• 소음진동
• /
• 제7권5호
• /
• pp.819-826
• /
• 1997

The finite element analyses of a composite hingeless rotor blade in forward flight have been performed to investigate the influence of blade design parameters on the blade stability. The blade structure is represented by a single cell composite box-beam and its nonclassical effects such as transverse shear and torsion-related warping are considered. The nonlinear periodic differential equations of motion are obtained by moderate deflection beam theory and finite element method based on Hamilton principle. Aerodynamic forces are calculated using the quasi-steady strip theiry with compressibility and reverse flow effects. The coupling effects between the rotor blade and the fuselage are included in a free flight propulsive trim analysis. Damping values are calculated by using the Floquet transition matrix theory from the linearized equations perturbed at equilibrium position of the blade. The aeroelastic results were compared with an alternative analytic approch, and they showed good correlation with each other. Some parametric investigations for the helicopter design variables, such as pretwist and precone angles are carried out to know the aeroelastic behavior of the rotor.

• Wind and Structures
• /
• 제10권3호
• /
• pp.215-232
• /
• 2007

This paper presents an aeroelastic analysis procedure to highlight the influence of wind velocity on the structural damping and frequency of a long span cable-stayed bridge. Frequency dependent self-excited forces in terms of flutter derivatives are expressed as continuous functions using rational function approximation technique. The aeroelastically modified structural equation of motion is expressed in terms of frequency independent modal state-space parameters. The modal logarithmic dampings and frequencies corresponding to a particular wind speed are then determined from the eigen solution of the state matrix.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.173-178
• /
• 2005

In this paper, an efficient and robust analysis system for the flutter optimization of laminated composite wings has been developed using the coupled computational method based on the genetic algorithm. General three-dimensional doublet-lattice method is efficiently used to compute generalized aerodynamic forces of T-tail configuration in the frequency domain. Structural dynamic analyses of laminated composite T-tail models are conducted using finite clement method. The classical P-k flutter analysis technique is applied to effectively solve the aeroelastic governing equations in the frequency domain. Optimum design studies using genetic algorithm have been conducted in order to obtain maximum flutter stability of a composite T-tail configuration. The results show that flutter stability can be significantly increased using composite materials with proper optimum design concepts even for the same weight and shape condition. In the view point of engineering design, it is also importantly shown that the optimization of the vertical wing part is highly effective comparing to the optimization of horizontal wing part.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권1호
• /
• pp.34-44
• /
• 2003

An advanced aeroelastic analysis using a computational structural dynamics (CSD), finite element method (FEM) and computational fluid dynamics (CFD) is presented in this Paper. A general aeroelastic analysis system is originally developed and applied to realistic design problems in the transonic flow region, where strong shock wave interactions exist. The present computational approach is based on the modal-based coupled nonlinear analysis with the matched-point concept and adopts the high-speed parallel processing technique on the low-cost network based PC-clustered machines. It can give very accurate and useful engineering data on the structural dynamic design of advanced flight vehicles. For the nonlinear unsteady aerodynamics in high transonic flow region, Euler equations using the unstructured grid system have been applied to easily consider complex configurations. It is typically shown that the advanced numerical approach can give very realistic and practical results for design engineers and safe flight tests. One can find that the present study conducts a virtual flutter flight test which are usually very dangerous in reality.

• 항공우주시스템공학회지
• /
• 제17권6호
• /
• pp.82-93
• /
• 2023

본 논문에서는 층간분리 현상을 고려한 복합재 미사일 핀의 비선형 천음속 플러터 해석을 수행하였다. 층간분리 효과를 고려한 유한요소 진동해석 기법은 시험 결과와 비교 및 검증하였다. 비선형 천음속 플러터 해석은 자체 개발한 천음속 미소교란 방정식 기반의 시간영역 플러터 해석 프로그램을 개선하여 복합재 날개의 층간분리 효과까지 고려할 수 있도록 확장하여 활용하였다. 복합재 미사일 핀 모델에 대해 층간분리 영역에 따른 아음속, 천음속 및 초음속 플러터 해석을 수행하고 층간분리 영향에 따른 공력탄성학적 특성을 고찰하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.76-77
• /
• 2010

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.337-338
• /
• 2011

• 항공우주기술
• /
• 제7권2호
• /
• pp.205-212
• /
• 2008

본 논문에서는 스마트무인기 로터시스템의 공진, 로터 공탄성 안정성 및 휠플러터 안정성 해석을 위한 모델링 데이터와 최종 해석결과를 기술하였다 향후 날개구조 설계변경 가능성을 고려하여 날개 빔, 코드 및 비틀림 강성이 훨플러터 안정성에 미치는 영향이 분석되었다. 파라메트릭 분석 결과 날개의 비틀림 강성 및 빔강성의 변화가 코드방향 강성에 비하여 빔모드 댐핑값에 훨씬 큰 영향을 미치는 것으로 분석되었다. 최종 설계된 로터시스템은 공진가능성이 없고, 스마트무인기 TR-S4 로터/파일론/날개에 대하여 로터 공탄성 안정성 및 훨플러터 안정성이 보장됨을 해석적으로 확인하였다.

• 한국항공우주학회지
• /
• 제33권5호
• /
• pp.28-33
• /
• 2005

이선형 플런지 스프링을 가지는 2차원 단면 익형 모델에 대하여 초음속 비선형 공탄성 해석을 수행하였다. 초음속 비정상 공기력 계산을 위해 DPM을 사용하였고 최소상태접근법을 사용하여 근사하였다. 비선형 플러터 해석을 위해 구조 비선형성을 비대칭 이선형 스프링으로 모델링하고 기술 함수 법을 사용하여 선형화하였다. 선형 및 비선형 플러터 해석 결과들은 공력탄성학적 특성들이 주파수 비에 중요한 영향을 받는다는 것을 보여준다. 비선형 플러터 해석으로부터 다양한 제한 주기 운동이 선형플러터 속도 이하 또는 이상에서 관측되었다. 또한 플러터 특성과 응답을 시간영역에서도 조사하였다.

• Wind and Structures
• /
• 제26권4호
• /
• pp.231-251
• /
• 2018

The objective of the investigation is the analysis of wind-tunnel experimental errors, associated with the measurement of aeroelastic coefficients of bridge decks (Scanlan flutter derivatives). A two-degree-of-freedom experimental apparatus is used for the measurement of flutter derivatives. A section model of a closed-box bridge deck is considered in this investigation. Identification is based on free-vibration aeroelastic tests and the Iterative Least Squares method. Experimental error investigation is carried out by repeating the measurements and acquisitions thirty times for each wind tunnel speed and configuration of the model. This operational procedure is proposed for analyzing the experimental variability of flutter derivatives. Several statistical quantities are examined; these quantities include the standard deviation and the empirical probability density function of the flutter derivatives at each wind speed. Moreover, the critical flutter speed of the setup is evaluated according to standard flutter theory by accounting for experimental variability. Since the probability distribution of flutter derivatives and critical flutter speed does not seem to obey a standard theoretical model, polynomial chaos expansion is proposed and used to represent the experimental variability.