• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2195-2201
• /
• 2009

This paper considers the influence of suction-line heat exchangers on the efficiency of a refrigeration cycle using hydrocarbon refrigerants such as R290, R600a and R1270. These suction-line heat exchangers can, in some cases, yield improved system performance while in other cases they degrade system performance. A steady state mathematical model is used to analyze the performance characteristics of refrigeration cycle with suction-line heat exchanger. The influence of operating conditions, such as the mass flowrate of hydrocarbon refrigerants, inner diameter tube and length of suction-line heat exchanger, to the performance of the cycle is also analyzed in the paper. Results showed that the mass flowrate of hydrocarbon refrigerants, inner diameter tube and length of suction-line heat exchanger, and effectiveness have an effect on the cooling capacity, compressor work and RCI(Relative Capacity Index) of this system. With a thorough grasp of these effect, it is necessary to design the compression refrigeration cycle of hydrocarbon refrigerants using suction-line heat exchanger.

• Journal of Climate Change Research
• /
• v.5 no.4
• /
• pp.285-289
• /
• 2014

The extension of growing season (GS) across the Northern Hemisphere have been linked to increasing temperature, related with global warming. Therefore, in this study, The start, end, and length of GS in Suwon, Korea from 1971 to 2013 based on observed daily mean air temperature are examined using three indices. The GS starts on average after $98.598.5{\pm}1.42$ Julian days and ends after $318.7{\pm}1.08$ Julian days. The average length of GS is $220.2{\pm}2.09$ Julian days. The length of GS in Suwon from 1971 to 2013 has been extended by 6.8 days/decade with an earlier onset of the GS (-4.1 days/decade) and later end of the GS (2.7 days/decade). This change may be due to an advanced start of the GS in spring rather than later end of the GS. In further study, it is necessary to select an index carefully to find the most suitable one for Korea.

• Journal of Climate Change Research
• /
• v.4 no.3
• /
• pp.245-254
• /
• 2013

Korea government promote renewable energy as the core of their energy matrix to break the dependence and reduce greenhouse effects. This study analyzes the economic assessment of Solid Refuse Fuel project in urban area, considering the marginal external costs of air pollution in this area. Assessment index defined as costs (i.e., construction cost, operation cost) and benefit (margin, external cost) data which is located in Sudokwon landfill site. The result indicates that cost-benefit analysis of SRF is calculated as 1.0. In addition, SRF project is very sensitive about electric power selling price, operating cost and labor cost according to inflation rates. This study shows that the sustainability of SRF project is required the government financial support like investment funds as well as policy support. Variability analysis of SRF economic assessment due to renewable energy can be used for making policies in various fields such as waste and public energy field.

• The Korean Journal of Mycology
• /
• v.47 no.3
• /
• pp.199-208
• /
• 2019

In this study, the community structures of the ectomycorrhizal (ECM) fungi in the roots of Abies koreana and Taxus cuspidata were investigated at different altitudes of Mt. Halla. We identified the collected ECM root tips based on morphological characteristics and phylogenetic analysis through sequencing of the rDNA ITS regions. From the roots of A. koreana and T. cuspidata, 11 species and 12 species were identified, respectively. The Shannon's index and species evenness and abundance of the ECM fungi were higher in the higher than lower regions, regardless of host plant species, however, the number of ECM root tips showed the opposite pattern. The community similarity among the ECM fungi in A. koreana was significantly higher than that among the ECM fungi in T. cuspidata or than that between A. koreana and T. cuspidata (p < 0.05). These results could be useful for the conservation and management of the habitat of A. koreana, which is threatened with extinction due to increasing ambient air temperature.

• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.207-216
• /
• 2014

In this work, we report detailed numerical analysis of the near-elliptic core index-guiding triangular-lattice and square-lattice photonic crystal fiber (PCFs); where we numerically characterize the birefringence, single mode, cut-off behavior and group velocity dispersion and effective area properties. By varying geometry and examining the modal field profile we find that for the same relative values of $d/{\Lambda}$, triangular-lattice PCFs show higher birefringence whereas the square-lattice PCFs show a wider range of single-mode operation. Square-lattice PCF was found to be endlessly single-mode for higher air-filling fraction ($d/{\Lambda}$). Dispersion comparison between the two structures reveal that we need smaller lengths of triangular-lattice PCF for dispersion compensation whereas PCFs with square-lattice with nearer relative dispersion slope (RDS) can better compensate the broadband dispersion. Square-lattice PCFs show zero dispersion wavelength (ZDW) red-shifted, making it preferable for mid-IR supercontinuum generation (SCG) with highly non-linear chalcogenide material. Square-lattice PCFs show higher dispersion slope that leads to compression of the broadband, thus accumulating more power in the pulse. On the other hand, triangular-lattice PCF with flat dispersion profile can generate broader SCG. Square-lattice PCF with low Group Velocity Dispersion (GVD) at the anomalous dispersion corresponds to higher dispersion length ($L_D$) and higher degree of solitonic interaction. The effective area of square-lattice PCF is always greater than its triangular-lattice counterpart making it better suited for high power applications. We have also performed a comparison of the dispersion properties of between the symmetric-core and asymmetric-core triangular-lattice PCF. While we need smaller length of symmetric-core PCF for dispersion compensation, broadband dispersion compensation can be performed with asymmetric-core PCF. Mid-Infrared (IR) SCG can be better performed with asymmetric core PCF with compressed and high power pulse, while wider range of SCG can be performed with symmetric core PCF. Thus, this study will be extremely useful for designing/realizing fiber towards a custom application around these characteristics.

