• 한국의류산업학회지
• /
• 제21권1호
• /
• pp.96-103
• /
• 2019

The objective of this study is to analyze the development trends of aerogel daily clothing through market research, and to discuss the main points of future aerogel application in daily clothing. Market research on daily clothing has been conducted by collecting relevant information on the internet and analyzing the content of the information. We summarized the market research results in three aspects: the daily clothing brand using aerogel, the aerogel composite used in daily clothing, and the property of aerogel daily clothing. From these results, it can be seen that the development of aerogel daily clothing is becoming active and specialized. But there are still many difficulties due to lack of development experience. One problem is that the application methods of aerogel composite in current aerogel daily clothing are similar. Another problem is that the analysis of consumer reviews can only provides a rough understanding of the property of aerogel daily clothing. Therefore, further application research of aerogel composite in the field of daily clothing through scientific evaluation is required. It is expected to improve the performance of the aerogel daily clothing and increase the utilization of aerogel composite by conducting the further application research.

• 한국의류학회지
• /
• 제33권5호
• /
• pp.701-710
• /
• 2009

This study was conducted to develop excellent insole with good thermal insulation using new materials. We investigated that aerogel/fiber composite can be used as padding materials of shoes by comparing surface shape, moisture regain, water vapor permeability, thermal insulation and compression rate of insole materials tried with nonwoven fabric padding materials and insole sold in market. The results are as follows. Surface shapes were shown that the most appropriate material for sealing aerogel/fiber composite was high density fabric as per size of particle of aerogel. Moisture regain of aerogel/fabric composite was better than nonwoven fabric padding samples. However, when compared to insole sold in market, its moisture regain was worse than those of insole merchandises. Water vapor permeability was higher in material padded with nonwoven fabric than materials padded with aerogel/fiber composite in all three kinds of sealing fabrics. Thermal conductivity of aerogel/fabric composite was lower than nonwoven fabric material regardless of sealing fabrics. Thermal insulation of aerogel/fiber composite was higher than padding material of nonwoven fabric regardless of sealing fabrics. Compression rate of nonwoven (SP1) was higher than that of aerogel/fiber composite (SP2). Compressive elastic recovery rate of SP1 was also higher than that of SP2, which its compression rate and compressive elastic recovery rate were both poor. As the above result, ultra porous aerogel/fiber composite were proved to be material of good thermal insulation with lower thermal conductivity and also compression rate was proved to be low. Therefore, we can say that aerogel/fiber composite have high possibility to be used as insole materials for cold winter shoes requiring good thermal insulation protection.

• 마이크로전자및패키징학회지
• /
• 제26권2호
• /
• pp.23-29
• /
• 2019

Thermally expandable microsphere and aerogel composite was prepared by chemical compositization. Microsphere can produce synergies with aerogel, especially an enhancement of mechanical property. Through condensation between sulfonated microsphere and hydrolyzed silica sol, chemically-connected composite aerogel could be prepared. The presence of hydroxyl group on the sulfonated microsphere was observed, which was the prime functional group of reaction with hydrolyzed silica sol. Silica aerogel-coated microsphere was confirmed through microstructure analysis. The presence of silicon-carbon absorption band and peaks from composite aerogel was observed, which proved the chemical bonding between them. A relatively low thermal conductivity value of $0.063W/m{\cdot}K$ was obtained.

• Korean Chemical Engineering Research
• /
• 제52권3호
• /
• pp.335-339
• /
• 2014

본 연구는 실리카 에어로겔-펄프 복합체의 특성을 조사하였다. Paste 형태의 실리카 에어로겔과 펄프를 혼합하여 복합체를 제조하였으며, SEM 분석을 실시하였다. 또한 임피던스 튜브를 사용하여 흡음률을 측정하였다. 흡음계수의 피크치는 900 Hz 범위에서 얻어졌다. 실리카 에어로겔-펄프 혼합체는 우수한 흡음성능과 복합체의 표면이 소수성을 띠기 때문에 기인하는 내구성 때문에 새로운 흡음제의 가능성이 있다고 사료된다.

• 전기화학회지
• /
• 제8권2호
• /
• pp.77-81
• /
• 2005

전기화학적으로 이온을 흡착시켜 이온을 제거하는 capacitive deionization(CDI)공정용 전극으로 탄소에어로젤에 실리카젤이 첨가된 다공성 탄소에어로젤 복합전극을 사용하여 1,000ppm NaCl수용액에서 탈염 특성에 대한 충전과 방전시 시간에 따른 전류 변화, CDI효율을 조사하였다. Paste rolling법으로 제조된 $10\times10cm^2$다공성 탄소에어로젤 복합전극은 촉매 분야에서 활용되고 있는 다공성 지지체인 실리카젤을 첨가함으로써 CDI 반응진행에 대한 전극활물질 탈락이 없이 전극의 성형성이 크게 향상되었고, 친수성과 전극의 기계적 강도 증가 및 CDI 효율을 증가시킬 수 있었다. 이러한 45개의 전극을 하나의 묶음으로 네 개의 단을 직렬연결 하여, CDI 시스템을 구성하였고 충전 시에는 1.2V, 방전 시에는 0.001V를 각각 10분간 인가하여 실험한 결과 $99\%$ 이상의 CDI 효율을 달성하였다.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6816-6822
• /
• 2015

