• International Journal of Concrete Structures and Materials
• /
• 제8권4호
• /
• pp.309-313
• /
• 2014

The volume fraction of the coarse aggregate in the conventional plastic concrete is controlled relatively low to ensure a required workability. In this paper, a new type of coarse aggregate interlocking concrete with strength ranging from C30 to C80 was prepared with scattering-filling aggregate process. The strength of concrete prepared with this method increases obviously whereas the shrinkage decreases significantly, the cement dosage in the concrete decreased 20 % at the same time. The microhardness of the ITZ between the cement paste and scattering-filling aggregate is higher than that of the original aggregate, the ITZ become narrower and tighter also. The interlocking and more even distribution of the coarse aggregate and the water absorption of the addition of extra amount of coarse aggregates contribute to the strength and performance improvement of the concrete prepared with scattering-filling aggregate process.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.67-74
• /
• 2012

PURPOSES: In this study the influence factors related to abrasion resistance of interlocking concrete block have been evaluated, and comparisons between various domestic and foreign abrasion test methods was also accomplished. METHODS: The modified rotational cutting method suggested in ASTM C 944 was applied. Surface materials with different types of fine aggregate such as crushed sand, sea sand, and mixture of crushed and sea sand were tested to compare the aggregate effect for abrasion resistance. RESULTS: The different surface mixtures with various W/C ratios, mortar and fly ash ratios have been investigated for functional and economical considerations. CONCLUSIONS: This study had obtained reliable results by changing diamond blade of rotating cutter. Therefore, in order to improve the abrasion resistance of interlocking concrete block for road, a new mix design was proposed.

• 한국건축시공학회지
• /
• 제7권2호통권24호
• /
• pp.93-98
• /
• 2007

Waste of Plastic that is waste tile and waste interlocking block result, waste tile and waste interlocking block that execute an experiment to foretell practical use possibility availability as recycled aggregate for concrete giving change in the principal parts rate for coarse aggregate recycled aggregate appeared in the world by available thing to coarse aggregate to rate 10% but necessity that present amount used establishing material application standard that is crushed than uniform application standard to receive entropy of re-fresh concrete quality is judged to be.

• 콘크리트학회논문집
• /
• 제25권1호
• /
• pp.3-9
• /
• 2013

초고강도 콘크리트에서 잔골재로 세척사 대신에 전기로 산화 슬래그를 사용했을 경우, 재령 91일 압축강도가 약 15 MPa 정도 향상되었다. 압축강도가 향상된 원인을 규명하기 위해 잔골재의 Ca 성분 용출 특성을 고찰하였고, 잔골재와 페이스트 계면에서의 미세조직, 기공율, 미소경도 및 Ca/Si 몰비를 검토하였다. 그리고 잔골재 형상에 의한 강도 증진 효과를 알아보기 위해 잔골재의 표면 거칠기를 AFM으로 측정하였다. 실험 결과, 초고강도 콘크리트에서 전기로 산화 슬래그 잔골재 사용에 의한 강도 증진 기구는 화학적 기구와 물리적 기구로 구분할 수 있다. 화학적 기구로는, 전기로 산화 슬래그에서 함유되어 있는 가용성 Ca 성분이 용출되어 잔골재와 페이스트 사이에 반응생성물을 형성시켜 조직을 치밀화 시킴으로 잔골재-페이스트간의 부착력을 증진 시키는 것으로 나타났다. 그리고 물리적 기구로는, 전기로 산화 슬래그 잔골재는 세척사에 비해 표면의 굴곡도가 2배 정도 커서, 잔골재와 페이스트 간의 interlocking strength를 증가시킴으로서 압축강도 발현에 기여하는 것으로 판단했다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.327-332
• /
• 2003

The incinerated municipal waste can be classified into two general types of ash; fly ash and bottom ash. The fly ash is appointed as specified waste, because it contains harmful heavy metals, ie Pb , Cd, etc. more than permitted standard index. The purpose of this study is to manufacture the non-sintering artificial aggregates using municipal waste incineration fly-ash and to evaluate their applications as coarse aggregates in concrete interlocking block. The test results of water absorpsion, strengths of the concrete block using artificial aggregates showed that the artificial aggregates could be used in part of 10-20% as coarse aggregate in concrete block.

• 한국농공학회논문집
• /
• 제48권7호
• /
• pp.25-31
• /
• 2006

Permeable polymer concretes can be applied to roads, sidewalks, river embankment, drain pipes, conduits, retaining walls, yards, parking lots, plazas, interlocking blocks, etc. This study was to explore a possibility of using bottom ash as filler and recycled coarse aggregate of industrial by-products for permeable polymer concrete. The tests carried out at $20{\pm}1^{\circ}C$ and $60{\pm}2%$ relative humidity. At 7 days of curing, unit weight, void ratio, compressive and flexural strength and coefficient of permeability ranged between $1,652{\sim}1,828kgf/m^{3},\;15{\sim}29+%,\;18.2{\sim}24.5\;MPa,\;6.4{\sim}8.4\;MPa\;and\;6.8{\times}10^{-2}{\sim}1.7{\times}10^{-1}\;cm/s$, respectively. It was concluded that the bottom ash and recycled coarse .aggregate can be used in the permeable polymer concrete.

