• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1704-1709
• /
• 2016

In this paper, we propose efficient uplink data transmission method in ultra dense wireless networks as in intra-aircraft, where large-scale APs and wireless sensors are deployed. In the ultra dense wireless networks, a performance degradation is inevitable due to the inter-AP interference. However, the performance degradation can be avoided if a scheduling algorithm can estimate the amount of interference caused by each wireless sensor and reflects it. SGIR (Signal-to-Generating Interference Ratio) based scheduling algorithms is a typical example. Unfortunately, the scheduling algorithms based on the interference caused by wireless sensors necessarily yield large scale exchange of information through backhaul which connects APs. Therefore, we, in this paper, propose a novel scheme which can dramatically reduce the amount of information which are exchanged through backhaul connection. Monte-Carlo simulation results show that the proposed scheme can reduce the amount of backhaul traffic by 27% without loss of data transmission rate.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.31-40
• /
• 2017

Absolute nodal coordinate formulation was developed in the mid-1990s, and is used in the flexible dynamic analysis. In the process of deriving the equation of motion, if the order of polynomial referring to the displacement field increases, then the degrees of freedom increase, as well as the analysis time increases. Therefore, in this study, the primary objective was to reduce the analysis time by transforming the dimensional equation of motion to a non-dimensional equation of motion. After the shape function was rearranged to be non-dimensional and the nodal coordinate was rearranged to be in length dimension, the non-dimensional mass matrix, stiffness matrix, and conservative force was derived from the non-dimensional variables. The verification and efficiency of this non-dimensional equation of motion was performed using two examples; cantilever beam which has the exact solution about static deflection and flexible pendulum.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.918-929
• /
• 1999

동기식 스트림 암호통신 방식을 사용하는 암호통신에서는 암/복호화 과정 수행시 암호통신 과정에서 발생하는 사이클슬립으로 인해 키수열의 동기이탈 현상이 발생되고 이로 인해 오복호된 데이타를 얻게된다. 이러한 위험성을 감소하기 위한 방안으로 현재까지 암호문에 동기신호와 세션키를 주기적으로 삽입하여 동기를 이루는 주기적인 동기암호 통신방식을 사용하여 왔다. 본 논문에서는 CDMA(Cellular Division Multiple Access) 이동망에서 데이타서비스를 제공할 때 사용되는 점대점 프로토콜의 주소영역의 특성을 이용하여 단위 측정시간 동안 측정된 주소비트 정보와 플래그 패턴의 수신률을 이용하여 문턱 값보다 작은경우 동기신호와 세션키를 전송하는 비주기적인 동기방식을 사용하므로써 종래의 주기적인 동기방식으로 인한 전송효율성 저하와 주기적인 상이한 세션키 발생 및 다음 주기까지의 동기이탈 상태의 지속으로 인한 오류확산 등의 단점을 해결하였다. 제안된 알고리즘을 링크계층의 점대점 프로토콜(Point to Point Protocol)을 사용하는 CDMA 이동망에서 동기식 스트림 암호 통신방식에 적용시 동기이탈율 10-7의 환경에서 주기가 1sec인 주기적인 동기방식에서 요구되는 6.45x107비트에 비해 3.84x105비트가 소요됨으로써 전송율측면에서의 성능향상과 오복호율과 오복호 데이타 비트측면에서 성능향상을 얻었다. Abstract In the cipher system using the synchronous stream cipher system, encryption / decryption cause the synchronization loss (of key arrangement) by cycle slip, then it makes incorrect decrypted data. To lessen the risk, we have used a periodic synchronous cipher system which achieve synchronization at fixed timesteps by inserting synchronization signal and session key. In this paper, we solved the problem(fault) like the transfer efficiency drops by a periodic synchronous method, the periodic generations of different session key, and the incorrectness increases by continuing synchronization loss in next time step. They are achieved by the transfer of a non-periodic synchronous signal which carries synchronous signal and session key when it is less than the threshold value, analyzing the address field of point-to-point protocol, using the receiving rate of address bits information and flag patterns in the decision duration, in providing data services by CDMA mobile network. When the proposed algorithm is applied to the synchronous stream cipher system using point-to-point protocol, which is used data link level in CDMA mobile network, it has advanced the result in Rerror and Derror and in transmission rate, by the use of 3.84$\times$105bits, not 6.45$\times$107bits required in periodic synchronous method, having lsec time step, in slip rate 10-7.

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.239-245
• /
• 1995

Mn-Zn ferrite thin films were deposited on $SiO_2(1000 \AA)/Si(100)$ by ion beam sputtering using a single ion source. A mosaic target consisting of a single crystal(ll0) Mn-Zn ferrite with a Fe metal strip on it was used. As-deposited films without oxygen gas flow have a wiistite structure due to oxygen deficiencies, which originated from the extra metal atoms sputtered from the metal strips during deposition. The as-deposited films with oxygen gas flow, however, have a spinel structure with (111) preferred orientation. The crystallization of thin films was maximized at the ion beam extraction voltage of 2.lkV, at which the deposited films are bombarded appropriately by the energetic secondary ions reflected from the target. As the extraction voltage increased or decreased from the optimum value, the crystallinity of thin films becomes poor owing to a weak and severe bombardment of the secondary ions, respectively. Crystallization due to the bombardment of the secondary ions was also maximized at the beam incidence angle of $55^{\circ}$. The as-deposited ferrite thin films with a spinel structure showed ferrimagnetism and had an in-plane magnetization easy axis.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.89-101
• /
• 2015

