• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1223-1228
• /
• 2001

We have been developing the pantograph for Korean High Speed Train for the last five years. To fulfil the following requirements at designed speed of 350km/h ： 1) contact loss less than 1 ％, 2) aerodynamic noise less than 91dB, 3) average uplift force less than 200N, the pantograph has been modified two times since the first prototype pantograph was manufactured, By means of the following up characteristic test, low speed wind tunnel test, and high speed wind tunnel test for the prototype pantographs, we found that the aerodynamic uplift force did not exceed l60N at speed up to 350km/h and the aerodynamic noise was less than 88dB, that the following up characteristics of the prototype pantograph was excellent.

• International Journal of Aerospace System Engineering
• /
• 제10권1호
• /
• pp.1-13
• /
• 2023

The present study was attempted to investigate flow interference effects and the aerodynamic characteristics of the front and rear wings of a joined-wing aircraft by changing the configuration variables. The study was performed using a computational fluid dynamics(CFD) tool to demonstrate forward flight and analyze aerodynamic characteristics. A total of 9 configurations were analyzed with variations on the position, height, dihedral angle, incidence angle, twist angle, sweepback angle, and wing area ratio of the front and rear wings while the fuselage was fixed. The quantities of aerodynamic coefficients were confirmed in accordance with joined-wing configurations. The closer the front and rear wings were located, the greater the flow interference effects tended. Interestingly, the rear wing did not any configuration change, the lift coefficient of the rear wing was decreased when adjusted to increase the incidence angle of the front wing. The phenomenon was appeared due to an effective angle of attack alteration of the rear wing resulting from the flow interference by the front wing configurations.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1995년도 추계 학술대회논문집
• /
• pp.49-54
• /
• 1995

A numerical analysis on the effect of the front shape on the aerodynamic characteristics of HST model is made, using FVM based general purpose 3D Navier-Stokes eq. solver, TURBO-3D program. Numerical solutions are compared with each case of different front shape for HST model. The result shows a good quantitative aerodynamic characteristic tendencies for variation of front shape of HST. Thus it may be used as a basis in the design of the shape of real HST.

• 항공우주시스템공학회지
• /
• 제11권6호
• /
• pp.42-49
• /
• 2017

풍력 발전기 블레이드 공력 설계 프로세스를 정리하고 자체 개발한 프로그램을 이용하여 10kw 블레이드 공력 형상 설계를 진행하였다. 개념설계, 기본 형상 설계, 최적화 설계, 설계 검증 및 성능 해석순으로 진행하였으며, 각 설계 단계에서 중요한 설계 인자에 대해서 정리하였다. 또한 블레이드를 구성하는 단면 익형의 배치에 대한 가이드를 제시하였으며, 공력 설계를 검증하는 방법으로 stall margin 확인의 중요성에 대해서 정리하였다. 자체 개발한 설계 프로그램의 결과를 BEMT 기반의 전문 프로그램 DNVGL Bladed의 성능 해석 결과와 비교하여 제시하였다.

• 한국CDE학회논문집
• /
• 제5권2호
• /
• pp.184-195
• /
• 2000

MDO (Multidisciplinary Design Optimization) methodology is an emerging new technology to solve a complicate structural analysis and design problem with a large number of design variables and constraints. In this paper MDO methodology is adopted through the use of computer aided systems such as Geometric Solid Modeller, Mesh Generator, CAD system and CAE system. And this paper introduces MDO methodology as a new method for structural analysis and design through the application to the structural design of flap drive system. In a MDO methodology application to the structural design of flap drive system, kinetodynamic analysis is done using a simple aerodynamic analysis model for the air flow over the flap surface instead of difficult aerodynamic analysis. Simultaneously the structural static analysis is done to obtain the optimum structural condition. And the structural buckling analysis for push pull rod is also done to confirm the optimum structural condition (optimum cross section shape of push pull rod).

• Advances in aircraft and spacecraft science
• /
• 제7권5호
• /
• pp.441-458
• /
• 2020

Rectangular-to-Ellipse Shape Transition (REST) inlets are a class of inward turning inlets designed for hypersonic flight. The aerodynamic design of REST inlets involves very complex flows and shock-wave patterns. These inlets are used in highly integrated propulsive systems. Often the design of these inlets may require many geometrical constraints at different cross-section. In present work a design approach for hypersonic inward-turning inlets, adapted for REST inlets, is coupled with a multi-objective optimization procedure. The automated procedure iterates on the parametric representation and on the numerical solution of a base flow from which the REST inlet is generated by using streamline tracing and shape transition algorithms. The typical design problem of optimizing the total pressure recovery and mass flow capture of the inlet is solved by the proposed procedure. The accuracy of the optimal solutions found is discussed and the performances of the designed REST inlets are investigated by means of fully 3-D Euler and 3-D RANS analyses.

