3D Numerical investigation of a rounded corner square cylinder for supercritical flows |
Vishwanath, Nivedan
(Department of Mechanical Engineering, BITS Pilani Hyderabad Campus)
Saravanakumar, Aditya K. (Department of Mechanical Engineering, BITS Pilani Hyderabad Campus) Dwivedi, Kush (Department of Mechanical Engineering, BITS Pilani Hyderabad Campus) Murthy, Kalluri R.C. (Department of Mechanical Engineering, BITS Pilani Hyderabad Campus) Gurugubelli, Pardha S. (Department of Mechanical Engineering, BITS Pilani Hyderabad Campus) Rajasekharan, Sabareesh G. (Department of Mechanical Engineering, BITS Pilani Hyderabad Campus) |
1 | Chiarini, A. and Quadrio, M. (2022), "The importance of corner sharpness in the BARC test case: A numerical study", Wind and Structures, 34(1), 43-58. https://doi.org/10.12989/was.2022.34.1.043. DOI |
2 | Ono, Y. and Tamura, T. (2008), LES of Flow Around a Circular Cylinder in the Critical Reynolds Number Region. |
3 | Rodriguez, I, Lehmkuhl, O., Chiva, J., Borrell, R. and Oliva, A. (2015), "On the flow past a circular cylinder from critical to super-critical Reynolds numbers: Wake topology and vortex shedding", Int. J. Heat Fluid Flow, 55, 91-103. https://doi.org/10.1016/j.ijheatfluidflow.2015.05.009. DOI |
4 | Yeon, S.M., Yang, J. and Stern, F. (2016), "Large-eddy simulation of the flow past a circular cylinder at sub- to super-critical Reynolds numbers", Appl. Ocean Res., 59, 663-675. https://doi.org/10.1016/j.apor.2015.11.013. DOI |
5 | Cao, Y. and Tamura, T. (2018b), "Shear effects on flows past a square cylinder with rounded corners at Re=2.2 × 104", J. Wind Eng. Ind. Aerod., 174, 119-132. https://doi.org/10.1016/j.jweia.2017.12.025. DOI |
6 | Chen, J. (2018), Effect of Aspect Ratio on the Flow Structures Behind a Square Cylinder, University of Winsdor, Winsdor. https://scholar.uwindsor.ca/etd/7507. |
7 | Spalart, P. and Rumsey, C. (2007), "Effective inflow conditions for turbulence models in aerodynamic calculations", Aiaa J., 45, 2544-2553. https://doi.org/10.2514/1.29373. DOI |
8 | Spalart, P.R., Deck, S., Shur, M.L., Squires, K.D., Strelets, M. K.H. and Travin, A. (2006), "A new version of detached-eddy simulation, resistant to ambiguous grid densities", Theoretic. Comput. Fluid Dyn., 20, 181. https://doi.org/10.1007/s00162-006-0015-0. DOI |
9 | Choi, C.K. and Kwon, D.K. (1999), "Aerodynamic stability for square cylinder with various corner cuts", Wind Struct., 2(3), 173-187. http://dx.doi.org/10.12989/was.1999.2.3.173. DOI |
10 | Menter, F.R. (2004), "Two-equation eddy-viscosity turbulence models for engineering applications", AIAA J., 32(8), 1598-1605. https://doi.org/10.2514/3.12149. DOI |
11 | Taylor, G.I. (1938), "The spectrum of turbulence", Proceedings of the Royal Society of London. Series A - Mathematical and Physical Sciences, 164(919), 476-490. https://doi.org/10.1098/rspa.1938.0032. DOI |
12 | Hayase, T., Humphrey, J.A.C. and Greif, R. (2008), "A consistently formulated QUICK scheme for fast and stable convergence using finite-volume iterative calculation procedures", J. Comput. Phys., 98, 108-118. https://doi.org/10.1016/0021-9991(92)90177-Z. DOI |
13 | Schewe, G. (1983), "On the force fluctuations acting on a circular cylinder in crossflow from subcritical up to transcritical Reynolds numbers", J. Fluid Mech., 133, 265-285. https://doi.org/10.1017/S0022112083001913. DOI |
14 | Choi, C.K. and Kwon, D.K. (2003), "Effects of corner cuts and angles of attack on the Strouhal number of rectangular cylinders", Wind Struct., 6(2), 127-140. http://dx.doi.org/10.12989/was.2003.6.2.127. DOI |
15 | Maryami, R., Showkat Ali, S., Azarpeyvand, M., Dehghan, A.A. and Afshari, A. (2019), "Turbulent flow interaction with a circular cylinder", 25th AIAA/CEAS Aeroacoustics Conference. https://doi.org/10.1063/1.5119967. DOI |
16 | Bai, H. and Alam, M.M. (2018), "Dependence of square cylinder wake on Reynolds number", Phys. Fluids, 30, 015102. https://doi.org/10.1063/1.4996945. DOI |
17 | Sohankar, A. (2006), "Flow over a bluff body from moderate to high Reynolds numbers using large eddy simulation", Comput. Fluids, 35, 1154-1168. https://doi.org/10.1016/j.compfluid.2005.05.007. DOI |