• Food Science and Preservation
• /
• v.14 no.2
• /
• pp.142-147
• /
• 2007

We optimized braising time to improve the storage quality of braised kidney beans. The beans were prepared with different heating times between 25 and 50 min. and then stored at $10^{\circ}C$ for 20 day. Physical, chemical, microbiological, and organoleptic quality indices were monitored throughout storage. Longer braising times yielded products with lower concentrated brine coverage. Bis resulted in higher soluble contents and slightly lower water activities. Excessive heating time exposed the kidney beans to air and caused rapid microbial growth on the surfaces of the beans, which negatively affected product quality. The longest heating time of 50 min. also resulted in a large increase in product hardness. A braising time of 30 min. was best for preservation, as good sensory quality was mainatained.

• Physical Therapy Rehabilitation Science
• /
• v.8 no.2
• /
• pp.99-110
• /
• 2019

Objective: The aim of the present study was to develop a valid and reliable scale that measures the healthy life styles among young adults. Design: A methodological study design was employed to develop and validate the Healthy Lifestyle Screening Tool (HLST). Methods: The validity and reliability of the HLST were established in accordance with DeVellis' 8 steps guideline for tool development. The question items were generated based on literature reviews and interviews, which were then classified into 12 categories. The HLST was administered to 272 students attending a Korean university. The reliability was tested using Cronbach's alpha. The validity of the scale was examined with the mean inter-item correlations (MIIC) and factor analysis, and was also examined for content validity by experts. Results: The reliability of the HLST was found to be acceptable, as indicated by a Cronbach's alpha of 0.71. In the validity test, items with less than 80% "agreement" ratings on the content validity index by experts were revised. The MIIC values were greater than 0.25. A factor analysis of 36 items extracted 9 factors (i.e., four items per factor), which together explained 50.4% of the variance. The HLST consists of 36 items that measure 9 factors based on a 4-point Likert rating scale, with 4 items per factor, as follows: sunlight, water, air, rest, exercise, nutrition, temperance, trust, and general physical condition. High scores on the HLST are indicative of a healthy lifestyle (HL). Conclusions: The HLST is a valid and reliable scale that can be used to measure HL among young adults. Identification of HL by using the HLST can provide guidance to integrated therapeutic approaches along with conventional physical therapy.

• Journal of the Korea Convergence Society
• /
• v.10 no.6
• /
• pp.15-24
• /
• 2019

The development of "New Retailing" is still in its infancy. Theoretical research has just begun, showing the characteristics of practice leading theoretical research, that is, there is more practical exploration but relatively insufficient theoretical research. At present, the theoretical research and practice development of "New Retailing" is gradually clear. The future development trend is large-scale, no boundaries, and wisdom. The academic community should further study in depth with theory and practice, focusing on the deep integration of online and offline, the new logistics under "New Retailing", and the research direction of "New Retailing" driving supply chain transformation and reconstruction so as to better guide the development of "New Retailing". The purpose of the research is to sort out the research status and theoretical situation of "new retailing", so as to provide references for further research on "new retail" and guidance for practical development.

• Journal of Korean Society on Water Environment
• /
• v.36 no.6
• /
• pp.581-591
• /
• 2020

In this study, two types of reactors were operated to examine the properties of methanol uptake under the high-rate denitrification process. In a sequencing batch reactor, the denitrifying activity was enriched up to 0.80 g-N/g-VSS-day for 72 days. Then, the enriched denitrifying sludge was transferred to a completely stirred tank reactor (CSTR). At the final phase on Day 46-50, the nitrogen removal efficiency was around 100% and the total nitrogen removal rate reached 0.097±0.003 kg-N/㎥-day. During the continuous process, the sludge settling index (SVI30) was stabilized as 118.3 mL/g with the biomass concentration of 1,607 mg/L. The continuous denitrifying process was accelerated by using a sequencing batch reactor (SBR) with a total nitrogen removal rate of 0.403±0.029 kg-N/㎥-day with a high biomass concentration of 8,433 mg-VSS/L. Because the reactor was open to ambient air with the dissolved oxygen range of 0.2-0.5 mg-O2/L, an increased organic carbon requirement of 5.58±0.70 COD/NO3--N was shown for the SBR in comparison to the value of 4.13±0.94 for the test of the same biomass in a completely anaerobic batch reactor. The molecular analysis based on the 16S rRNA gene showed that Methyloversatilis discipulorum and Hyphomicrobium zavarzinii were the responsible denitrifiers with the sole organic carbon source of methanol.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.4
• /
• pp.61-75
• /
• 2021

Roadside greenery in the city is not only a means of reducing fine dust, but also an indispensable element of the city in various aspects such as improvement of urban thermal environment, noise reduction, ecosystem connectivity, and aesthetics. However, in studies dealing with the effect of reducing fine dust through trees in existing urban spaces, microscopic aspects such as the adsorption effect of plants were dealt with, structural changes such as the width of urban buildings and streets, and the presence or absence of trees, Impact studies that reflect the actual form of In this study, the effect of greenery composition applicable to urban space on PM2.5 was simulated through the microclimate epidemiologic model ENVI-met, and field measurements were performed in parallel to verify the results. In addition, by analyzing the results of fine dust background concentration, wind speed, and leaf area index, the sensitivity to major influencing variables was tested. As a result of the study, it was confirmed that the fine dust reduction effect was the highest in the case with a high planting amount, and the reduction effect was the greatest at a low background concentration. Based on this, the cost of planting street green areas and the effect of reducing PM2.5 were compared. The results of this study can contribute as a basis for considering the effect of pedestrian space on air quality when planning and designing street green spaces.