• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.361-364
• /
• 1996

Aging diagnosis system using partial discharge(PD) is being highlighted as a research area. But the application of PD requires complicated analysis method because the PD has complex progressing forms. In this paper, It has been developed to the PD diagnosis system using neural network(NN). As a result after NN learning, the recognized rate was represented about 85%. The safety area is possible to express the second output of NN in this experiments.

• Sleep Medicine and Psychophysiology
• /
• v.8 no.1
• /
• pp.18-21
• /
• 2001

The change of sleep pattern is one of the most often altered normal physiological functions in elderly people. Besides normal change of sleep, insomnia and sleep apnea syndrome (SAS) are (one of) the main complaints. In addition, parasomnia is also frequent in this age group. Several parasomnias frequently found in the elderly are reviewed. Periodic limb movements in sleep (PLMS), restless legs syndrome (RLS), and REM sleep behavior disorder are the most frequent parasomnias in old age. Most parasomnias could be diagnosed by polysomnography, and be treated easily. Therefore, early and precise diagnosis and management for parasomnia in aging people are needed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.5-7
• /
• 1988

Effect of isothermal aging on the crystallization of $Fe_{78}B_{13}Si_{9}$ metallic glass has been investigated by electrical resistivity, X-ray measurements, bending test, thermal analysis and transmission electron microscopy. Amorphous $Fe_{78}B_{13}Si_{9}$ alloy was annealed isothermally for 5 to 1200 mon. between 300 C and 540 C. It has been found that close relation between relative resistivity and X-ray diffraction pattern showed. The crystalline peak of $\alpha$-(Fe, Si) and Fe$_2$B are detected by X-ray experiment. The crystalline phases observed by TEM show $\alpha$-(Fe, Si) and Fe$_3$B with dendritic and cylindrical morphology, respectively. It has been also found that the embrittleness of aged samples rapidly increased with the crystallization and was shown before the crystallization.th the crystallization and was shown before the crystallization.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.3
• /
• pp.212-224
• /
• 2010

The usefulness of the magnetic camera for non-destructive testing of aging aircraft is discussed in this paper. The magnetic camera can be used f magnetic particle testing(MT), magnetic flux leakage testing(MFLT), eddy current testing(ECT) and penetration testing(PT). It measures the distribution of a magnetic field and visualizes the magnetic pattern. Near and far side cracks, fatigue, thickness degradation, and cracks under rivets have been detected. The possibility of quantitative evaluation was also examined. Using indirect experiments, we verified the detection ability of the sensor for cracks in titanium and advanced composite materials.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.379-384
• /
• 1997

High quality MCM-41 is prepared from a gel of molar composition SiO2:0.20 CTACl:0.18 TMAOH:25 H2O aged at 20 ℃ for 24 hours before crystallization lasting for 48 hours. The (110) and (200) peaks of XRD pattern of high quality MCM-41 are unusually well resolved and the FWHM (full-width-at-half-maximum) of the (100) peak is 0.13° for as-prepared MCM-41 and 0.21° for calcined one, which indicate well-developed crystals. The properties of the crystal depend on the source and concentration of the reactants and the gel aging time. There is no induction period in the course of the synthesis, which is conveniently monitored by pH measurement. Gel aging, during which a spatial distribution of silicate polyanions and micellar cations is established, is essential for preparing high quality MCM-41. Surfactants with the same cationic organic group but different counteranions change the crystallization behavior. Highly basic gel (pH=12.6) favours the lamellar product; the quality of MCM-41 is lower as insufficient TMAOH is available to dissolve the silica.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.5
• /
• pp.117-126
• /
• 2020

In this study, a 3D simulation program was used to produce a bodice prototype of a middle-aged male in their 40s and 50s and then analyze the appearance evaluation and airgap, sectional view, color distribution through virtual wearing to compare and analyze the differences between patterns. Through this, it was intended to provide basic data necessary for pattern development to companies that manufacture and produce clothing for middle-aged men. As a result of analyzing, J pattern was analyzed as the most suitable body shape pattern for middle-aged men. E pattern was too tight and L pattern and N pattern had too much spaces. However, J patternt was analyzed that correction was necessary in setting center back and center front length. The aging phenomenon in which the back is slightly bent forward and shoulders are also inclined is expected to appear, so it is necessary to adjust the front-to-back length, shoulder angle, and shoulder length. It is considered that after developing the research pattern by modifying J pattern, it is necessary to develop a body shape prototype for middle-aged men through actual clothing experiments on middle-aged men.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.54-61
• /
• 2004

