• 한국군사과학기술학회지
• /
• 제19권3호
• /
• pp.281-287
• /
• 2016

The purpose of this study is to analyze the vibration characteristics and develop a mounting which can improve the strength safety factor to replace the high failure rate APU(auxiliary power unit) imported metal mounts with rubber mount that can be domestically produced. For this study, we analyzed in 3 kinds of rubber mounts hardness for the natural frequency to avoid the average excited frequency of the APU. In addition, allowed vibration acceleration of rubber mount confirmed to 90.8 g by adding a strength safety factor. To assure the validity of the design, we measure the vibration acceleration equipped with a metal mount and rubber mount 2 species(Hs 50 and 60). As a result, the proposed design method in this study is reasonable because the rubber mounts is excellent strength safety factor and vibration transmissibility than metal mounts.

• 한국항공우주학회지
• /
• 제47권1호
• /
• pp.35-40
• /
• 2019

본 연구의 목적은 항공기 구조개발에 널리 적용되고 있는 탄소섬유 복합재의 피로특성을 확인하고, 실기체 피로시험에 활용되고 있는 자료를 획득하는 것이다. 복합재 구조의 내구성 및 손상허용성의 평가는 주로 피로시험을 통하여 이루어지며, 실기체 피로시험에 적용되고 있는 파라미터에는 피로수명계수와 하중증대계수가 있다. 탄소섬유/에폭시 일방향 및 직물형 복합재로 시편을 제작하였으며, 응력비와 적층패턴을 달리하여 피로시험을 수행하였다. Sendeckyj 모델을 적용한 와이블 분포와 개별적인 피로수명에 대한 와이블 분포를 이용하여 형상 파라미터를 분석하였다. 또한 신뢰도를 고려한 피로수명계수와 하중증대계수를 평가하였다.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.58-62
• /
• 2017

In this paper, we studied the structural design for safety improvement of the winch mount of the armored recovery vehicle. From the finite element analysis using the safety factor of the original winch mount, the results determined that the safety factor was very low, namely 1.14 at $-15^{\circ}$ when towing the maximum force. For considering the usage and safety, the safety factor needs to increase to between 1.4 and 1.6. To improve the safety factor, a re-design, such as shape modification and strengthening the welded zone, was performed. After the improvement of the structural design, the safety factor of the improved mount was calculated at 1.78, an increase of about 56.1% from that of the original mount.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권4호
• /
• pp.12-22
• /
• 2014

This study evaluated the pattern of groundwater fluctuation in cyrstalline rock using time series and factor analyses. From the results, groundwater level for the 18 wells was classified into 4 types reflecting the hydrogeological properties and rainfall event. Type 1 (DB1-5, DB1-6, DB2-2, KB-10, KB-13) was significantly influenced by groundwater flow through water-conducting features, whereas type 2 (DB1-3, DB1-7, KB-1~KB-3, KB-7, KB-11, KB-14, KB-15) was affected by minor fracture network as well as rainfall event. Type 3 (DB1-1, DB1-2) was mainly influenced by surface infiltration of rainfall event. Type 4 (DB1-8, KB-9) was reflected by the irregular variation of groundwater level caused by anisotropy and heterogeneity of crystalline rock.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.166-166
• /
• 2003

• 대한간호학회지
• /
• 제19권3호
• /
• pp.273-284
• /
• 1989

The aim of this investigation was to delineate concepts contributing to the Exercise of Self-Care Agency (E.S.C.A.) Scale developed by Kearney & Fleischer (1979) and to test its construct validity and its predictors. The results are summarized as follows ; 1. By means of principal factor analysis and maximal likelihood factor analysis upon data generated from 280 undergraduate students, the factors of Concern about Health Knowledge, self-Concept, Information - Seeking Behavior, Decision -making and Responsibility, Self-esteem, and Passivity emerged. The total percent of variance explained by the 6 factors was 75.1% 2. To assess factor independence and instrument homogeneity, correlations among the 6 factors were computed. The correlations ranged from .24 to .46 indicating that the factors and the items were not too similar or redundant. 3. Test-retest reliability of the total scale is r＝.70. Cronbach's $\alpha$ coefficient for internal consistency of the total scale is .86 and that of the factors ranged from .750 to .661 (only factor 6 .497). 4. In additional analysis of the Exercise of Self-Care Agency Scale in relationship to Multiple Health Locus of Control, Family Environmental Scale, and Cornell Medical Index using stepwise multiple regression, the Internal Health Locus of Control Score predicted 21.8%(F＝53.34, p＝.0001), Family Environmental Score 8.3%(F＝22.59, P＝.0001), Modified Cornell Medical Index Score 5.4%(F＝15.74, P＝.0001) of the score of the E.S.C.A.

