• 한국화재소방학회논문지
• /
• 제4권1호
• /
• pp.3-12
• /
• 1990

This study is to Present the air Pressurization system of staircase as a way to decrease the injury of human life which is suffocated by smoke when the fire break out in building. 1) The best among an air pressurization system of stairshaft Is multiple air Injection system established to be situated an air injection point in each layer. 2) If the air pressurization system is also applied to the elevator accessory room to use commonly, it can prevent from the smoke spreading and pollution inside building caused by stack effect of elevator shaft. 3) For the reasonable and safe escape and air pressurization system must be carried out from the project of basic shape of building under the close cooperation with architect and fire protection expert.

• 한국연소학회지
• /
• 제5권1호
• /
• pp.19-30
• /
• 2000

The characteristics of NOx emissions in pure hydrogen nonpremixed flames with coaxial air are analyzed numerically for the three model cases of coaxial air flames classified by varying coaxial air velocity and/or fuel velocity. In coaxial air flames, the flame length is reduced by coaxial air and can be represented as a function of the ratio of coaxial air to fuel velocity. Coaxial air decreases flame reaction zone, resulting in reducing flame residence time significantly. Finally, the large reduction of EINOx is achieved by the decrease of the flame residence time. It is found that because coaxial air can break down the flame self-similarity law, appropriate scaling parameters, which are different from those in the simple jet flames, are recommended. In coaxial air flames, the flame residence time based on the flame volume produces better results than that based on a cube of the flame length. And some portion of deviations from the 1/2 scaling law by coaxial air may be due to the violation of the linear relationship between the flame volume and the flame reaction zone.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.3-10
• /
• 2002

In this work, numerical parametric studies on spray combustion have been conducted. In simulation of turbulence, RNG ${\kappa}-{\varepsilon}model$ is adopted. Initial spray distribution is specified by Rosin-Rammler distribution function. Eddy break-up model is adopted as a combustion model. The parameters considered are inlet air temperature, swirl number, and SMD. With higher inlet air temperature, the axial velocities are increased and penetration of primary jet is stronger than that of lower inlet air temperature and temperature at the exit of combustor is more uniform. Combustion efficiency is improved with high inlet air temperature. The effect of swirl number on flow field is not significant. It affect only recirculation zone. So temperature at upstream of combustor is influenced. Combustion efficiency deteriorate as SMD of fuel spray increase.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권6호
• /
• pp.685-692
• /
• 2006

In a general centrifugal pump, if it is operated in a two-phase flow the activity of the impeller usually degrades and occasionally losses its function. However, the effect of break down of centrifugal pump due to entrained air has not been clarified yet. This paper shows the air-water two-phase flow characteristics of closed type and semi-open type impellers. In a sing1e-phase flow, closed-type impeller has higher efficiency and head. But in air-water two-phase flow semi-open type impeller's rates of decreases of efficiency and head are decreased.

• 한국대기환경학회지
• /
• 제10권4호
• /
• pp.245-251
• /
• 1994

We considered that characteristics of SO$_2$, concentration level and relations of the meteorological parameters and high pollution concentration from the data measured 7 air quality continuous monitoring stations during 4 years, from 1990 to 1993 in Pusan. The SO$_2$ concentration level showed decreasing trend yearly, it was maximum in Winter, minimum in Summer. The time of SO$_2$ peak concentration lagged from seashore to land because of break-down of the nocturnal inversion layer and seabreeze. Ihe correlations of daily SO$_2$, value between various air quality continuous monitoring stations were highest between Beomcheondong and Meongryundong, lowest between Daeyeondong and Sinpyeongdong because of difference of air Pollution emission sources characteristic. The meteorological parameters affecting SO$_2$ concentration level were minimum temperature, relative humidity, wind speed and air pressure. The SO$_2$ high pollution($\geq$95ppb) occurred almost in Winter, particulaly in such day showing lower wind speed and higher air pressure. Elementary SO$_2$ high Pollution Predictor were high pressure system and stability of lower atmosphere.

• 설비공학논문집
• /
• 제26권4호
• /
• pp.145-150
• /
• 2014

Many studies are being conducted with the aim of reducing the energy consumption in data centers, which are one of the highest consumers of energy. The use of an air-side economizer system that uses external air during intermediate and winter seasons is being considered for reducing the energy consumption of air conditioners. In this study, using the energy simulation, we evaluated the energy performance of a central chilled water cooling system and air-side economizer system in domestic data centers. Further, the cost-effectiveness of the air-side economizer was analyzed through Life-Cycle Cost Analysis. The results showed that with the use of air-side economizer systems, the energy costs increased as the applied filter grade increased; however, unlike existing central chilled water systems, it would break even within 2 years.

• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.1948-1958
• /
• 1996

Experimental and theoretical studies on the air-assist coaxial atomizer have been continuously carried out for a long time. But now the importance of the theoretical study is tending to increase as with the development of computer. This study is concerned to the spray modelization, especially, the instability of the liquid jet surrounded by the air stream which flows with high velocity. To study the phenomena of the break up, we used the linear theory based on the classical Kelvin-Helmholtz theory for capillary wave at a simple interface and we investigated the variation of liquid core radius. As a result, we obtained that the drop diameter and the variation of the liquid core radius predicted by using our model are reasonable.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.225-229
• /
• 2011

The aluminum composite panel are widely used for the external materials of high rise building because of well insulation of heat and sound and improved Constructability. However, the polyethylene in main material of the aluminum composite panel shows weakness in thermal and fire resistances. For this reason, flame is spread more quickly when the fire break out. Therefore, the potentiality of fire spread to the exterior wall is high due to difficulty of early extinguishment and effect of external air. In this study, numerical investigation was performed by using FDS program for flame spread characteristics with various external air velocity and direction in ten-story building with the aluminum composite external materials. As a result, the flame spread velocity is 0.134m/s and it takes 224 seconds for flames to spread to the 10th floor without external air velocity. however, the flame spread velocity decreases 40% and it takes 348 seconds for flames to spread to the 10th floor when external air velocity is 2.5 m/s. and air direction is little effect compared to air velocity.

• 건축역사연구
• /
• 제7권3호
• /
• pp.137-149
• /
• 1998

The purpose of this study is to learn from a lesson of the historical fact, the Team 10's break away from the CIAM, which is selected as the most important event in the whole 20th century architecture by author as a historian. The CIAM, organized in 1928 by leading European architects in order to propose new architecture in the industrial era, expanded to the world, met almost annually with an idea of economic efficiency, new functional order, and industrial production for thirty years. Young architects had conflicted with old established group from 6th congress, and after 10th congress they met independently in 1959; the CIAM was disappeared and the Team 10 was born. Main issue of the break-away was human aspect. The Team 10 started from real man, concept of 'human contact', 'sense of community', and 'belonging' instead of abstract functional order. Although CIAM did not suggest inhumane architecture, their biological criteria with sunlight, air, sufficient site became physical determinism. Critique against the Team 10, unsuccess for making humane architecture leads to underestimation like a generational hegemony struggle. However, architect is not specialist of life but form. Historical reevaluation for Team 10 should be that they are the first group to raise an human issue in architecture. Success or not to solve the problem belongs to another domain. After 1960, modern architecture was attacked from the common people, not clients but 'users'. Academic circle tried to solve the problem with behavioral approach through a clear process, 'design method' and with phenomenological approach on real human experience. However practice became reactionary tendency, to make form a little complex, they became post-modern and deconstruction form. Failure of the Team 10's form proved that a complex form does not necessarily make a good life of people. In the Korean historic situation of colony ruling, confusion of liberation, and the War, we did not know the existence of both CIAM and Team 10. After 1970s' economic development, we have just copied Western form from Modern via Post-Modern to Deconstruction. If we make architecture people mattered, we should start from the basic, learning from the Team's break-away, instead of copying.

• 한국환경농학회지
• /
• 제41권3호
• /
• pp.199-205
• /
• 2022

BACKGROUND: The freezing injury by pruning can be reduced by suspending pruning work when severe cold weather (-23 to -49℃) is forecast. Minimum air temperature of the study area, Gunwi region at February 3, 2012 was -21.9℃, and the subzero temperature continued until April 8, 2012. This study was conducted in two years to investigate the effect of delaying winter pruning until full bloom on shoot growth and fruit quality of 'Fuji'/M.9 apple trees. METHODS AND RESULTS: The time of pruning were March 26 for dormant, April 3 for bud break, and May 2 for full bloom. The winter pruning at full bloom significantly reduced fruit weight for two years compared with the control (winter pruning at dormant), and shoot growth was reduced only in the following year. There was no significant effect of delaying winter pruning at bud break on soluble solid content, fruit red color, return bloom, and pruning weight for two years compared with the control. CONCLUSION(S): These results indicated the delaying winter pruning at bud break of 'Fuji'/M.9 apple tree did not offer any disadvantage over comparable dormant pruning, since the fruit quality was not affected. The delayed pruning at full bloom resulted in decreased fruit weight, though shoot growth, fruit quality, and return bloom were not affected by the delayed pruning. So, the delayed pruning should be considered carefully only for the fruit tree orchards in diseases.