법을 고려하여 풍동실험을 통한 결과와 실 기체 비행시험을 모두 수행하여 항공기 소음인증을 위한 실효감각소음레벨(EPNL)을 예측 및 고찰하였다.

• Composites Research
• /
• 제27권4호
• /
• pp.152-157
• /
• 2014

Non-destructive testing methods of composite materials are very important for improving material reliability and safety. AE measurement is based on the detection of microscopic surface movements from stress waves in a material during the fracture process. The examination of AE is a useful tool for the sensitive detection and location of active damage in polymer and composite materials. FBG (Fiber Bragg Grating) sensors have attracted much interest owing to the important advantages of optical fiber sensing. Compared to conventional electronic sensors, fiber-optical sensors are known for their high resolution and high accuracy. Furthermore, they offer important advantages such as immunity to electromagnetic interference, and electrically passive operation. In this paper, the crack detection capability of AE (Acoustic Emission) measurement was compared with that of an FBG sensor under tensile testing and buckling test of composite materials. The AE signals of the PVDF sensor were measured and an AE signal analyzer, which had a low pass filter and a resonance filter, was designed and fabricated. Also, the wavelength variation of the FBG sensor was measured and its strain was calculated. Calculated strains were compared with those determined by finite element analysis.

• 한국항공운항학회지
• /
• 제20권2호
• /
• pp.18-25
• /
• 2012

The availability of the GPS signal has been expanded greatly in the field of society overall through the development and construction of the GNSS(Global Navigation Satellite System). Furthermore, in the military, aviation and field of space, the GPS signal is applied widely through the combination of INS consisting of gyroscope and accelerometer, IMU, AHRS with the addition of magnetic sensor. Particularly, the performance of these equipments or sensors is very important with GPS and PAR(Precision Approach Radar) in the flight control of the aircraft. This paper deals with MATLAB simulation and ROLSO(Reduced Order Luenberger State Observer) design to reduce the load of system and realize the stable lateral direction approach control in an appropriate time for reduction of the horizontal error which is importantly considered while an aircraft lands instead of the FOLSO(Full Order Luenberger State Observer) using all measurement values. Consequently, ROLSO is expected to be used for the aircraft's attitude control in the aircraft landing causing the burden to the pilots.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1052-1060
• /
• 2023

The airborne radiation monitoring has been used in geophysics for more than forty years and now it also has its important role in emergency monitoring. The aircraft background and the cosmic gamma-rays contribute to the measured gamma spectrum on the aircraft board. This adverse effect should be eliminated before the data processing. The paper describes two semiparametric methods to estimate the full spectrum aircraft background and cosmic gamma-ray contribution from spectra measured at altitudes where terrestrial contribution is negligible. The methods only assume to know possible peak positions in spectra and their full width at half maximum, that can be easily obtained e.g. from terrestrial measurement. The methods were applied to real experimental data acquired on Mi-17 and Bell 412 helicopter boards. The IRIS airborne gamma-ray spectrometer, with 4×4 L NaI(Tl) crystals, produced by Pico Envirotec Inc., Canada, was used on helicopters' boards. To obtain valid estimate of the aircraft background and the cosmic contribution, the measurements over sea and large water areas were carried out. However, the satisfactory results over inland were also achieved comparing with those acquired over large water areas.