• 공업화학
• /
• 제26권3호
• /
• pp.270-274
• /
• 2015

본 연구에서는 고농도 무전해 니켈도금 폐액을 처리하기 위한 고도산화공정 기술을 개발하였다. 추출, 농축 공정을 이용한 니켈 금속 회수보다는 폐수를 방류수 수준으로 처리할 수 있는 기술 개발을 위하여 차아인산염과 아인산염을 침전이 용이한 인산염으로 효과적으로 전환시킬 수 있는 공정 개발에 초점을 맞추었다. 광화학적 방법인 $UV/H_2O_2$ 방식을 채택하여 COD, $PO_4-P$ 변화 효율 및 과산화수소의 소모량을 분석함으로써 고농도 무전해 니켈도금 폐액의 고도산화처리 특성을 평가하였다. 특히, $UV/H_2O_2/O_3$ 방식으로 오존산화법을 추가함으로써 과산화수소 사용량을 30% 가량 절감하고 처리시간을 약 6 h 단축시킬 수 있었다.

• 한국물환경학회지
• /
• 제21권3호
• /
• pp.267-273
• /
• 2005

Dye wastewater generally contains strong color and non-biodegradable materials. Therefore, the conventional wastewater treatment plant can hardly meet the regulation of wastewater effluent water. In this study, a pilot plant of the conventional process followed by advanced oxidation process (AOP), was set up to treat the dying wastewater. The treatment efficiencies on the various candidate processes, such as ozone alone, UV alone, ozone/UV, $ozone/H_2O_2$, $H_2O_2/UV$ and $ozone/UV/H_2O_2$, were investigated in the various ozone and $H_2O_2$ doses. As the results, the $ozone/H_2O_2$ process, among the tested processes, showed the highest efficiency for removing color and $COD_{Cr}$. For color removal, the ozone alone process was enough without combining UV or $H_2O_2$. No significantly enhanced efficiency for removing color and $COD_{Cr}$ by UV irradiation was observed because of the very low transmittance of UV light in dye wastewater.

• 청정기술
• /
• 제23권2호
• /
• pp.158-162
• /
• 2017

철, 구리, 알루미늄, 니켈 등의 금속을 에칭하기 위한 에칭액으로 $FeCl_3$ 용액이 사용되며, 에칭 과정에서 $Fe^{3+}$가 $Fe^{2+}$로 환원되면서 에칭속도를 저하시키고, 에칭효율이 감소하게 된다. 또한 에칭 후 발생하는 염화철 에칭폐액은 환경적, 경제적으로 문제를 지니기 때문에 에칭액을 재생하여 재사용 할 필요가 있다. 본 연구에서는 $FeCl_2$ 용액에 HCl을 첨가한 후, 산화제로 $H_2O_2$, $NaClO_3$를 첨가하여 용액 내 $Fe^{2+}$를 산화시켰으며, 산화과정에서 산화-환원전위(ORP)와 산화율간의 관계를 조사하였다. ORP는 $H_2O_2$와 $NaClO_3$의 농도가 증가함에 따라 증가하였으며, 산화가 진행되면서 점차 감소하여 산화가 완료된 후에 일정한 ORP를 유지하였다. Nernst 식과 일치하는 결과를 보였다. 또한 충분한 양의 HCl 및 $H_2O_2$, $NaClO_3$를 첨가하였을 경우, 약 99% 이상 산화가 이루어짐을 알 수 있었다.

• 자원리싸이클링
• /
• 제26권2호
• /
• pp.18-24
• /
• 2017

$FeCl_3$ 용액은 금속의 에칭용액으로 사용되며, 사용 후 발생하는 $FeCl_3$ 에칭폐액은 환경적, 경제적으로 문제를 지니기 때문에 에칭액을 재사용할 필요가 있다. 본 연구에서는 $FeCl_2$ 용액에 HCl을 첨가 한 후, 산화제로 $H_2O_2$를 첨가하여 용액 내 $Fe^{2+}$를 산화시켰으며, 산화과정에서 산화-환원전위(ORP)와 산화율 간의 관계를 조사하였다. ORP는 HCl과 $H_2O_2$의 농도가 증가함에 따라 증가하였으며, 산화가 진행되면서 점차 감소하여 Nernst 식과 일치하는 결과를 보였다. 또한 충분한 양의 HCl과 $H_2O_2$를 첨가하였을 경우, 약 99% 이상 산화가 이루어짐을 알 수 있었다.

• 열처리공학회지
• /
• 제22권6호
• /
• pp.354-360
• /
• 2009

This paper reports the oxidation mechanism of epitaxial Ni thin films grown on GaN/sapphire(0001) substrates, investigated by real-time x-ray diffraction and scanning electron microscopy. At the initial stage of oxidation process, a thin NiO layer with a thickness of ${\sim}50\;{\AA}$ was formed on top of the Ni films. The growth of such NiO layer was saturated and then served as a passive oxide layer for the further oxidation process. For the second oxidation stage, host Ni atoms diffused out to the surfaces of initially formed NiO layer through the defects running vertically to form NiO grains, while the sites that were occupied by host Ni, became voids. The crystallographic properties of resultant NiO films, such as grain size and mosaic distribution, rely highly on the oxidation temperatures.

