• 콘크리트학회논문집
• /
• 제16권2호
• /
• pp.155-162
• /
• 2004

초기재령 콘크리트의 탄성계수 변화와 크리프 및 건조수축 현상을 고려하는 강 합성 거더의 시간종속적 처짐해석을 수행하였다. 초기재령 콘크리트의 탄성계수 발현과정을 고려한 구성관계는 총 응력-변형률 관계를 Taylor의 선형급수 확장을 이용하여 기준시간에 관하여 확장함으로써 시간종속적 증분형태로 유도하였다. 강 박스거더의 단면형상 변화 위치와 지점부를 기준하여 거더를 분할하고 분할된 구간에서 단면해석을 통해 곡률을 구하여 2차 다항식으로 가정한 처짐곡선에 경계조건을 적용함으로써 처짐곡선의 증분관계식을 유도하였다. 부모멘트 구간의 강 박스 하단에 콘크리트를 타설한 이중합성 박스거더의 초기재령 거동해석을 수행하였으며, 강 박스 하단의 콘크리트 타설두께가 거더의 거동에 주는 영향을 수치해석 결과를 통해 분석하였다. 끝으로, 보 요소를 이용한 유한요소해석 결과와 개발된 단면해석법을 이용한 해석 결과를 비교함으로써 정확성을 검증하였다.

• 마이크로전자및패키징학회지
• /
• 제14권2호
• /
• pp.23-33
• /
• 2007

RoHS, WEEE 등에서의 각종 환경문제에 대한 제약으로 Pb의 사용에 대한 규제가 점차 증가 하고 있다. 따라서 무연 솔더에 대한 관심이 증폭되고 있으며, 마이크로 전자공학 산업에서 무연 솔더를 사용하기 위해서는 여러 가지 새로운 신뢰성 평가기준을 요구한다. 예를 들어 높은 온도공정을 만족하는 패키지, 새로운 솔더가 야기하는 복잡한 기계적 고장, 그리고 제품 수명을 최대한 유지시켜 줄 수 있는 무연 솔더 소재의 선택을 포함한다. 본 연구에서는 국내산 솔더바 소재를 사용하여 접합부의 기계적 특성 및 젖음성, 퍼짐성 등의 품질평가 방법을 해외규격과 비교하여 시험하고 새로운 평가기준을 찾고자 하였다. 젖음성 및 퍼짐성 시험 결과 Sn-0.7Cu 무연 솔더 소재는 평가기준을 충분히 만족하였다. 또한 이 소재를 사용한 솔더 접합부의 전단시험 결과, 열충격 및 고온방치 시험 후에도 솔더링 상태의 초기강도와 비교하여 접합부의 전단강도가 크게 저하하지 않은 상태에서 기준치를 크게 상회하였다.

• 한국주조공학회지
• /
• 제39권6호
• /
• pp.103-109
• /
• 2019

Cu-added SKD11 was manufactured through the casting process and the effects of Cu addition with different contents (0, 1, 2 and 3 wt%) and aging treatment on microstructure, mechanical characteristics such as tensile strength and hardness, and thermal conductivity were investigated. The microstructure was analyzed by FE-SEM and XRD, the mechanical characteristics by Rockwell hardness tester and Tensile tester, and the thermal conductivity by Laser flash. As a result, SKD11 containing Cu had higher hardness than as-received SKD11. The hardness of as-cast SKD11 containing 1 wt% Cu was 42.4 HRC, whereas the hardness of asreceived SKD11 cast alloy was 19.5 HRC, indicating that the hardness was greatly improved when Cu was added. In the case of tensile strength, Cu-added SKD11 cast alloy had lower tensile strength than as-received SKD11, and the tensile strength tended to increase as Cu content increased. After heat treatment, however, tensile strength of as-received SKD11 was significantly increased, whereas in the case of Cu-added SKD11, as the Cu contents increased, the tensile strength increased less and even reduced at 3 wt% Cu. The thermal conductivity of Cu-added SKD11 cast alloy was about 13 W m^-1 K^-1, which was lower than that of the asreceived SKD11 cast alloy (28 W m^-1 K^-1). After the heat treatment, however, the thermal conductivity of as-received SKD11 was reduced, while the thermal conductivity of the SKD11 added with Cu was increased. Thermal conductivity was generally larger with less Cu content, and this tendency became more pronounced after heat treatment.

