Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Composite Fracture Detection Capabilities of FBG Sensor and AE Sensor

  • Kim, Cheol-Hwan (Research Center for Aircraft Parts Technology, School of Mechanical and Aerospace Engineering, Gyeongsang National Univesity) ;
  • Choi, Jin-Ho (Research Center for Aircraft Parts Technology, School of Mechanical and Aerospace Engineering, Gyeongsang National Univesity) ;
  • Kweon, Jin-Hwe (Research Center for Aircraft Parts Technology, School of Mechanical and Aerospace Engineering, Gyeongsang National Univesity)
  • Received : 2014.03.11
  • Accepted : 2014.08.07
  • Published : 2014.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Non-destructive testing methods of composite materials are very important for improving material reliability and safety. AE measurement is based on the detection of microscopic surface movements from stress waves in a material during the fracture process. The examination of AE is a useful tool for the sensitive detection and location of active damage in polymer and composite materials. FBG (Fiber Bragg Grating) sensors have attracted much interest owing to the important advantages of optical fiber sensing. Compared to conventional electronic sensors, fiber-optical sensors are known for their high resolution and high accuracy. Furthermore, they offer important advantages such as immunity to electromagnetic interference, and electrically passive operation. In this paper, the crack detection capability of AE (Acoustic Emission) measurement was compared with that of an FBG sensor under tensile testing and buckling test of composite materials. The AE signals of the PVDF sensor were measured and an AE signal analyzer, which had a low pass filter and a resonance filter, was designed and fabricated. Also, the wavelength variation of the FBG sensor was measured and its strain was calculated. Calculated strains were compared with those determined by finite element analysis.

Keywords

References

  1. Reinhart, J.J. (Eds), Composite, ASM International, Vol. 1, 1987, pp. 479-495.
  2. Dunyak, T.J., Stinchcomb, W.W., and Reifsnider, K.L., Examination of Selected NDE Techniques for Ceramic Composite Components, Damage Detection in Composite Materials, ASTM, STP 1128, 1992, pp. 3-24.
  3. Bathias, C., and Cagnasso, A., Application of X-ray Tomography to the Nondestructive Testing of High-performance Polymer Composites, Damage Detection in Composite Materials, ASTM, STP 1128, 1992, pp. 35-54.
  4. Steiner, K.V., Defect Classifications in Composites Using Ultrasonic Nondestructive Evaluation Techniques, Damage detection in composite materials, ASTM, STP 1128, 1992, pp. 72-84.
  5. Chen, J.Y., Hoa, V., Jen, C.K., and Wang, H.W., "Fiber-optic and Ultrasonic Measurements for In-situ Cure Monitoring of Graphite/epoxy Composites", Journal of Composite Materials, Vol. 33, No. 20, 1999, pp. 1860-1881. https://doi.org/10.1177/002199839903302001
  6. Yu, Y.-H., Choi, J.-H., Kweon, J.-H., and Kim, D.-H., "A Study on the Failure Detection of Composite Materials Using an Acoustic Emission", Journal of Composite Structures, Vol. 75, 2006, pp. 163-169. https://doi.org/10.1016/j.compstruct.2006.04.070
  7. Asher, R.C., Ultrasonic Sensors for Chemical and Process Plant, Institute of Physics Pub, Bristol and Philadelphia, 1997.