This paper proposes a statistical model of 3-D positions when tracking moving targets using the uncooled infrared (IR) stereo camera system. The proposed model is derived from two errors. One is the position error which is caused by the sampling pixels in the digital image. The other is the timing jitter which results from the irregular capture-timing in the infrared cameras. The capture-timing in the IR camera is measured using the jitter meter designed in this paper, and the observed jitters are statistically modeled as Gaussian distribution. This paper derives an integrated probability distribution by combining jitter error with pixel position error. The combined error is modeled as the convolution of two error distributions. To verify the proposed statistical position error model, this paper has some experiments in tracking moving objects with IR stereo camera. The 3-D positions of object are accurately measured by the trajectory scanner, and 3-D positions are also estimated by stereo matching from IR stereo camera system. According to the experiments, the positions of moving object are estimated within the statistically reliable range which is derived by convolution of two probability models of pixel position error and timing jitter respectively. It is expected that the proposed statistical model can be applied to estimate the uncertain 3-D positions of moving objects in the diverse fields.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.706-715
• /
• 2012

Electro-optical sigma-delta modulators are the core module of digital receiver to digitize wideband radio-frequency signals directly at an antenna. Electro-optical sigma-delta modulators use a pulsed laser to oversample an input radio-frequency signals at two Mach-Zehnder Interferometer(MZI) and shape the quantization noise using a fiber-lattice accumulator. Decimation filtering is applied to the quantizer output to construct the input signal with high resolution. The jitter affects greatly on reconstructing the original input signal of modulator. This paper analyzes the performance of first order single bit electro-optical sigma-delta modulator in the time domain and the frequency domain. The performance of modulator is analyzed by using asynchronous spectral averaging of the reconstructed signal's spectrum in the frequency domain. The reference value of time jitter is presented by analyzing the performance of jitter effects. This kind of jitter value can be used as a reference value on the design of modulators.

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.391-400
• /
• 2017

The purpose of this paper is to present the effect of image stimulation on body stability as a conceptual model and to investigate the effect of image stimulus(2D, VR) on body stability(hand stability) through experiments Recently, stereoscopic images such as virtual and augmented reality are combined with smart phones and exercise equipments, and the diffusion is becoming active. The possibility of a safety accident or human error is also increasing as it temporarily affects the balance of the body and hand stability after the image stimulus is removed. The conceptual model is presented based on the results of previous studies. Based on the experimental results, the conceptual model has been explained in combination with the human information processing process and cognitive resource models that take place in the brain. Twenty subjects were exposed to 2D and VR stimuli, and display fatigue was measured by cybersickness questionnaire and hand stability by hand steadiness tester. Experimental results show that VR images induce higher display fatigue and lower hand stability than 2D. In this study, it is meaningful that hand stability according to image type and display fatigue level which have not been tried yet is revealed through conceptual model and experiment.

• 대한공업교육학회지
• /
• v.36 no.1
• /
• pp.115-130
• /
• 2011

When the hollow cylinder structure moves in underwater with high speed structural can be propagated from the end of the structure to the front side. This noise can reduce the sensitivity of the conformal array which installed in the surface of the cylinder. To reduce this noise propagation it is suggested to install two self-reduction rings at the surrounding of the cylinder which is 500mm in diameter and 840mm in length. The places of the two noise reduction rings are 120mm and 240mm point from the end of the structure. Two noise reduction rings reduced 10.1 % of maximum stress. When outside noise frequency applied to the structure from the 4kZ to 6kHz, 20dB noise reduction was calculated using 6 order polynomial equation. When outside noise frequency also applied to the structure with 200Hz, 500Hz, 900Hz, maximum sound pressure level point moved to the end of the structure. Most conformal sensors are fabricated at the front side of the structure. Based on the simulation results proposed two rings can be reduced noise propagation from the tail of the structure effectively.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.259-267
• /
• 1994

The effect of processing parameters, temperature, gas concentration, gas flow rate and pressure, were studied on the densification of carbon/carbon composites using a Robust design method in isothermal low-pressure chemical vapor infiltration with a gas system of $C_3H_8-N_2$ After one time of isothermal low-pressure chemical vapor infiltrat.ion, the bulk density of carbon/carbon composites in creased up to 1-9% and apparent porosity of the composites decreased down to 20-50%. ANOVA analysis of the experiment.al data revealed that the important parameters of isothermal lowpressure chemical vapor infiltration were temperature, gas concentration and gas flnw rate. 'There was almost no ~ f f e c t on densification by pressure and interaction between each parameters. In t, he present experimental conditions, the highest bulk density was obtained at $1100^{\circ}C$ temperature, 100% $C_3H_8$, concentration, 100 SCCM flow rate and 5 torr pressure.

• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.148-155
• /
• 2013

The crosslinking density of polymer can be quantitatively calculated by the Flory-Rehner equation using the swelling experimental data and the lattice constant ${\beta}_1$ of interaction parameter (${\chi}$) in this equation should be chosen have used cautiously. This ${\beta}_1$ is the experimental data by rule of thumb, and researchers have used little different values respectively. Generally, the average molecular weight between crosslink points $M_c$ in the Flory-Rehner equation and the Mooney-Rivlin equation have the same value, and ${\beta}_1$ can be calculated when the $M_c$ in the Flory-Rehner equation is given. Therefore, in this research, firstly we calculated the $M_c$ using the selected ${\beta}_1$ (=0.34) and the swelling experimental data of 1,2,3-triazole polymer from the Flory-Rehner equation, secondly the $M_c$ from the Mooney-Rivlin equation is calculated by the tensile experimental data, and finally two $M_c$ were compared. As a result, two $M_c$ values were almost the same, and it was proved that the ${\beta}_1$ (=0.34) was selected properly.