18 | Gurugubelli, P.S. and Jaiman, R.K. (2019), "Large amplitude flapping of an inverted elastic foil in uniform flow with spanwise periodicity", J. Fluids Struct., 90, 139-163. https://doi.org/10.1016/j.jfluidstructs.2019.05.009. DOI |
19 | Menter, F.R. and Kuntz, M. (2004), "Adaptation of eddy-viscosity turbulence models to unsteady separated flow behind vehicles", Aerod. Heavy Vehicles: Trucks, Buses, and Trains, 339-352. https://doi.org/10.1007/978-3-540-44419-0_30. DOI |
20 | Shur, M.L., Spalart, P.R., Strelets, M.Kh. and Travin, A. (2008), "A hybrid RANS-LES approach with delayed-DES and wallmodelled LES capabilities", Int. J. Heat and Fluid Flow, 29, 1638-1649. https://doi.org/10.1016/j.ijheatfluidflow.2008.07.001. DOI |
21 | Bearman, P. and Obasaju, E. (1982), "An experimental study of pressure fluctuations on fixed and oscillating square-section cylinders", J. Fluid Mech., 119, 297-321. https://doi.org/10.1017/S0022112082001360. DOI |
22 | Saathoff, P. and Melbourne, W.H. (1999), "Effects of freestream turbulence on streamwise pressure measured on a squaresection cylinder", J. Wind Eng. Ind. Aerod., 79(1-2), 61-78. https://doi.org/10.1016/S0167-6105(98)00112-3. DOI |
23 | Okamoto, S. and Uemura, N. (1991), "Effect of rounding sidecorners on aerodynamic forces and turbulent wake of a cube placed on a ground plane", Experimen. Fluids, 11, 58-64. https://doi.org/10.1007/BF00198432. DOI |
24 | Park, D. and Yang, K. (2016), "Flow instabilities in the wake of a rounded square cylinder", J. Fluid Mech., 793, 915-932. https://doi.org/10.1017/jfm.2016.156. DOI |
25 | Nishimura, H. and Taniike, Y. (2000), "Fluctuating pressures on a two-dimensional square prism", J. Struct. Construct. Eng. Transact. AIJ, 65, 37-43. http://dx.doi.org/10.3130/aijs.65.37_3. DOI |
26 | Li, C., Chen, Z., Tse, K.T., Weerasuriya, A., Zhang, X., Fu, Y. and Lin, X (2022), "The linear-time-invariance notion of the koopman analysis-part 1: The architecture, practical rendering on the prism wake, and fluid-structure association", https://doi.org/10.48550/arXiv.2112.02985. DOI |
27 | Lander, D.C., Letchford, C.W., Amitay, M. and Kopp, G.A. (2016), "Influence of the bluff body shear layers on the wake of a square prism in a turbulent flow", Phys. Rev. Fluids, 4(1), 044406. https://doi.org/10.1103/PhysRevFluids.1.044406. DOI |
28 | McLean, I. and Gartshore, I. (1992), "Spanwise correlations of pressure on a rigid square section cylinder", J. Wind Eng. Ind. Aerod., 41(1-3), 797-808. https://doi.org/10.1016/0167-6105(92)90498-Y. DOI |
29 | Kwok, K.C.S., Wilhelm, P.A. and Wilkie, B.G. (1988), "Effect of edge configuration on wind-induced response of tall buildings", Eng. Struct., 10, 135-140. https://doi.org/10.1016/0141-0296(88)90039-9. DOI |
30 | Lee, B.E. (1975), "The effect of turbulence on the surface pressure field of a square prism", J. Fluid Mech., 69, 263-282. https://doi.org/10.1017/S0022112075001437. DOI |
31 | Haque, M.N. (2020), "Effectiveness of corner modification to optimize aerodynamic responses of square cylinder", J. Phys.: Conference Series, 1519, 12-18. https://doi.org/10.1088/1742-6596/1519/1/012018. DOI |
32 | Aswathy, M.S., Amrita, K.K., Hariprasad, C.M. and Kumar, R.A. (2015), "Near-wake flow structures of a corner-chamfered square cylinder at higher harmonic excitations", In Fluids Engineering Division Summer Meeting, American Society of Mechanical Engineers. https://doi.org/10.1115/AJKFluids2015-12675. DOI |
33 | Delany, N.K. and Sorensen, N.E. (1953), Low-Speed Drag of Cylinders of Various Shapes. https://digital.library.unt.edu/ark:/67531/metadc56716/. |
34 | Kawai, H. (1998), "Effect of corner modifications on aeroelastic instabilities of tall buildings", J. Wind Eng. Ind. Aerod., 74-76, 719-729. https://doi.org/10.1016/S0167-6105(98)00065-8. DOI |
35 | Shiraishi, N., Matsumoto, M., Shirato, H. and Ishizaki, H. (1988), "On aerodynamic stability effects for bluff rectangular cylinders by their corner-cut", Journal of Wind Engineering and Industrial Aerodynamics, 28, 371-380. https://doi.org/10.1016/0167-6105(88)90133-X. DOI |