• 한국식품조리과학회지
• /
• 제22권3호통권93호
• /
• pp.337-345
• /
• 2006

영지버섯, 장수버섯, 상황버섯을 곡물에서 배양하는 고체재료 발효방법을 개발하였으며, 발효된 곡물을 이용하여 즙장을 제조하고 관능검사를 실시함으로써 기능성식품으로서의 이용 가능성을 검토하였다. 담자균의 고체재료 배양을 위하여 사용된 곡물의 특성을 조사한 결과, 냉침시간에 따른 곡물의 수분함량 변화는 메주콩이 10시간, 보리는 6시간, 율무가 4시간, 밀이 12시간만에 최대수화 시간에 도달하였으나 최종 수분함량이 $30{\sim}48\;%$로서 버섯 균사체가 생장하기에는 부족한 수분함량을 보였다. 담자균사체의 대량배양 조건실험을 실시한 결과, 냉침에 의해 최대수화에 도달한 곡물을 배양용기에 담고, 액체배양 후 균질화한 담자 균사체를 곡물에 접종함으로써 접종초기 짧은 시간에 균사가 완전히 활착되도록 할 수 있었다. 또한 균사 배양중기에 멸균 증류수를 첨가함으로써 균사의 활력을 유지시킬 수 있었다. 곡물에 배양된 담자균의 균사체량을 나타내는 glucosamine의 함량은 장수버섯과 상황버섯이 배양된 율무에서 특히 높은 함량을 나타내었고 영지버섯이 배양된 곡물의 경우는 밀에서 가장 높은 함량을 나타내었다. 담자균사체에 의해 발효된 곡물을 이용하여 즙장을 제조하고 관능검사를 실시한 결과, 영지버섯 균사체가 배양된 곡물이 가장 우수하였는데, 그 중 콩에 율무를 혼합한 시료가 가장 우수한 것으로 나타났으며, 숙성기간이 길어짐에 따라 전반적으로 기호도가 약간씩 상승하였다.

• Computers and Concrete
• /
• 제19권5호
• /
• pp.579-588
• /
• 2017

Creep and shrinkage are the main types of volume change with time in concrete. These changes cause deflection, cracking and stresses that affect durability, serviceability, long-term reliability and structural integrity of civil engineering infrastructure. Although laboratory test may be undertaken to determine the deformation properties of concrete, these are time-consuming, often expensive and generally not a practical option. Therefore, relatively simple empirically design code models are relied to predict the creep strain. This paper reviews the accuracy of creep and shrinkage predictions of reinforced concrete (RC) shear walls structures strengthened with carbon fibre reinforced polymer (CFRP) plates, which is characterized by a widthwise varying fibre volume fraction. This review is yielded by three commonly used international "code type" models. The assessed are the: CEB-FIP MC 90 model, ACI 209 model and Bazant & Baweja (B3) model. The time-dependent behavior was investigated to analyze their seismic behavior. In the numerical formulation, the adherents and the adhesives are all modelled as shear wall elements, using the mixed finite element method. Several tests were used to demonstrate the accuracy and effectiveness of the proposed method. Numerical results from the present analysis are presented to illustrate the significance of the time-dependency of the lateral displacements and eigenfrequencies modes.

• 한국컴퓨터정보학회논문지
• /
• 제19권12호
• /
• pp.219-225
• /
• 2014

Gompertz modeling은 고령화 사회에 접어들기 시작하며 노령인구 예측에 성공적인 결과를 보여줌으로써 최근 많은 주목을 받고 있다. 또한 항암 치료제의 독성으로 인해 발생할 수 있는 부작용을 미연에 방지하고자 보다 효과적인 치료제의 사용에 관한 의료 생체분야에서 활발한 개발이 시도되어 왔으나 전임상 및 임상실험으로의 응용이 가능한 모델링은 극히 제한적이며, 모델링의 검증을 위한 생체실험의 분석 시스템의 최적화가 힘들다는 한계가 있다. 본 논문에서는 Gompertz modeling을 응용하여 새로운 겸형적혈구의 약물유출 예측시스템을 개발하고, 여기된 광증감제의 겸형적혈구 부착을 통해 효과적인 약물유출 제어방법을 ex-vivo 실험을 통해 검증하여 최적화된 예측 시스템의 결과를 비교 분석 할 수 있었다. 따라서 이와 같이 최적화된 Gompertz modeling을 이용한 새로운 약물전달 시스템이 항암치료에 반영된다면 부작용에 기인한 환자들의 신체적 고통과 치료를 위한 경제적 부담을 경감시키는 효과를 유도하며, 나아가 항암 치료제의 정확한 전달률을 증가시켜 보다 효과적인 항암치료를 기대할 수 있다.

