• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.187-192
• /
• 2006

Helicopter noise has been considered as one of major design factors like a performance and safety since the public acceptance, comfortability and stealth aspects were important for customers. According to the airworthiness regulation, the noise levels in throe different flight conditions shall comply with the specific limits. Main and tail rotors noise is most dominant in far field due to the low and mid range frequency characteristics. It is an air-born noise so That the accurate aerodynamic data is necessary for the accurate noise prediction. In KARI, low noise main and tail rotors as well as analysis codes have been developed since 2000. The approach for low noise main rotor is a kind of tip modifications, so called twin vortices tip to reduce the BVI noise. Analysis results show the 9.3dB reduction in terms of pseudo EPNL. The uneven spacing concept is applied for low noise tail rotor. Three or four decibel noise reduction is achieved by new optimized uneven spacing. Rotor noise and aerodynamic prediction codes have been improved also.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.164-169
• /
• 2005

Microphone array techniques are being used widely in wind tunnel measurements for identification of the distributed aerodynamic noise sources on the model being tested. Depending on the frequencies and sound levels, conventional beamforming algorithm has limitation in separating two adjacent sources. Several modifications to the classical beamforming have been developed to enhance way resolution and reduce sidelobe levels. In this Paper the robust adaptive beamforming and the CLEAN algorithm are used to compare to the result of conventional beamforming method. It is found that the CLEAN algorithm is capable of pin-pointing locations of multiple sources nearby, while these sources are unidentifiable with robust adaptive or conventional beamforming techniques.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.172-177
• /
• 2004

In the present work, we have interests on the modification of parallel implemented with MPI(Message Passing Interface) programming method, 3-Dimensional, unsteady, incompressible Navier-Stokes equation solver to analyze the low-Reynolds number flow In order to accurate calculation aerodynamic coefficients in low-Reynolds number flow field, we modified the two-equation turbulence model. This paper describes the development and validation of a new two-equation model for the prediction of flow transition. It is based on Mentor's low Reynolds $\kappa-\omega$ model with modifications to include Total Stresses Limitation (TSL) and Separation Transition Trigger (STT)

• Wind and Structures
• /
• 제37권2호
• /
• pp.163-178
• /
• 2023

The paper reviews and discusses the substantive changes to the ASCE 49-21 Standard, Wind Tunnel Testing for Buildings and Other Structures. The most significant changes are the requirements for wind field simulations that utilize (i) partial turbulence simulations, (ii) partial model simulations for the flow around building Appurtenances, along with requirements for determining wind loads on products that are used at multiple sites in various configurations. These modifications tend to have the effect of easing the precise scaling requirements for flow simulations because it is not generally possible to construct accurate models for small elements placed, for example, on large buildings at the scales typically available in boundary layer wind tunnels. Additional discussion is provided on changes to the Standard with respect to measurement accuracy and data acquisition parameters, such as duration of tests, which are also related to scaling requirements. Finally, research needs with respect to aerodynamic mechanisms are proposed, with the goal of improving the understanding of the role of turbulence on separated-reattaching flows on building surfaces in order to continue to improve the wind tunnel method for determining design wind loads.

• Wind and Structures
• /
• 제35권1호
• /
• pp.55-66
• /
• 2022

Tall buildings are often subjected to steady and unsteady forces due to external wind flows. Measurement and mitigation of these forces becomes critical to structural design in engineering applications. Over the last few decades, many approaches such as modification of the external geometry of structures have been investigated to mitigate wind-induced load. One such proven geometric modification involved the rounding of sharp corners. In this work, we systematically analyze the impact of rounded corner radii on the reducing the flow-induced loading on a square cylinder. We perform 3-Dimensional (3D) simulations for high Reynolds number flows (Re=1 × 105) which are more likely to be encountered in practical applications. An Improved Delayed Detached Eddy Simulation (IDDES) method capable of capturing flow accurately at large Reynolds numbers is employed in this study. The IDDES formulation uses a k-ω Shear Stress Transport (SST) model for near-wall modelling that prevents mesh-induced separation of the boundary layer. The effects of these corner modifications are analyzed in terms of the resulting variations in the mean and fluctuating components of the aerodynamic forces compared to a square cylinder with no geometric changes. Plots of the angular distribution of the mean and fluctuating coefficient of pressure along the square cylinder's surface illustrate the effects of corner modifications on the different parts of the cylinder. The windward corner's separation angle was observed to decrease with an increase in radius, resulting in a narrower and longer recirculation region. Furthermore, with an increase in radius, a reduction in the fluctuating lift, mean drag, and fluctuating drag coefficients has been observed.

