• KIEAE Journal
• /
• 제10권3호
• /
• pp.89-96
• /
• 2010

In comparison with ordinary or heavy-weight concrete, light-weight air void concrete has the good aspects in optimizing super tall structure systems for the process of design considering wind load and seismic load by lightening total dead load of buildings and reducing natural resources used. Light-weight air void concrete has excellent properties of heat and sound insulating due to its high amount porosity of air voids. So, it has been used as partition walls and the floor of Ondol which is the traditional Korean floor heating system. Under the condition of which the supply of light-weight aggregates are limited, the development of light-weight concrete using air voids is highly required in the aspects of reduced manufacturing prices and mass production. In this study, we investigated the physical properties and thermal behaviors of specimens that applied different mixing ratios of foaming agent to evaluate the possibility of use in the structural elements. We proposed the estimating equation for compressive strength of each mix having different ratio of foaming agent. We also confirmed that the density of cement matrix is decreased as the mixing amount of foaming agent increase up to 0.6% of foaming agent mixing ratio which was observed by SEM. Based on porosity and compressive strength of control mortar without foaming agent, we built the estimating equations of compressive strength for mortars with foaming agent. The upper limit of use in foaming agent is about 0.6% of the binder amount. Each air void is independent, and size of voids range from 50 to $100{\mu}m$.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2010년 춘계학술대회 논문집
• /
• pp.235-240
• /
• 2010

• 한국도로학회논문집
• /
• 제9권4호
• /
• pp.135-147
• /
• 2007

아스팔트 포장에서의 골재분리(segregation)는 혼합물 내의 굵은골재와 잔골재가 고르게 분포하지 않은 결과이며, 균열, 레블링(raveling), 박리(stripping)와 같은 조기 파손을 야기한다. 그러나 소성변형에 대한 골재분리의 효과는 아직까지 제대로 규명되지 못하고 있다. 본 연구에서 수행된 실험 및 분석 결과, 아스팔트 포장의 소성변형은 혼합물의 골재분리보다는 혼합물 내의 골재 구조에 더 큰 영향을 받음을 알 수 있었다. 또한 굵은골재의 체적이 증가함에 따라 혼합물의 소성변형 저항성은 증가하였다. 그러나 이러한 현상은 낮은 공극율을 갖는 혼합물에서는 잘 일치하였지만, 높은 공극율을 갖는 혼합물에서는 골재의 체적 증가 보다는 공극율 자체가 소성변형에 더 큰 영향을 줌을 알 수 있었다. 즉, 공극율 10%를 기준으로, 이를 초과하는 혼합물은 굵은 골재의 체적이 큼에도 불구하고 소성변형 저항성은 크게 감소함을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.184-187
• /
• 2004

There are many factors that generate the early deterioration of the concrete structure. As the one of the representative factors, we can think an invasion of the water, air and so on. The water and air invade in inside void along the capillarity and they become the cause that the durability like corrosion of layer department due to freezing and thawing, inside steel frame corrosion, and so on blacks. Therefore with covering permeability covering waterproofing material of fluid condition in outer wall, intercepting the deterioration factor due to the infiltration of water from outside and for salt damage of concrete layer department, freezing damage and neutralization, it needs to improve durability of structure. This study separately examined physical and chemical specific of quality liguid siliceous of waterproofing material. Therefore as this applys the construction site, it improves the durability of concrete structure. Further this presents the application plan from the construction market against the new material.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.63-67
• /
• 2003

There are many factors that generate the early deterioration of the concrete structure. As the one of the representative factors, we can think an invasion of the water, air and so on. The water and air invade in inside void along the capillarity and they become the cause that the durability like corrosion of layer department due to freezing and thawing, inside steel frame corrosion, and so on blacks. Therefore with covering permeability covering waterproofing material of fluid condition in outer wall, intercepting the deterioration factor due to the infiltration of water from outside and for salt damage of concrete layer department, freezing damage and neutralization, it needs, to improve durability of structure. This study separately examined physical and chemical specific of quality liguid siliceous of waterproofing material. Therefore as this applys the construction site, it improves the durability of concrete structure. Further this presents the application plan from the construction market against the new material.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.63-67
• /
• 2003

