• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.149-158
• /
• 1998

The aim of this paper is to propose the technique of the two dimensional geodetic coordinates conversion between WGS84 and Bessel spheroids by the two-dimensional affine transformation modeling based on the UTM plane coordinates without the local geoid model which is essential to three dimensional coordinates conversion. Area of approximately $25\times{11}$ square km in the city of Inchon was selected as the test area. The transformation parameters were determined using the eleven triangulation control points in test area. And then, those paraneters were applied to the fifteen cadastral control points which selected as checking points for precision checking of transformation parameters. The average and standard deviations of the absolute values of the conversion residuals of checking points in latitude/longitude and N/E(UTM) and/or x/y(TM) are $\pm0.006"$$\pm0.013"$ and $\pm{17cm/}\pm{30cm}$ respectively. Also, coefficients for 7-parameters, 3-parameters and UTM model transformation computed according as sizes of transformed area, and then the transformed characteristics of checking points according to transformation methods analyzed synthetically.hetically.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.1
• /
• pp.20-25
• /
• 2011

In subband structure, the fullband AP adaptive filter with P projection dimension can be decomposed P adaptive sub-filters by applying maximally polyphase decomposition and noble identity. Each adaptive sub-filter has a simple weight update formula with the unit projection dimension. This subband decomposition method is one of the most practical solution in the viewpoint of implementation. For utilization in many applications, it is necessary that analysis for the optimum step size of the maximally polyphase decomposed subband AP(MPDSAP) adaptive filter. In this paper, we present an improved analysis model of mean square error and induce the initial optimum step size for the MPDSAP adaptive filter. Computer simulations show that there is a relatively good match between theory and practice for the improved analysis model of MSE and the induced initial optimum step size.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.182-185
• /
• 2005

Satellite cameras are calibrated before launch in detail and in general, but it cannot be guaranteed that the geometry is not changing during launch and caused by thermal influence of the sun in the orbit. Modem satellite imaging systems are based on CCD-line sensors. Because of the required high sampling rate the length of used CCD-lines is limited. For reaching a sufficient swath width, some CCD-lines are combined to a longer virtual CCD-line. The images generated by the individual CCD-lines do overlap slightly and so they can be shifted in x- and y-direction in relation to a chosen reference image just based on tie points. For the alignment and difference in scale, control points are required. The resulting virtual image has only negligible errors in areas with very large difference in height caused by the difference in the location of the projection centers. Color images can be related to the joint panchromatic scenes just based on tie points. Pan-sharpened images may show only small color shifts in very mountainous areas and for moving objects. The direct sensor orientation has to be calibrated based on control points. Discrepancies in horizontal shift can only be separated from attitude discrepancies with a good three-dimensional control point distribution. For such a calibration a program based on geometric reconstruction of the sensor orientation is required. The approximations by 3D-affine transformation or direct linear transformation (DL n cannot be used. These methods do have also disadvantages for standard sensor orientation. The image orientation by geometric reconstruction can be improved by self calibration with additional parameters for the analysis and compensation of remaining systematic effects for example caused by a not linear CCD-line. The determined sensor geometry can be used for the generation? of rational polynomial coefficients, describing the sensor geometry by relations of polynomials of the ground coordinates X, Y and Z.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.357-368
• /
• 2003

Evaluation of shape similarity for 3D models is essential in many areas - medicine, mechanical engineering, molecular biology, etc. Moreover, as 3D models are commonly used on the Web, many researches have been made on the classification and retrieval of 3D models. In this paper, we describe methods for 3D shape representation and major concepts of similarity evaluation, and analyze the key features of recent researches for shape comparison after classifying them into four categories including multi-resolution, topology, 2D image, and statistics based methods. In addition, we evaluated the performance of the reviewed methods by the selected criteria such as uniqueness, robustness, invariance, multi-resolution, efficiency, and comparison scope. Multi-resolution based methods have resulted in decreased computation time for comparison and increased preprocessing time. The methods using geometric and topological information were able to compare more various types of models and were robust to partial shape comparison. 2D image based methods incurred overheads in time and space complexity. Statistics based methods allowed for shape comparison without pose-normalization and showed robustness against affine transformations and noise.

• The Korean Journal of Applied Statistics
• /
• v.22 no.6
• /
• pp.1355-1364
• /
• 2009

This work propose a robust test for location parameters in multivariate data based on MVE and MCD with the affine equivariance and the high-breakdown properties. We consider the hypothesis testing satisfying high efficiency and high test power simultaneously to bring in the one-step reweighting procedure upon high-breakdown estimators, which generally suffer from the low efficiency and, as a result, usually used only in the exploratory analysis. Monte Carlo study shows that the suggested method retains nominal significance levels and higher testing power without regard to various population distributions than a Hotelling's $T^2$ test. In an example, a data set containing known outliers does not make an influence toward our proposal, while it renders a Hotelling's $T^2$ useless.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.667-675
• /
• 2011

In this paper, we propose an automatic image-to-image registration between high resolution multi-sensor images. To do this, TerraSAR-X image was shifted according to the initial translation differences of the x and y directions between images estimated using Mutual Information method. After that, the Canny edge operator was applied to both images to extract linear features. These features were used to design a cost function that finds matching points based on the similarities of their locations and gradient orientations. For extracting large number of evenly distributed matching points, only one point within each regular grid constructed throughout the image was extracted to the final matching point pair. The model, which combined the piecewise linear function with the global affine transformation, was applied to increase the accuracy of the geometric correction, and the proposed method showed RMSE lower than 5m in all study sites.

• Journal of Digital Contents Society
• /
• v.10 no.3
• /
• pp.423-431
• /
• 2009

There are various image retrieval methods using shape, color and texture features. One of the most active area is using shape and color information. A number of shape representations have been suggested to recognize shapes even under affine transformation. There are many kinds of method for shape recognition, the well-known method is Fourier descriptors and moment invariant. The other method is CSS(Curvature Scale Space). The maxima of curvature scale space image have already been used to represent 2-D shapes in different applications. Because preexistence CSS exists several problems, in this paper we use improved CSS method for retrieval image. There are two kinds of method, One is using RGB color information feature and the other is using HSI color information feature. In this paper we used HSI color model to represent color histogram before, then use it as comparison measure. The similarity is measured by using Euclidean distance and for reduce search time and accuracy, We use DTW for measure similarity. Compare with the result of using Euclidean distance, we can find efficiency elevated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.2
• /
• pp.28-36
• /
• 2022

As port structures are exposed to various extreme external loads such as wind (typhoons), sea waves, or collision with ships; it is important to evaluate the structural safety periodically. To monitor the port structure, especially the rubber fender, a fender segmentation system using a vision sensor and deep learning method has been proposed in this study. For fender segmentation, a new deep learning network that improves the encoder-decoder framework with the receptive field block convolution module inspired by the eccentric function of the human visual system into the DenseNet format has been proposed. In order to train the network, various fender images such as BP, V, cell, cylindrical, and tire-types have been collected, and the images are augmented by applying four augmentation methods such as elastic distortion, horizontal flip, color jitter, and affine transforms. The proposed algorithm has been trained and verified with the collected various types of fender images, and the performance results showed that the system precisely segmented in real time with high IoU rate (84%) and F1 score (90%) in comparison with the conventional segmentation model, VGG16 with U-net. The trained network has been applied to the real images taken at one port in Republic of Korea, and found that the fenders are segmented with high accuracy even with a small dataset.