• 대한산업공학회지
• /
• 제36권2호
• /
• pp.108-116
• /
• 2010

The maintenance of a deteriorating system is often imperfect. Previous studies have shown that the imperfect preventive maintenance (PM) can reduce the wear out and aging effects of deteriorating systems to a certain level between the conditions of as good as new and as bad as old. In this paper, we employ the concept of the improvement factor in investigating two optimal PM policies; failure limit policy and periodic PM policy. We redefine the improvement factor model as a function of the cost of PM, using this concept, we derive the conditions of optimal PM policies and formulate expressions to compute the expected cost rate. Based on this information, the determination of the maintenance policies which minimize the cost rate is examined. Numerical examples for the Weibull distribution case are also given.

• 한국항공우주학회지
• /
• 제47권6호
• /
• pp.438-445
• /
• 2019

본 논문에서는 MEMS 자이로스코프에서 발생하는 G-민감도 오차를 관성센서 오차 모델에 정의하고, 이를 분석하여 오차 성분을 추출하는 기법을 제안한다. 일반적으로 MEMS기반 자이로스코프는 스프링과 관성질량체를 갖는 진동형 방식으로 개발된다. 따라서 구조적으로 고기동 환경에서 인가되는 가속도에 비례하는 G-민감도 오차 특성을 갖게 된다. 이러한 G-민감도 오차는 외부에서 높은 가속도가 인가되지 않는 민수분야에서는 무시할 정도로 작다. 하지만 전술급 성능의 MEMS 관성측정기가 고가속 환경에서 외란과 가속도에 의해 G-민감도 오차가 발생하게 되면 항체의 유도조종을 위한 항법장치 성능에 큰 영향을 미치게 되므로 오차 분석과 보상은 필수적이다. 따라서 본 논문에서는 MEMS 자이로스코프에 발생하는 G-민감도 오차를 분석하고 정의하여 관성센서 오차모델에 적용한다. 새로 정의된 관성센서 오차모델을 분석하여, 오차 성분을 고가속도 시험환경이 아닌 FMS 시험만으로 정확히 추출하는 방법을 제안한다. 그리고 제안한 방법으로 얻은 오차를 보상하여 고가속도 시험을 수행하고 그 결과를 분석하여 성능과 신뢰성을 검증한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권1호
• /
• pp.102-111
• /
• 2014

An analytical model was developed to understand the physics and predict the functional performance of a pin puller. The formulated model is based on one-dimensional gas dynamics for an ideal gas. Resistive forces against pin shaft movement were measured in quasi-static mechanical tests, the results of which were incorporated into the model. The expansion chamber pressure and the pin shaft displacement were measured from an actual firing test and compared to the model prediction. The gas generation rate was adjusted by a correction factor, and the heat transfer rate was obtained through parametric analysis. The validity of the model is assessed for additional firing tests with different amounts of pyrotechnic charge. This model can provide knowledge on how the pin puller functions, and on which design parameters contribute the most to the actuation of the pin puller. Using this model, we estimate the functional safety factor by comparing the energy generated by the pyrotechnic charge to the energy required to accomplish the function.

• 한국동물위생학회지
• /
• 제45권1호
• /
• pp.39-45
• /
• 2022

The total bacteria count is significantly important factor for hygienic quality in raw milk. BactoScan FM^TM and BactoCount IBC^TM are the automated instruments for the determination of the total bacterial count in raw milk. They have been used after calibration by standard plate count (SPC) method in South Korea since 2000. It is necessary to re-evaluate for total bacterial counter according to the improvement of milk quality and the change of milk quality grade. Therefore, this study was evaluated the conversion mode of the two machines by SPC method. We collected 921 bulk-tank milk samples throughout the concentration range of 1,000~1,000,000 CFU/mL from June 2020 to October 2021. As a result, when compared by the SPC value, there was a slight difference in total bacterial count in BactoScan below 10,000 CFU/mL and above 200,000 CFU/mL and in BactoCount above 100,000 CFU/mL, respectively. Therefore, the conversion factor for BactoScan and the conversion equation for BactoCount were newly adjusted based on SPC value, and then the correlation coefficients (R²) was 0.85 or higher. In addition, the correlation (R²) between BactoScan and BactoCount was 0.91, which means the results were high positive correlation. These results are expected to contribute to improving the accuracy of the automated instruments for determining of total bacterial count in raw milk.