There are many factors that generate the early deterioration of the concrete structure. As the one of the representative factors, we can think an invasion of the water, air and so on. The water and air invade in inside void along the capillarity and they become the cause that the durability like corrosion of layer department due to freezing and thawing, inside steel frame corrosion, and so on blacks. Therefore with covering permeability covering waterproofing material of fluid condition in outer wall, intercepting the deterioration factor due to the infiltration of water from outside and for salt damage of concrete layer department, freezing damage and neutralization, it needs to improve durability of structure. This study separately examined physical and chemical specific of quality liquid siliceous of waterproofing material. Therefore as this applys the construction site, it improves the durability of concrete structure. Further this presents the application plan from the construction market against the new material.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.313-318
• /
• 1997

Air voids existed in hardened concrete have an important influence on concrete deterioration such as carbonation, freezing and thawing, and corrosion of embedded steel in concrete. Therefore it is very significant to investigate the pore structure of system (size, number and continuity of air voids) to solve the reason caused concrete deterioration. The purpose of this study is to develop th standard method of measuring air voids which affect properties in hardened concrete using image analyzing system. This paper presents the settlement of rapid and exact experimental method which extracts fine bubbles, calculates the number of air voids, and determines air-voids distributions using image analyzing system with computer.

• Composites Research
• /
• 제33권3호
• /
• pp.147-152
• /
• 2020

본 연구에서는 스파/스킨 복합재 일체형 구조물 시편 제작을 통해 구조물 형상에 의한 국부적인 내부압력 구배 및 표면접착필름 적용 조건에 따른 복합재 내부 기공의 거동에 대하여 실험적으로 평가하였다. 표면접착 필름과 탄소섬유 프리프레그 소재의 점도특성 및 열분석 비교를 통해 경화특성 및 속도 차이를 확인하였다. 그리고 스파/스킨 일체형 구조물 시편을 표면접착필름 적용 조건에 따라 2가지 유형으로 성형 제작하여 표면상태검사, 비파괴 검사 및 파괴 검사를 통하여 검증하였다. 표면접착필름이 전체 표면에 적용된 시편#1의 경우 내부구조에 의한 압력 구배가 발생하고 이로 인해 낮은 압력이 적용되는 부위에서 형성된 기공들이 먼저 경화된 표면접착필름에 막혀 배출되지 못함을 확인할 수 있었으며, 표면접착필름이 적용되지 않아 탄소섬유 프리프레그가 전면 노출된 시편#2에서는 내부 기공이 완전히 배출됨을 볼 수 있었으며 미리 경화된 표면접착필름이 내부 기공 이동 및 배출에 있어서 차단막(Barrier film)으로 작용할 수 있음을 확인하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권2호
• /
• pp.239-246
• /
• 2004

콘크리트의 구조물의 내구성을 향상시키기 위해서는 W/C의 감소, 피복두께의 증가, 혼화재의 사용 등을 예로 들 수 있다. 특히, 혼화재를 사용한 경우 콘크리트의 수밀성이 향상되고 구조체의 내구성이 향상되는 것으로 보고되고 있으나 염소이온 확산에 대해서는 보다 체계적인 연구를 수행할 필요가 있다. 또한 혼화재를 사용한 콘크리트의 경우, 혼화재 종류에 따라 포졸란반응 및 잠재수경성 등에 의해 콘크리트 내부조직의 변화가 발생하므로 콘크리트의 염소이온 확산에 대한 보다 정확한 평가를 위해서는 콘크리트 내부의 조직을 평가할 수 있는 요소들을 고려해야 한다. 이에 본 연구에서는 혼화재를 사용한 콘크리트의 내구수명을 평가하기 위한 연구의 일환으로 콘크리트의 압축강도, 공극률, 투기성을 물리적 특성으로 설정하고 이들과 염소이온 확산계수와의 관계를 분석하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.65-71
• /
• 2001

Absorbers such as porous materials and panels have limited absorption characteristics to some frequency bands. There is a need for absorbers with high absorption coefficients in a wide frequency ranges to make good response of room acoustics. This is almost impossible for a single absorption material. Composite absorption structure with cover, porous material. and air gap is known to have those wide frequency characteristics. In this basis. various composite absorption structures are measured and investigated as wide range absorption structures. Measurements are performed according to an international standard, ISO 354. Various surface types such as wooden slits, wood/steel perforated panels are selected as surface covers, and also various porous materials such as polyurethanes, polyesters, and glasswools are used inside the covers. Result shows that the area of void parts of surface materials is critical to high frequency absorptions, and thickness of air gaps are critical factor of the peak absorptions of low frequency bands.