The engine-out flow is highly transient and hot, and may place tremendous thermal and inertial loads on a closed-coupled catalyst. Therefore, time-dependent and detailed flow and thermal field simulation may be crucial. The aim of this study is to develop combined chemical reaction and multi-dimensional fluid dynamic mathematical model and to study the effect of unsteady pulsating thermal and flow characteristics on thermal reliability of closed-coupled catalyst. The effect of cell density on the conversion performance under real running condition is also investigated. Unlike previous studies, the present study focuses on coupling between the problems of pulsating flow pattern and catalyst thermal response and conversion efficiency. The results are expressed in terms of temporal evolution of flow, pollutant and temperature distribution as well as transient characteristics of conversion efficiency. Fundamental understanding of the flow and thermal phenomena of closed-coupled catalyst under real running condition is presented. It is shown that instants of significantly low values of flow uniformity and conversion efficiency exist during exhaust blowdown and the temporal varaition of flow uniformity is very similar in pattern to one of conversion efficiency. It is also found that the location of hot spot in monolith is directly affected by transient flow pattern in closed-coupled catalyst.

• Journal of Integrative Natural Science
• /
• v.3 no.3
• /
• pp.181-185
• /
• 2010

This study was conducted to find associations of obesity, exercise pattern and nutrient intakes in Korean American immigrants residing in North Western parts of USA. The structured survey forms and food frequency questionnaire that covered 67 food items were used. There was a significant difference in height for subjects by gender and age. However, the weight of females became heavier with increasing age in contrast to males. There was a great difference in BMI between the male and female group in the youngest adult group compared to the aging adults. Significant age difference in exercise pattern was shown. Dietary fiber and sodium intakes were higher in the elderly than young ones in female group. In the same young adult group Zn intakes was the highest in the male group and the lowest in the female group. Folate intakes were higher in females than in males. Strong positive correlations among height, weight and BMI were shown. Zn intake was significantly correlated with weight, height, and exercise pattern in the study. Furthermore, Zn was correlated with sodium, vitamin B6, folate, vitamin E and cholesterol.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5605-5623
• /
• 2016

We propose a face recognition method that utilizes the LCP face descriptor. The proposed method applies a LoG mask to extract a face contour response, and employs the LCP algorithm to produce a binary pattern representation that ensures high recognition performance even under the changes in illumination, noise, and aging. The proposed LCP algorithm produces excellent noise reduction and efficiency in removing unnecessary information from the face by extracting a face contour response using the LoG mask, whose behavior is similar to the human eye. Majority of reported algorithms search for face contour response information. On the other hand, our proposed LCP algorithm produces results expressing major facial information by applying the threshold to the search area with only 8 bits. However, the LCP algorithm produces results that express major facial information with only 8-bits by applying a threshold value to the search area. Therefore, compared to previous approaches, the LCP algorithm maintains a consistent accuracy under varying circumstances, and produces a high face recognition rate with a relatively small feature vector. The test results indicate that the LCP algorithm produces a higher facial recognition rate than the rate of human visual's recognition capability, and outperforms the existing methods.

• Journal of Fashion Business
• /
• v.17 no.5
• /
• pp.120-137
• /
• 2013

Nowadays, due to the increase of the aging population and the decreased size of the traditional nuclear family, pet dogs are considered to be important member of the family. The pet industry has been growing every year; subsequently, is essential to develop practical patterns and designs which are appropriate for the structure and movement of pet dogs. However, studies for developing a new form of pet dog's wear patterns and designs are limited. This study develops an all-in-one pattern which is based on pet dog's size, designs pet dog's wear items based on all-in-one patterns, and provides support to the manufacture of pet dog's wear. The results are as follow: 1) An analysis for the categories and design characteristics of all-in-one pet dog's wear according to the research from the online pet dog's wear shopping sites is provided. Eight categories are classified as follows: rompers, body suit, coveralls, training suit, special clothing, overalls, rain coat, and hanbok. 2) The production of all-in-one pet dog's wear basic pattern based on the basic bodice pattern from the prior studies and the manufacturer's patterns are being displayed. 3) Developments of the patterns and designs for eight all-in-one clothing consider the design characteristics and the situations. 4) Developments of the previous eight items illustrate the results of this research.