• 한국환경과학회지
• /
• 제31권4호
• /
• pp.319-328
• /
• 2022

This study investigated the treatment of acetaminophen in municipal wastewater by conventional ozonation, ozone-based advanced oxidation, ozone/UV, and the electro-peroxone process. The ozone/UV process and electro-peroxone process of electric power consumption increased 1.25 and 2.04 times, respectively, compared to the ozone process. The pseudo-steady OH radical concentration was the greatest in the electro-peroxone process and lowest in the ozone process. The specific energy consumption for TOC decomposition of the ozone/UV process and electro-peroxone process were 22.8% and 15.5% of the ozone process, respectively. Results suggest that it is advantageous in terms of degradation performance and energy consumption to use a combination of processes in municipal wastewater treatment, rather than an ozone process alone. In combination with the ozone process, the electrolysis process was found to be more advantageous than the UV process.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.435-441
• /
• 2012

A new manufacturing process of Fe-Cr-Al powder porous metal was attempted. First, ultra-fine fecralloy powders were produced by using the submerged electric wire explosion process. Evenly distributed colloid (0.05~0.5% powders) was dispersed on PU (Polyurethane) foam through the electrospray process. And then degreasing and sintering processes were conduced. In order to examine the effect of sintering temperature in process, pre-samples were sintered for two hours at temperatures of $1350^{\circ}C$, $1400^{\circ}C$, $1450^{\circ}C$, and $1500^{\circ}C$, respectively, in $H_2$ atmospheres. A 24-hour TGA (thermo gravimetric analysis) test was conducted at $1000^{\circ}C$ in a 79% $N_2$+21% $O_2$ to investigate the high temperature oxidation behavior of powder porous metal. The results of the high temperature oxidation tests showed that oxidation resistance increased with increasing sintering temperature (2.57% oxidation weight gain at $1500^{\circ}C$ sintered specimen). The high temperature oxidation mechanism of newly manufactured Fe-Cr-Al powder porous metal was also discussed.

• 한국응용과학기술학회지
• /
• 제34권2호
• /
• pp.367-375
• /
• 2017

본 연구에서는 배가스 내 존재하는 오염물질인 NO의 처리효율을 증대시키기 위하여 NO 산화공정을 연구하였으며, 강력한 산화력의 건식산화제를 제조하는 방법으로 $H_2O_2$ 촉매분해가 도입되었다. $H_2O_2$ 분해공정 상에서 적용 가능한 $K-Mn/Fe_2O_3$ 불균일계 촉매가 제조되었으며, 이들이 가지는 물리화학적 특성이 $H_2O_2$ 분해반응에 미치는 영향이 조사되었다. 제조된 건식산화제는 NO가 포함된 모사 배가스를 처리하기 위한 NO 산화공정에 적용되었으며, 다양한 모사 배가스의 유량(5, 10, 20 L/min)에서 약 100% 가까운 NO 전환율을 확인 하였다.

• 한국분말재료학회지
• /
• 제21권1호
• /
• pp.55-61
• /
• 2014

Fe-Cr-Al powder porous metal was manufactured by using new electro-spray process. First, ultra-fine fecralloy powders were produced by using the submerged electric wire explosion process. Evenly distributed colloid (0.05~0.5% powders) was dispersed on Polyurethane foam through the electro-spray process. And then degreasing and sintering processes were conduced. In order to examine the effect of cell size ($200{\mu}m$, $450{\mu}m$, $500{\mu}m$) in process, pre-samples were sintered for two hours at temperature of $1450^{\circ}C$, in $H_2$ atmospheres. A 24-hour thermo gravimetric analysis test was conducted at $1000^{\circ}C$ in a 79% $N_2$ + 21% $O_2$ to investigate the high temperature oxidation behavior of powder porous metal. The results of the high temperature oxidation tests showed that oxidation resistance increased with increasing cell size. In the $200{\mu}m$ porous metal with a thinner strut and larger specific surface area, the depletion of the stabilizing elements such as Al and Cr occurred more quickly during the high-temperature oxidation compared with the 450, $500{\mu}m$ porous metals.

• 한국물환경학회지
• /
• 제25권1호
• /
• pp.90-95
• /
• 2009

This study investigates the oxidative degradation of N-nitrosodimethylamine (NDMA), a probable human carcinogen, by advanced oxidation process (i.e., UV process). The experiments were performed with various pH, initial concentration, UV intensity, and addition of $H_2O_2$ or $TiO_2$ on UV process. The results showed that the direct UV photolysis was the most effective treatment method. The lower pH, intial concentration and higher intensity of UV stimulated higher NDMA removal. However, addition of oxidant ($H_2O_2$, $TiO_2$) slows down photochemical treatment of NDMA since the oxidant can filter out the UV light and block it to reach the NDMA molecules. Dimethylamine (DMA) and nitrite were found to be a major byproduct from NDMA oxidation. To evaluate the chronic toxicity effects of UV-treated NDMA on the growth of microalgae, "Skeletonema costatum", was studied as long term experiments. Results demonstrated that after the 13 days exposure the chronic toxicity was decreased about 15% with application of UV process on NDMA degradation.