• 한방안이비인후피부과학회지
• /
• 제26권1호
• /
• pp.1-18
• /
• 2013

Objective: Recently the demands for the effective and safe depigmentative and anti-aging agents of the skin have increased due to the medical, pharmaceutical and cosmetic reasons. The purpose of this study is to investigate the MKG(Methanol Extract of Kaempferia galanga) and their dermal bioactivity properties related to cosmeceuticals such as depigmentation. Methods: We assessed inhibitory effects of MKG on melanin production in B16/F10 melanoma cells, on mushroom tyrosinase activity, effects of MKG on the expression tyrosinase, TRP-1, TRP-2, GSK-$3{\beta}$, CREB, MITF in B16/F10 melanoma cells without cytotoxicity range. Cell viability was measured by MTT assay and tyrosinase activity was assessed using by DOPA staining, western-blot analysis. We measured inhibition of melanin synthesis and tyrosinase activity by down-regulation of melanogenic enzyme expressions in ${\alpha}$-MSH induced melanogenesis B16/F10 melanoma cells. Results: MKG inhibited tyrosinase-activity, total melanin contents and dendrite out-growth. MKG inhibited melanogenesis by down-regulation of tyorsinase, TRP-1, TRP-2, CREB, and MITF in B16/F10 cells. The treatment with MKG at the 12.5, $25{\mu}g/ml$ level significantly inhibited the melanin synthesis induced ${\alpha}$-MSH in B16/F10 melanoma cells compared with untreated control. Conclusion: These results suggest that MKG inhibit melanin biosynthesis which is involved in hyper-pigmentation. So MKG is considered to be used as a whitening components reducing cytotoxicity.

• The Plant Pathology Journal
• /
• 제29권4호
• /
• pp.440-445
• /
• 2013

Balloon flower (Platycodon grandiflorum) is a kind of mountain herbs whose roots have restorative properties and the cultivating acreage of balloon flower has been steadily increasing in Korea. More frequent rain and high amount of rainfalls as a result of climate changes predisposed balloon flower to the outbreaks of root rot at high-density cultivation area in recent years. Root crowns were usually discolored into brown to blackish brown at first and the infected plants showed slight wilting symptom at early infection stage. Severely infected roots were entirely rotted and whole plants eventually died at late infection stage. The overall disease severities of root rot of balloon flower were quite variable according to the surveyed fields in Jeonnam, Gyeongnam and Jeju Provinces, which ranged from 0.1% to 40%. The root rot occurred more severely at the paddy or clay soils than the sandy soils and their severities were much higher at lowland than upland in the same localty. The disease increased with aging of the balloon flower. The causal fungi were identified as Fusarium solani and F. oxysporum on the basis of their mycological characteristics. The optimum temperature ranges of their mycelial growths was found to be $24^{\circ}C$. The pathogenic characters of F. solani and F. oxysporum treated by artificial wounding inoculation on healthy roots of balloon flower revealed that F. solani was more virulent than F. oxysporum. This study identified the causal agents of root rot of balloon flower as Fusarium solani and F. oxysporum, probably for the first time.

• Biomolecules & Therapeutics
• /
• 제21권6호
• /
• pp.442-446
• /
• 2013

Here in this study, we isolated 1,2,3,4,6-penta-O-galloyl-${\beta}$-D-glucose (PGG) from Curcuma longa L. and elucidated the lifespan-extending effect of PGG using Caenorhabditis elegans model system. In the present study, PGG demonstrated potent lifespan extension of worms under normal culture condition. Then, we determined the protective effects of PGG on the stress conditions such as thermal and oxidative stress. In the case of heat stress, PGG-treated worms exhibited enhanced survival rate, compared to control worms. In addition, PGG-fed worms lived longer than control worms under oxidative stress induced by paraquat. To verify the possible mechanism of PGG-mediated increased lifespan and stress resistance of worms, we investigated whether PGG might alter superoxide dismutase (SOD) activities and intracellular ROS levels. Our results showed that PGG was able to elevate SOD activities of worms and reduce intracellular ROS accumulation in a dose-dependent manner.

• 한국재료학회지
• /
• 제17권11호
• /
• pp.587-592
• /
• 2007

Al-42wt%Nb powder was prepared by high-energy mechanical milling(HEMM). The particle size, phase transformation and microstructure of the as-milled powder were investigated by particle size distribution (PSD) analyzer, scanning electron microscopy (SEM), X-ray diffractometery (XRD), transmission electron microscopy (TEM)and differential thermal analysis (DTA). The milled powders were heated to a sintering temperature at 1000C with under vaccum with vaccum tube furnace. Microstructural examination of sintered Ti-42wt%Nb alloy using 4h-milled powder showed Ti-rich phases (${\alpha}$-Ti) which are fine and homogeneously distributed in the matrix (Nb-rich phase: ${\beta}$-Ti). The sintered Ti-42wt%Nb alloy with milled powder showed higher hardness. The microstructure of the as quenched specimens fabricated by sintering using mixed and milled powder almost are same, but the hardness of as quenched specimen fabricated by using mixed powder increased due to solution hardening of Nb in Ti matrix. The aging effect of these specimens on microstructural change and hardening is not prominent.