• 열처리공학회지
• /
• 제8권1호
• /
• pp.65-74
• /
• 1995

This research was performed to investigate the effect of ageing on grain refinement of 82wt%Cu-13.5wt%Al-4.5wt%Ni-0.1wt% misch metal alloy with ageing temperature and time. The results obtained in this study are as follows; The variation of transformation temperature with ageing temperature had very influence on ageing time at $300^{\circ}C$. But it had not influence on ageing time at $100^{\circ}C$. The variation of transformation temperature after second reversed transformation cycle was not occured in martensitic phase ageing, but $M_s$ point was appeared equally with third reversed transformation cycle in parent phase ageing. The variation of $M_s$ point was not nearly with ageing time at $100^{\circ}C$ ageing temperature. But it was decreasing with ageing time at $300^{\circ}C$ ageing temperature and $A_s$ point was increasing with ageing time. Structure of parent phase ageing was being M18R martensitic and N2H martensitic phase. It was found that ${\alpha}$ and ${\gamma}_2$ phase were created by ageing of long time at $300^{\circ}C$ ageing temperature.

• Nuclear Engineering and Technology
• /
• 제9권3호
• /
• pp.117-123
• /
• 1977

소입된 질칼로이-4의 가공시효(strain ageing) 현상에 미치는 시효시간 및 온도의 효과를 523-588 狂 온도 구간에서 1~52초의 짧은 시효기간에 조사하였다. 이 실험 조건하에서, 가공시효응력은 5.55$\times$$10^{-4}$ sec$^{-1}$ 신연속도(strain rate) 경우 시효시간 및 시효온도가 증가할수록 증가하였다. 소입된 질칼로이-4의 응력부하 하의 가공시효 현상이 두 한계로 나타나는 것이 확인되었는데 첫단계는 0.39ev의 활성화 에너지 값의 구간으로 이는 전위 (dislocation) 주위의 응력상태로 인한 침입형 산소원자들의 Snoek타입의 배열 (ordering)로 인한 것으로 고려되었으며 두번째 단계는 0.6ev 활성화에너지 값을 갖는 구간으로 이는 주로 산소원자들의 장범위확산에 기인하는 것으로 해석되었다.

• 전기의세계
• /
• 제22권2호
• /
• pp.23-27
• /
• 1973

An initial starting voltage, ignition time, glow current and blink of the flow starter are changed rapidly in initial using. therefore an ageing is required to stabilize the initial characteristics. According to the experiments, it is proved that the ageing time for the starting voltage and glow current takes 3 minutes and 5 minutes for ignition time and blink.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1664-1666
• /
• 1999

In order to study the mechanical properties of high nitoren steel with ageing time, hardness, tensile stress several basic properties of Fe-Mn-Cr-Ni-N steel have been studied. With increasing partial pressure of nitrogen and ageing time to 10h, hardness and tensile stress are increased, but decreased beyond 10h because of over ageing. It is considered that the main factor related with mechnical properties is carbide precipitate, $M_7C_3$ which is precipitated with ageing time in matrix and optimum ageing time is 10h in $60^{\circ}C$.

• 한국축산식품학회지
• /
• 제35권3호
• /
• pp.406-412
• /
• 2015

The combined effects of electron-beam irradiation and ageing of beef were examined. The irradiated samples at dose of 0 or 2 kGy were kept and analyzed for the microbial growth, shear values, meat color, and nucleotide-related flavor compounds at different ageing temperatures (2, 10, or 25℃) for 8 d. The irradiation effect on inactivation of foodborne pathogens was also investigated. The population of Listeria monocytogenes and E. coli O157:H7 inoculated in beef samples decreased in proportion to the irradiation dose, showing D₁₀ values of 0.66 and 0.65 kGy respectively. The irradiated beef eye of round had lower number of total aerobic bacteria (TAB) than nonirradiated one during the storage, but the TAB increased with higher ageing temperature (p<0.05). Especially, TAB increased sharply in non-irradiated samples aged at 25℃ after 4 d (p<0.05). With increasing ageing temperature and ageing time, shear force values decreased (p<0.05). The color a* values of the irradiated beef were lower than those of the non-irradiated throughout the ageing period (p<0.05). As ageing time and temperature increased, the amounts of inosine monophosphate decreased and the hypoxanthine increased (p<0.05). Relatively high ageing temperature could be used at irradiated beef eye of round to shorten the ageing time.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권6호
• /
• pp.668-675
• /
• 2013