본 연구에서는 기존의 글라스울의 흡습에 의한 변형을 해결하고 단열성능향상을 위해 실리카 에어로젤을 이용한 단열재를 개발하였다. 글라스울 단열재에 액상의 혼합 바인더를 이용하여 실리카에어로젤이 함침된 글라스울 복합체를 제조하였다. 액상의 혼합 바인더는 수용성바인더(CMC, carboxymethyl cellulose)와 물에 분산시킨 실리카 에어로젤을 이용하여 준비하였다. 초기 $0.048g/cm^3$의 밀도를 갖는 글라스울 보드를 준비하고 실리카 에어로젤을 함침시켜 $0.065g/cm^3$의 밀도를 갖는 단열보드를 제작할 수 있었다. 이렇게 제조된 실리카 에어로젤 함침 글라스울 보드 복합체는 단일 글라스울 보드의 단열성능보다 7.4% 향상된 0.0315 W/mK의 열전도율(thermal conductivity)을 나타내었다. 제조된 실리카 에어로젤-글라스울 복합체는 불꽃 관통시험에서 362초간 내화 저항성을 나타내어 단일 글라스울 보드에 비하여 2.7배나 높은 내화성능을 보였다. 또한 일반 글라스울 보드는 흡습에 의하여 수직방향으로 처짐현상을 나타내는 단점이 있었으나, 실리카 에어로젤이 함침된 보드에서는 실리카 에어로젤의 발수특성으로 인하여 높은 내수성능을 나타내는 것을 확인하였다.

• 청정기술
• /
• 제29권4호
• /
• pp.237-243
• /
• 2023

에어로젤은 지금까지 알려진 가장 단열성이 우수한 소재이지만 유연성이 없고 강도가 매우 낮아 부직포나 섬유에 에어로젤을 담지한 블랭킷이 현실적으로 가장 활용이 가능한 형태이다. 그러나 에어로젤 블랭킷도 분말 발생을 피할 수 없고 유연성이 부족하고 변형 가능성이 있는 문제가 있으므로 아직은 범용으로 사용되지는 못하고 있다. 본 연구에서는 이를 해결하기 위하여 진공 처리, 표면 처리, 복합 소재화 기술을 적용하였고 일부 시제품도 제작하였다. 에어로젤 블랭킷을 알루미늄 시트로 감싼 다음 네 끝을 봉하고 진공을 뽑으면 단열성이 블랭킷 자체보다도 우수한 소재가 될 수 있다. 에어로젤 블랭킷을 수지로 도포하여 표면 처리하면 에어로젤 성형체를 만들 수 있다. 에어로젤 블랭킷에 여러 겹으로 수지나 섬유로 라미네이팅하여 복합체로 만들면 유연성을 지닌 단열소재로 활용할 수 있다. 특히 기공이 조절된 테플론 멤브레인을 활용한 복합체는 투습 및 방수 기능까지 보유하여 의복에 사용할 수 있다. 수지와 섬유의 에어로젤 블랭킷 복합체를 활용하여 방한화용 깔창과 야외용 깔개 시제품도 제작하였다. 에어로젤을 활용하여 제작한 깔창 및 야외 깔개의 열전도는 20 mW m^-1 K^-1 이하로 단열성이 뛰어났으며, 유연성과 내구성도 우수하였다.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1318-1323
• /
• 2013

Thermal insulation material was prepared by cross-linking chemical reaction of silica aerogel and epoxy resin, which has a high porous and vacant properties. The structural, mechanical, and thermal properties were analyzed in order to verify its application for industrial and electrical applications. The thermal conductivities were changed from 115 mW/mK to 75 mW/mK by reducing the contents of nano-porous silica areogel powders. The compressive loading is also decreased by increasing the contents of silica aerogels by 20 wt% in aerogel/epoxy composites. It is concluded that the formulated composite materials can be applied to building materials, electronics parts, and heavy industries.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1362-1367
• /
• 2012

High porous silica aerogel/polyurethane polymer composite was manufactured by cross-linking polymerization of polyurethane foaming process. The properties of microstructure, mechanical strength, and thermal properties were investigated for its various applications. The superhydrophobic silica aerogel powders were used for highly thermal insulation filler materials. The thermal conductivities can be resulted 0.07 W/mK to 0.13 W/mK, by decreasing the contents of silica aerogels in composite materials. It is found that the polymerization formulation by organic binders can be applied to heavy industires, building materials, and various industries.

• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.204-211
• /
• 2021

We report, synthesis of high surface area composite carbon aerogel using additive based polymerization technique by incorporating graphitic porous carbon as additive. This additive was separately prepared using sol-gel polymerization of resorcinol-furfuraldehyde in iso-propyl alcohol medium at much above the routine gelation temperature to yield porous carbon (CA-IPA) having graphitic layered morphology. CA-IPA exhibited a unique combination of meso-pore dominated surface area (~ 700 m²/g) and good conductivity of ~ 300 S/m. The composite carbon aerogel (CCA) was synthesized by traditional aqueous medium based resorcinol-formaldehyde gelation with CA-IPA as additive. The presence of CA-IPA favored enhanced meso-porosity as well as contributed to improvement in bulk conductivity. Based on the surface area characteristics, CCA-8 composition having 8% additive was found to be optimum. It showed specific surface area of ~ 2056 m²/g, mesopore area of 827 m²/g and electrical conductivity of 180 S/m. The electrode formed with CCA-8 showed improved electrochemical behavior, with specific capacitance of 148 F/g & ESR < 1 Ω, making it a better choice as super capacitor for energy storage applications.