• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.105-113
• /
• 2016

OBJECTIVES : This study is to develop the optimum mixing proportions for cement concrete pavement with using recycled aggregates. METHODS : The mixture varied recycled coarse aggregates content from 50 % to 100 % to replace the natural coarse aggregates by weight. Tests for fundamental properties as a cement concrete pavement were conducted before and after hardening of the concrete. RESULTS : It was found that the variation in the amount of the recycled aggregate affected the compressive and flexural strength development, as well as the chloride ion penetration resistance. As the amount of the recycled aggregate content increased the compressive and flexural strength and the resistance to chloride ion penetration decreased. However, the resistance to freeze-thaw reaction was affected significantly. In addition, the gradation of the aggregate became worse and hence so did the coarseness factor as the recycled aggregate amount increased. CONCLUSIONS : The fundamental properties of the concrete with recycled aggregate does not seem to be appropriate when the recycled aggregate quality is not guaranteed up to a some level and its replacement ratio is over 50%. The optimized gradation of the aggregates should also be sought when the recycled aggregate is used for the cement concrete pavement materials.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.549-554
• /
• 2001

The authors have proposed that waste glass, which is crushed to pieces, can be used as a concrete aggregate. At the present time, recycled-glass concrete is used for sidewalk concrete blocks and pavement as glass is ornamental. However, in cases where recycled-glass concrete is used for structural concrete, strength and durability are required as structural concrete is exposed to the weather. Glass that is used generally is a mixture of SiO$_2$, Na$_2$O and CaO. SiO$_2$is the most likely cause of alkali-aggregate reaction when waste glass was used for concrete aggregate. In this study, an alkali-aggregate reaction test that is one of the important tests related to durability of aggregate was carried out far discussion of utilization of waste glass for concrete aggregate. From the results of the tests, it is found that glass is a reactive aggregate. The pessimum proportion of glass is about 75%. Then the cases of using fly ash, blast furnace slag and artificial zeolite for admixture materials were also examined for the purpose of prevention of alkali-aggregate reaction. from the results of the test, it was found that using them is an effective way to prevent alkali-aggregate reaction. The compressive strength in the cases of using admixture materials is larger than that without admixture materials.

• International Journal of Concrete Structures and Materials
• /
• 제8권4호
• /
• pp.309-313
• /
• 2014

The volume fraction of the coarse aggregate in the conventional plastic concrete is controlled relatively low to ensure a required workability. In this paper, a new type of coarse aggregate interlocking concrete with strength ranging from C30 to C80 was prepared with scattering-filling aggregate process. The strength of concrete prepared with this method increases obviously whereas the shrinkage decreases significantly, the cement dosage in the concrete decreased 20 % at the same time. The microhardness of the ITZ between the cement paste and scattering-filling aggregate is higher than that of the original aggregate, the ITZ become narrower and tighter also. The interlocking and more even distribution of the coarse aggregate and the water absorption of the addition of extra amount of coarse aggregates contribute to the strength and performance improvement of the concrete prepared with scattering-filling aggregate process.

• 한국건설순환자원학회논문집
• /
• 제5권1호
• /
• pp.125-130
• /
• 2010

최근 천연골재의 부족현상과 더불어 도심지의 재개발 재건축 사업 등이 진행됨에 따라 발생하는 막대한량의 폐콘크리트는 현재 당면하고 있는 심각한 문제라 할 수 있다. 따라서 본 연구에서는 원콘크리트의 배합조건 및 골재특성이 콘크리트의 유동 및 강도특성에 미치는 영향을 평가할 목적으로 동일 배합조건의 공시체를 제작하여 6개월간 폭로시킨 후, 파쇄하여 순환 골재로 사용함으로서 원콘크리트에 적용된 콘크리트의 특성이 순환골재의 기초특성에 미치는 영향을 평가하고, 아울러 천연골재와의 혼합비율에 따른 품질개선 효과 등에 대하여 검토하였다. 검토결과, 순환골재를 단독으로 사용하는 방안보다는 양질의 천연골재와 함께 적정비율 혼합하고, 여기에 물-결합재비가 다소 큰 일반강도 범위의 콘크리트에 대상으로 활용하는 것이 유효하다는 결론을 얻었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.186-191
• /
• 1996

The recycled aggregate obtained from the recycled concrete may be used in road construction as crushed aggregate. The properties of recycled aggregate are reached to the values in accordance with specification for the subbase layer of the road construction. However, for the base layer of road construction, the mixtures of recycled aggregate and crushed aggregate have to be used in order to satisfy the specification. In the Batch Leaching Test the recycled aggregate has lower content of heavy matal and organic matter than those written in environmental pollution law. So it does not occur the environmental pollution.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.65-68
• /
• 1997

In this study, we investigate the difference between natural aggregate and electric arc furnace (EAF) slag one in order to use EAF slag aggregate as coarse aggregate in concrete. We find the physical and chemical properties of EAF slag aggregate according to the different aging processes. We consider the properties of the concrete made with EAF slag aggregate on these bases.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.332-333
• /
• 2018

The master plan for aggregate supply and demand aims to ensure the feasibility viability of mid/long-term aggregate supply and demand by establishing comprehensive plans for regional groups and aggregate types. In addition, It will propose ways to reduce the environmental impact of the development of aggregates and to stabilize aggregate supply and demand across the country. Also, it will seek to promote the stable development of the construction industry through policy and related amendments.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.132-133
• /
• 2015

In this research by examining the influence that low quality aggregate has on the strength of concrete through testing, the lowering of strength according to use of low quality coarse aggregate was reviewed. The results showed that when using low quality coarse aggregate, due to the quality of aggregate a high volume of units was required, and this caused the compression strength to be lowered. In conclusion it was confirmed that if the low quality aggregate was used as is without mix correction this would lead to faulty construction and if the aggregate was corrected to about 60 kg/m3 mix correction, this would lead to an economically infeasible concrete mix.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.99-100
• /
• 2012

Aggregate thermal properties and cooling methods are most important to evaluate the residual mechanical properties of concrete. In this study, we evaluate the residual mechanical properties of concrete according to the aggregate type and cooling method. We use the normal weight aggregate and light weight aggregate which have different thermal properties. After heating to the target temperature, we evaluate the mechanical properties according to the slow and fast cooling condition. As a result, normal weight aggregate concrete has higher effectiveness of cooling conditions than light weight aggregate concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.111-117
• /
• 1995

The alkali-aggregate reaction is a reaction between the alkali metals in the pore water of a concrete and an unstable mineral of the aggregate. There are three types of alkali-aggregate reation which causes deterioration of concrete, such as alkali-silicate reation, alkali-carbonate reaction and alkali-silica reation. Deterioration due to alkali-silica reation is more comon than that due to either the alkali-silicate or alkali-carbonate reaction. The alkali-silica reation is a reaction between the hydroxyl ions in the pore water of a concrete and silica which exists in signigicant quantities in the aggregate. In this PAPER, Alkali-aggregate reactions of mortar made with various abroad aggregate were investigated using XRD, microscope, chemical and physical tests. In additions, the effects of the texture of aggregate, Na, K, CI ion concentrations added to the mortar, on these reactions were studied.