We investigate the effect of the ageing time and etching time on the etching rate of SiGe mixed etching solution, namely 1 vp HF (6%), 2 vp $H_2O_2$ (30%) and 3 vp $CH_3COOH$ (99.8%). For this etching solution, we found that the etch rate of SiGe layer is saturated after the ageing time of 72 hours, and the selectivity of $Si_{0.8}Ge_{0.2}$ layer and Si layer is 20:1 at ageing time of 72 hours. The collapse was appeared at the etching time of 9min with etching solution of after saturation ageing time.

• KSBB Journal
• /
• 제26권3호
• /
• pp.183-188
• /
• 2011

Adult stem cells, which have characteristic of self-renewal and multipotency, are specialized cell types, responsible for the tissue regeneration of the damaged tissue. Recent studies suggest that stem cells senescence (or stem cells' ageing) is closely associated with the variety of ageing-related phenotypes such as tissue atrophy, degenerative diseases and onset of cancers. During ageing, declining of stem cells function and subsequently occurring mal-differentiation of stem cells would be important to understand the biological process of development of ageing-related phenotypes such as tissue degenerations and cancers. This review focuses on the DNA damage stress as a cause of senescence of stem cells and their mal differentiation, which is closely link to defect of regeneration potentials and neoplastic transformation. Understanding of molecular mechanisms governingsuch events is likely to have important implications for developing novel avenues for balancing tissue homeostasis longer period of time, further leading to 'Healthy ageing'.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.285-288
• /
• 2001

• Human Ecology Research
• /
• 제53권3호
• /
• pp.309-318
• /
• 2015

This study investigates to investigate the ageing effect on household demand for clothing, food, housing and medical care commodities in Korea using a demand system model. The cross-sectional and time-series data from Statistics Korea on urban household expenditures and age projection analyzed household demands of consumption commodities. The household head age and elderly population ratio were employed for proxy variables of ageing. Ageing variable elasticities of commodity demands were estimated. Study results show that ageing variables significantly influenced on a household demand for commodities; clothing and food consumption decreases; however, housing and medical care consumption increases with ageing. The elasticities of total consumption expenditures and price variables were estimated in the demand analysis; these two variables significantly impacted almost all of the household consumption for the studied commodities. This study provides an opportunity to examine how ageing influences household consumption for clothing, food, housing and medical care commodities as Korean society experiences a rapid ageing. It is also meaningful that this study conducted a quantitative measuring of the household demands for commodities that was different from past research on the household consumption expenditures for commodities.

• 한국심리학회지 : 문화 및 사회문제
• /
• 제12권5호_spc
• /
• pp.29-43
• /
• 2006

With longevity (75 years plus and still increasing) now commonly achievable, the new challenge for individuals and society is less concerned with adding more years to life, though that remains important, and more with adding life to years. To explore the quality of long life more fully, a concept broader than healthy ageing or active ageing is needed. For this purpose, the present article describes a framework of Positive Ageing, also known as Successful Ageing, which views the quality of long life as comprising good health, physical and cognitive functional independence, and meaningful engagement with life. Narrowly defined, it refers to old people ageing well in all these aspects. More broadly defined, it refers to ageing well from midlife on. The framework also identifiesvariables that may affect the process of ageing positively. These variables include the social-cognitive styles of control, humour and future-time perspective on the one hand, and on the other hand, resources based on finance, social network and lifestyle.