• 한국추진공학회지
• /
• 제8권1호
• /
• pp.70-80
• /
• 2004

본 연구에서는 한국과 같이 비교적 저 풍속인 지역에 적용 가능하도록 피치제어장치를 가진 1kW급 소형 풍력발전 시스템의 개발 결과를 제시하였다. 공력설계에서는 블레이드의 직경이 동급의 상용 블레이드 보다 과도하게 크지 않으면서도 저 풍속 지역에서 보다 효율적인 형상설계를 위해 여러 가지 설계 변수분석을 통한 파라미터 연구가 수행되었다. 또한 구조설계를 통해 풍력발전기에 작용하는 다양한 하중을 효과적으로 견딜 수 있는 경량의 복합재 구조가 설계되었다. 구조설계의 평가를 위해 유한요소 구조해석이 수행되었으며, 실물 구조시험을 수행하여 구조적 안전성을 확인하였다.

• 한국항공우주학회지
• /
• 제36권1호
• /
• pp.86-91
• /
• 2008

최근 항공기 예비설계 단계에서 여러 분야의 설계요소를 동시에 고려하는 다분야 통합설계(Multidisciplinary Design) 기법이 요구되고 있다. 본 연구에서는 CATIA를 기반으로 항공기 형상에 대한 공력, 구조, RF 스텔스의 성능 분석을 위한 통합시스템을 구축하였다. CATIA를 이용하여 공력, 구조, RF 스텔스 해석을 위한 동일 사각격자를 생성한 후 생성된 격자를 이용하여 공력특성과 구조변위를 계산하였다. 레이더 포착면적 (RCS) 계산은 사각격자로부터 삼각형 격자를 추가로 생성하여 수행하였다. 이 과정 중 각 해석분야의 입력 파일을 생성할 수 있는 변환코드를 개발하였다. 세부분야 해석기법으로 패널 코드 PANAIR, 전산구조해석 코드 NASTRAN, PO 기법에 기초한 RCS 해석코드를 사용하였다.

• 항공우주기술
• /
• 제3권2호
• /
• pp.248-255
• /
• 2004

본 논문에서는 반응면 기법(response surface method)과 2차원 Navier-Stokes 방정식 해법을 이용하여 에어포일을 설계하였다. 수치 실험점들은 D-optimal 방법을 기반으로 선정하였으며 반응면 함수는 JMP를 이용하여 2차의 함수로 구성하였다. 설계기법의 검증은 NACA 64621 에어포일을 기저로 하여 Bell 에어포일의 공력특성을 갖도록 역설계하여 수행하였다. 설계기법은 스마트 무인기의 장기체공 능력을 위한 에어포일과 무인기용 로터에 적합한 저 Reynolds 에어포일 설계에 적용하였으며 제약조건을 만족하는 우수한 공력특성의 에어포일을 획득할 수 있었다.

• 대한기계학회논문집B
• /
• 제30권11호
• /
• pp.1131-1138
• /
• 2006

Aerodynamic shape design of a partial admission turbine using CFD has been performed. Two step approaches are adopted in this study. Firstly, two-dimensional blade shape is optimized using CFD and genetic algorithm. Initially, the turbine cascade shape is represented by four design parameters. By controlling the design parameters as variables, the non-gradient search is analyzed for obtaining the maximum efficiency. The final two-dimensional blade proved to have a more blade power than the initial blade. Secondly, the three-dimensional CFD analysis including the nozzle, rotor and stator has been conducted. To avoid a heavy computational load due to an unsteady calculation, the frozen rotor method is implemented in steady calculation. The frozen rotor method can detect a variation of the flow-field dependent upon the blade's circumferential position relative to the nozzle. It gives a better idea of wake loss mechanism starting from the lip of the nozzle than the mixing plane concept. Finally, the combination of two and three dimensional design method of the partial admission turbine in this study has proven to be a robust tool in development phase.