• 한국농공학회논문집
• /
• 제52권1호
• /
• pp.69-77
• /
• 2010

Research on permeable pavement like asphalt and concrete pavement with porous structure has been increasing due to environmental and functional need such as reduction of run off and flood, and increase and purification of underwater resource. This study was performed to evaluate permeability, strengths and durability of permeable polymer concrete (PPC) using recycled aggregate that is obtained from waste concrete. Also, 6mm length of polypropylene fiber was used to increase toughness and interlocking between aggregate and aggregate surrounded by binder. In the test results, regardless of kinds of aggregates and fiber contents, the compressive strength and permeability coefficient of all types of PPC showed the higher than the criterion of porous concrete that is used in permeable pavement in Korea. Also, strengths of PPC with increase polypropylene fiber volume fraction showed slightly increased tendency due to increase binder with increase of fiber volume fraction. The weight reduction ratios for PPC after 300 cycles of freezing and thawing were in the range of 1.6~3.8 % and 2.2~5.6 %, respectively. The weight change ratio was very low regardless of the fiber volume fraction and aggregates. The weight reduction ratios of PPC with fiber and aggregate were in the range of 1.3~2.7 % and 2.2~3.2 % after 13 weeks and was very low regardless of the fiber volume fraction and aggregates.

• 농업과학연구
• /
• 제37권2호
• /
• pp.277-283
• /
• 2010

Research on permeable pavement like asphalt and concrete pavement with porous structure has been increasing due to environmental and functional need such as reduction of run off and flood. This study was performed to evaluate void ratio, permeability coefficient, and compressive strength of permeable polymer concrete (PPC) using crushed and recycled coarse aggregate that is obtained from waste concrete. Also, 6 mm length of polypropylene fiber was used to increase toughness and interlocking between aggregate and aggregate surrounded by binder. Binder and filler used were unsaturated polyester resin and CaCO3, respectively. The mix proportions were determined to satisfy the requirement for the workability and slump according to aggregate sizes 5~10 mm. In the test results, regardless of kinds of aggregates and fiber contents, the void ratio, permeability coefficient and compressive strength of all types of PPC showed the higher than the criterion of porous concrete that is used in permeable pavement in Korea. Also, strengths of PPC with increase polypropylene fiber volume fraction showed slightly increased tendency due to increase binder with increase of fiber volume fraction. Accordingly, polypropylene fiber and recycled coarse aggregate can be used for permeable pavement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.723-726
• /
• 2004

Porous polymer concrete can be applied to roads, sidewalks, river embankment, drain pipes, conduits, retaining walls, yards, parking lots, plazas, interlocking blocks, etc. This study is to examine a content ratio of polypropylene fiber to improve bending strength, impact resistance and freezing and thawing rssistance of porous polymer concrete. Also, this study is performed to develop the porous polymer concrete using recycled coarse aggregate and blast furnace slag for application of structures needed permeability. At 7 days of curing, compressive strength, flexural strength, water permeability and flexural load are in the ragge of $17\~21MPa,\;5\~7MPa,\;4.1\times10^{-2}\~7.7\times10^{-2}cm/s$, respectively. It is concluded that the recycled aggregate can be used in the porous polymer concretes.

• 콘크리트학회지
• /
• 제2권3호
• /
• pp.81-88
• /
• 1990

본 논문에서는 방사선 자미용 중량콘크리트에 사용되는 국외의 자철광골재 콘크리트에 대하여 자철광 골재의 골재특성을 분석하고, 굳지않은 콘크리트의 슬럼프등 특성과 압축강도등 역학적특성을 분석하므로써 중량콘크리트 시공 응용에 한 참고자료를 제시하고자 하였다. 실험결과 자철광 골재 콘크리트의 슬럼프치는 천연골재의 경우보다 50% 정도 작게 단위용적중량은 50%정도 크게 나타났고, 시멘트 종류에 따른 압축강도 영향은 보통보다 중용열 포틀랜드시멘트에서 제조회사 차이로 5~19% 크게 나타났고, 잔골재의 영향은 압축강도 340kg/$cm^2$를 기준으로 그 이상 강도에서는 천연 잔골재, 그 이상 강도에서는 자철광 잔골재 콘크리트에서 크게 나타났으며, 굵은골재는 골재간결합력(Interlocking) 및 시멘트 페이스트와의 부착력(Bond) 증진에 기원하며 자철광에서 17~22%크게 나타났다.