• Wind and Structures
• /
• 제35권3호
• /
• pp.213-227
• /
• 2022

The design of a building is a complex process that encompasses different fields: one of the most relevant is nowadays the energetic one, which has led to the introduction of new typologies of building envelopes. Among them, the Permeable Double Skin Façades (PDSF) are capable to reduce the solar impact and so to improve the energetic performances of the building. However, the aerodynamic characterization of a building with a PDSF is still little investigated in the current literature. The present paper proposes an experimental study to highlight the modifications induced by the outer porous façade in the aerodynamics of a building. A dedicated wind tunnel study is conducted on a rigid model of a prismatic high-rise building, where different façade configurations are tested. Specifically, the single-layer façade is compared to two PDSFs, the former realized with perforated metal and the latter with expanded metal. Outcomes of the tests allow estimating the cladding loads for all the configurations, quantifying the shielding effects ascribable to the porous layers that are translated in a significant reduction of the design pressure that could be up to 50%. Moreover, the impact of the PDSFs on the vortex shedding is investigated, suggesting the capability of the façade to suppress the generation of synchronised vortices and so mitigate the structural response of the building.

• 한국추진공학회지
• /
• 제15권2호
• /
• pp.15-22
• /
• 2011

한국항공우주연구원의 스크램제트 엔진 시험설비(이하 SETF)는 극초음속 추진기관 성능시험 설비로 일반 공력 풍동과 달리 엔진이 구동하는 비행 고도, 마하수에서의 엔탈피를 모사해야 한다. SETF는 불어내기 식으로 고압공기 공급원으로부터 공급된 고압 공기를 축열식 가열시스템으로 가열시킨 후 시험부에 장착된 노즐을 통과. 팽창하여 엔진 시험 조건을 모사하며, 공기 이젝터를 구동하여 고고도 조건과 설비 시동 조건을 구현한다. SETF의 시험부는 자유제트 형식으로 시험엔진 시작점을 노즐 출구면에 일치시킬 경우 비행체에서 발생되는 경계층과 엔진의 상호 작용을 파악할 수 있는 반면, 설비 시동 특성을 예측하기 힘들어 시험을 통한 설비 특성 파악이 필수적이다. 본 논문에는 SETF의 마하수 및 시험 모델 변화에 따른 시동 성능 그리고 시동 성능 개선을 위하여 수행된 이젝터 설계 변경 과정을 정리하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.451-458
• /
• 2010

한국항공우주연구원의 스크램제트 엔진 시험설비(이하 SETF)는 극초음속 추진기관 성능시험 설비로 일반 공력 풍동과 달리 엔진이 구동하는 비행 고도, 마하수에서의 엔탈피를 모사해야 한다. SETF는 불어내기 식으로 고압공기 공급원으로부터 공급된 고압 공기를 축열식 가열시스템으로 가열시킨 후 시험부에 장착된 노즐을 통과. 팽창하여 엔진 시험 조건을 모사하며, 공기 이젝터를 구동하여 고고도 조건과 설비 시동 조건을 구현한다. SETF의 시험부는 자유제트 형식으로 시험엔진 시작점을 노즐 출구면에 일치시킬 경우 비행체에서 발생되는 경계층과 엔진의 상호 작용을 파악할 수 있는 반면, 설비 시동 특성을 예측하기 힘들어 시험을 통한 설비 특성 파악이 필수적이다. 본 논문에는 SETF의 마하수 및 시험 모델 변화에 따른 시동 성능 그리고 시동 성능 개선을 위하여 수행된 이젝터 설계 변경 과정을 정리하였다.

• 한국음향학회지
• /
• 제43권4호
• /
• pp.422-435
• /
• 2024

본 연구의 목적은 안면 마스크가 한국어에 미치는 영향을 음향적, 공기역학적, 포먼트 매개변수 측면에서 검증하고자 하였다. 국내에서 판매되는 모든 종류의 마스크를 필터 성능과 접이식 방식을 기준으로 선택하였다. 본 연구에는 표준 한국어를 구사하는 경력 20년 이상의 한국인 전문 성우 2명(남녀)이 음성 데이터의 화자로 참여하였다. 연구 결과, 안면 마스크는 고주파수 범위를 약화시켜 Vowel Space Area(VSA) 및 Vowel Articulation Index(VAI) 점수를 감소시키고 모든 음성 샘플에서 Low-to-High spectral ratio(L/H ratio)을 증가시킨 것으로 나타났다. 이로 인해 음성 명료도가 낮아질 수 있음을 파악하였다. 그러나 음성 특성에 따라 증가 및 감소 정도가 결정되며 여성 화자의 경우 안면 마스크 두께가 증가함에 따라 Speech Level(SL)과 Cepstral Peak Prominence(CPP)가 증가하였다. 그러나 남성 화자의 경우 안면 마스크 두께가 증가함에 따라 이 두 매개변수가 감소하였다. 결론적으로, 본 연구에서는 마스크의 유무나 필터 성능이 음성 특성에 따른 음성 음향 매개변수에 영향을 미치는 것으로 나타났다. 안면 마스크는 음성 강도가 충분히 강하지 않거나 환경의 반향이 덜할 때 음성 노력에 영향을 미치는 것으로 나타났다. 마스크 착용시 음향 변형을 극복하기 위해 안면 마스크로 유도된 음성 노력에 대한 추가적인 연구가 수행되어야 함을 시사한다.