36 | Rehacek, D., Khel, T., Kucera, J., Vopravil, J. and Petera, M. (2017), "Effect of windbreaks on wind speed reductionand soil protection against wind erosion", Soil Water Res., 12, 128-135. https://doi.org/10.1016/j.jaridenv.2004.10.005. DOI |
37 | Cornelis, W.M. and Gabriels, D. (2005), "Optimal windbreak design for wind-erosion control", J. Arid Environ, 61, 315-332. https://doi.org/10.1016/j.jaridenv.2004.10.005. DOI |
38 | Young-Moon, K., Ki-Pyo, Y. and Nag-Ho, K. (2008), "Acrosswind responses of an aeroelastic tapered tall building", J. Wind Eng. Ind. Aerod., 96(8-9), 1307-1319. http://dx.doi.org/10.1016/j.jweia.2008.02.038. DOI |
39 | Tsai, B. and Shaiu, B. (2011), "Experimental study on the flow characteristics for wind over a two-dimensional upwind slope escarpment", J. Marine Sci. Technol., 19(5), 1. http://dx.doi.org/10.51400/2709-6998.2159. DOI |
40 | Tse, K.T., Hitchcock, P.A., Kwok, K.C.S., Thepmongkorna, S. and Chanb, C.M. (2009), "Economic perspectives of aerodynamic treatments of square tall buildings", J. Wind Eng. Ind. Aerod., 97, 455-467. https://doi.org/10.1016/j.jweia.2009.07.005. DOI |
41 | Yi, L., Chao, L., Qiu-Sheng, L., Qian, S., Xuan, H. and Yong-Gui, L. (2020), "Aerodynamic performance of CAARC standard tall building model by various corner chamfers", J. Wind Eng. Ind. Aerod., 202, 104-197. https://doi.org/10.1016/j.jweia.2020.104197. DOI |
42 | Lee, B.E. (1975), "Some effects of turbulence scale on the mean forces on a bluff body", J. Wind Eng. Ind. Aerod., 1, 361-370. https://doi.org/10.1016/0167-6105(75)90030-6. DOI |
43 | Tamura, T. and Miyagi, T. (1999), "The effect of turbulence on aerodynamic forces on a square cylinder with various corner shapes", J. Wind Eng. Ind. Aerod., 83, 135-145. https://doi.org/10.1016/S0167-6105(99)00067-7. DOI |
44 | Hu, J.C., Zhou, Y. and Dalton, C. (2006), "Effects of the corner radius on the near wake of a square prism", Experimen. Fluids, 40, 106-118. DOI |
45 | Jaiman, R.K., Sen, S. and Gurugubelli, P.S. (2015), "A fully implicit combined field scheme for freely vibrating square cylinders with sharp and rounded corners", Comput. Fluids, 112. https://doi.org/10.1016/j.compfluid.2015.02.002. DOI |
46 | Zhang, W. and Samtaney, R. (2016), "Low-Re flow past an isolated cylinder with rounded corners", Comput. Fluids, 136. https://doi.org/10.1016/j.compfluid.2016.06.025. DOI |
47 | Carassale, L., Freda, A. and Marre-Brunenghi, M. (2014), "Experimental investigation on the aerodynamic behavior of square cylinders with rounded corners", J. Fluids Struct., 112, 195-204. https://doi.org/10.1016/j.jfluidstructs.2013.10.010. DOI |
48 | Wang, X. and Gu, M. (2015), "Experimental investigation of Reynolds number effects on 2D rectangular prisms with various side ratios and rounded corners", Wind Struct., 21(2), 183-202. https://doi.org/10.12989/was.2015.21.2.183. DOI |
49 | Shi, L., Yang, G. and Yao, S. (2018), "Large eddy simulation of flow past a square cylinder with rounded leading corners: A comparison of 2D and 3D approaches", J. Mech. Sci. Technol., 32, 2671-2680. http://dx.doi.org/10.1007/s12206-018-0524-y. DOI |
50 | Miran S. and Sohn C.H. (2015), "Numerical study of the rounded corners effect on flow past a square cylinder", Int. J. Numer. Meth. Heat Fluid Flow, 25, 686-702. http://dx.doi.org/10.1108/HFF-12-2013-0339. DOI |
51 | Cao, Y. and Tamura, T. (2017), "Supercritical flows past a square cylinder with rounded corners", Phys. Fluids, 29(8), 85-110. https://doi.org/10.1063/1.4998739. DOI |
52 | Cao, Y. and Tamura, T. (2018a), "Aerodynamic characteristics of a rounded-corner square cylinder in shear flow at subcritical and supercritical Reynolds numbers", J. Fluids Struct., 82, 473-491. https://doi.org/10.1016/j.jfluidstructs.2018.07.012. DOI |
53 | Dai, S.S., Younis, B.A. and Zhang H.Y. (2017), "Prediction of turbulent flow around a square cylinder with rounded corners", J. Offshore Mech. Arctic Eng., 139. https://doi.org/10.1115/1.4035957. DOI |
![]() |