• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.47-54
• /
• 1998

An experimental study was performed to discover the effect of environmental conditions on the rolling resistance behavior of pure silver and lead coated 52100 bearing steel. Pure silver and lead coating were produced by a thermal evaporation coating method. Experiments using a thrust ball bearing-typed rolling test-rig were performed under vacuum, dry air and controlled humidity conditions. Results showed that agglomeration of particles were prevented in vacuum environment and as it showed low and stable rolling resistance by shakedown phenomena. Also, humidity relates closely to the agglomeration of particles and increased the rolling resistance after the failure of coated layer.

• The Korean Journal of Ceramics
• /
• v.6 no.1
• /
• pp.58-63
• /
• 2000

The preparation of Y-doped $SrZrO_3$powder by ultrasonic spray pyrolysis was investigated as a representative system, in order to produce fine, single phase multicomponent oxide powders. A precursor solution containing metal nitrates, citric acid and ethylene glycol was atomized glycol was atomized with an ultrasonic spray nozzle. Gel particles formed by organic functional groups were pyrolyzed and subsequently calcined at $800^{\circ}C$ to obtain well-crystallized, single perovskite phase. Most of large particles exhibited macroscopic pores and weak agglomeration between primary particles. However, strong agglomeration was observed in the surfaces of large particles. The effect of the microstructures of these particles on size reduction to submicron particles was described.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.2
• /
• pp.24-32
• /
• 2004

Toner used in xerographic printing process is hydrophobic powder with low surface energy. The toner ink film fused on paper surface can be efficiently detached from a fiber surface during pulping, but it does not fragment again into fine toner particles. Ink agglomerates that result have too large particle size to be deinked by flotation. The purpose of this study is to enhance toner agglomeration using 1-octadecanol for improving the toner removal by screening. The effect of pH, pulping temperature, and 1-octadecanol on toner agglomeration and removal by screening was investigated using image analysis methods. Results showed that the size of toner agglomerates increased substantially when pulping was carried out at high temperature under acidic condition. When toner agglomerates showed spherical shape, the particle removal efficiency of screening was improved.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.38-38
• /
• 1997

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.117-121
• /
• 2003

Nickel(Ni) powders were prepared from the mixture of nickel chloride and magnesium stearate by a hydrogen reduction process, and the effect of reaction temperature and the addition of magnesium stearate on the chracteristics of the powders were investigated. The effect of size reduction of nickel particles was observed in the presence of magnesium stearate owing to the inhibition of excess growth of paricles. The size reduction and the degree of agglomeration of the particles affected by the amounts of liqiud phase, which related to the increase of magnesium stearate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.1
• /
• pp.51-59
• /
• 1992

Effect of agglomeration of $Nb_20_5$ of the same primary particle size on formation reaction and sintering of $Pb(Mg_{1/3}\;Nb_{2/3})O_3$ was examined. Both solid state reaction and molten salt synthesis were adopted. With decreasing agglomeration of $Nb_20_5$ increased the rate of formation reaction of perovskite PMN in solid state reaction, but had little influence in molten salt synthesis. It was concluded that the increase in the inhomogeneity of the dispersion state of intermediate pyrochlore with increasing agglomeration of $Nb_20_5$ retarded the formation reaction of perovskite PMN in solid state reaction, while had little influnce in molten salt synthesis due to its solution - precipitation mechanism -mainly depends on powder surface area.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.375-389
• /
• 2021

Recent years have seen a rapid boom of the 4th industry and relevant policies in regions. However there are only a few studies about the impact of the 4th industry on the local economy. This study examines the agglomeration effects of the 4th industry on regional economy by using a spatial statistical models. As a result, it was found that the agglomeration of the 4th industry had a positive effect on the productivity of the local economy, while there is not good enough evidence to prove the relationship between the 4th industry and the income of the region. These findings indicate that the impact of the agglomeration of the fourth industry on the local economy is limited. In addition, the impact on the local economy was different by the type of the fourth industry, and the manufacturing industry and financial and insurance industries had a positive impact on the growth of the local economy.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.159-163
• /
• 1999

Model experiments were conducted to investigate the effect of different fillers on the removal of toner ink. Combinations of different papers (commercial photocopy paper and filler-free paper), fillers (calcium carbonate, kaolin clay, and talc), and chemicals(1-octadecanol, stearic acid, oleic acid, and TOFA) and stearic acid were found to be effective in detachment and agglomeration of toner ink. Furthermore, pH had little effect on toner detachment and agglomeration, indicating both protonated fatty acids and their anions are equally effective. In the presence of either kaolin clay or talc, all these agglomerating agents are equally effective, although a slightly higher dosage(1% for clay and 2% for talc as compared with control) is required, presumably due to the adsorption of chemical by the filler. Calcium carbonate filler, on the other hand, has a significant and adverse effect on the fatty acids used but has little effect on 1-octadecanol with the exception of possible adsorption. While stearic acid is not effective, a much higher level of oleic acid or TOFA is needed when calcium carbonate fillers are present as compared to the filler-free case. Fatty acids react with calcium carbonate to form calcium salts. The availability of fatty acid anion for toner detachment and agglomeration is determined by the solubility of calcium salt of a given fatty acid. Calcium oleate is 10 times more soluble in water than calcium stearate.

• Journal of the Korean Ceramic Society
• /
• v.32 no.10
• /
• pp.1123-1130
• /
• 1995

In the preparation of manganese zinc ferrite powders by alcoholic dehydration of citrate/formate solution. The effect of pH change on precipitation was investigated. The pH range for obtaining stable precipitates was studied. The glassy phase was obtained when the pH value of solution is higher than 5, and the formation mechanism of glassy phase was suggested. Below pH 5, the stable precipitates were formed, and the optimal pH was 2. Formation of glassy phase was accounted for the change of surface charge by pH change. The change of surface charge is caused by the interparticular agglomeration. The precipitate was redissolved into the water on the surface of precipitate itself and through the polymerization, it agglomerated. This mechanism is tought to be similar to that of viscous flow.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.2
• /
• pp.33-38
• /
• 2004

Toner particles used in laser and xerographic printing process is fused on paper surface so strongly that they tend not to detach easily from the recylced paper surface during pulping. Furthermore, the removal efficiency of detached toner particles by conventional screening and flotation process has limitation due to the platy shape and large size of detached toner particles. It has been shown that the removal efficiency of toners in the screening process can be increased by agglomerating the toner particles with fatty alcohol. It is not possible, however, to remove small and platy toner particles by screening process. These small and platy toner particles should be removed by flotation process. In this study the effect of fatty alcohol that used for toner agglomeration on flotation efficiency has been examined. It was shown that flotation efficiency decreased when fatty alcohol was used most probably due to its effect of reducing hydrophobicity of toner particles.