• 제목/요약/키워드: adsorption behavior

검색결과 489건 처리시간 0.023초

Effect of Core Morphology on the Decomposition of CCI₄ over the Surface of Core/Shell Structured Fe₂O₃/MgO Composite Metal Oxides

  • 김해진;강진;박동곤;권호진;Kenneth J. Klabunde
    • Bulletin of the Korean Chemical Society
    • /
    • 제18권8호
    • /
    • pp.831-840
    • /
    • 1997
  • Core/shell structured composite metal oxides of Fe2O3/MgO were prepared by thermal decomposition of Fe(acac)3 adsorbed on the surface of MgO cores. The morphology of the composites conformed to that of the MgO used as the cores. Broad powder X-ray diffraction peaks shifted toward larger d, large BET surface area (∼350 m2/g), and the size of crystalline domains in nano range (4 nm), all corroborate to the nanocrystallinity of the Fe2O3/MgO composite which was prepared by using nanocrystalline MgO as the core. By use of microcrystalline MgO as the core, microcrystalline Fe2O3/MgO composite was prepared, and it had small BET surface area of less than 35 m2/g. AFM measurements on nanocrystalline Fe2O3/MgO showed a collection of spherical aggregates (∼80 nm dia) with a very rough surface. On the contrary, microcrystalline Fe2O3/MgO was a collection of plate-like flat crystallites with a smooth surface. The nitrogen adsorption-desorption behavior indicated that microcrystalline Fe2O3/MgO was nonporous, whereas nanocrystalline Fe2O3/MgO was mesoporous. Bimodal distribution of the pore size became unimodal as the layer of Fe2O3 was applied to nanocrystalline MgO. The macropores in a wide distribution which the nanocrystalline MgO had were absent in the nanocrystalline Fe2O3/MgO. The decomposition of CCl4 was largily enhanced by the overlayer of Fe2O3 on nanocrystalline MgO making the reaction between nanocrystalline Fe2O3/MgO and CCl4 be nearly stoichiometric. The reaction products were environmentally benign MgCl2 and CO2. Such an enhancement was not attainable with the microcrystalline samples. Even for the nanocrystalline MgO, the enhancement was not attained, if not with the Fe2O3 layer. Without the layer of Fe2O3, it was observed that the nanocrystalline domain of the MgO transformed into microcrystalline one as the decomposition of CCl4 proceeded on its surface. It appeared that the layer of Fe2O3 on the particles of nanocrystalline Fe2O3/MgO blocked the transformation of the nanocrystalline domain into microcrystalline one. Therefore, in order to attain stoichiometric reaction between CCl4 and Fe2O3/MgO core/shell structured composite metal oxide, the morphology of the core MgO has to be nanocrystalline, and also the nanocrystalline domains has to be sustained until the core was exhausted into MgCl2.

글리세롤계 계면활성제 합성 및 계면 특성에 관한 연구 (Synthesis and Characterization of Interfacial Properties of Glycerol Surfactant)

  • 임종주;이슬;김병조;이종기;최규용
    • 공업화학
    • /
    • 제22권4호
    • /
    • pp.376-383
    • /
    • 2011
  • 글리시돌과 라우릴 알코올을 반응시켜 합성한 LA와 LA3 비이온계면활성제의 CMC는 각각 $0.97{\times}10^{-3}mol/L$, $1.02{\times}10^{-3}mol/L$이며, 1 wt% 농도에서의 표면장력은 26.99 mN/m과 27.48 mN/m이었다. 동적 표면장력 측정 결과에 의하면 LA와 LA3 비이온 계면활성제 모두, 공기와 수용액의 계면이 계면활성제 단분자에 의하여 비교적 짧은 시간 내에 포화되었으며, 1 wt% LA와 LA3 계면활성제 시스템들의 접촉각은 각각 27.8, $20.9^{\circ}$를 나타내었다. 비극성 오일 n-decane과 1 wt% 계면활성제 수용액 사이의 시간에 따른 계면장력은 시간에 따라 감소하며, LA와 LA3 시스템 모두 2~3 min 이내의 짧은 시간에 평형에 도달하였고, 평형에서의 계면장력 값은 각각 0.1524, 0.1716 mN/n을 나타내었다. $25^{\circ}C$에서의 계면활성제 수용액은 두 시스템 모두 비교적 안정한 상태를 유지하였고, LA 비이온 계면활성제가 LA3 비이온 계면활성제에 비하여 거품 안정성이 큼을 확인하였으며, 이러한 거품 안정성 측정 결과는 표면장력 측정 결과와도 일치하였다. 계면활성제, 물, 비극성 탄화수소 오일로 이루어진 3성분 시스템에 대하여 $25{\sim}60^{\circ}C$의 온도에서 상평형 실험을 수행한 결과, lower phase 마이크로에멀젼 혹은 oil in water (O/W) 마이크로에멀젼이 excess oil 상과 평형을 이루는 2상 영역만이 관찰되었을 뿐, lamellar liquid crystalline phase 혹은 middle-phase 마이크로에멀젼을 포함한 3상 영역은 나타나지 않았다.

저온 열처리가 탄소 음극재의 물리·화학적 특성 및 이차전지 성능에 미치는 영향 (Effect of Low Temperature Heat Treatment on the Physical and Chemical Properties of Carbon Anode Materials and the Performance of Secondary Batteries)

  • 황태경;김지홍;임지선;강석창
    • 공업화학
    • /
    • 제32권1호
    • /
    • pp.83-90
    • /
    • 2021
  • 본 연구에서는 저온 열처리 탄소의 물리·화학적 특성이 이차전지 음극재로서의 전기화학적 거동에 미치는 영향에 대하여 고찰하였다. 석유계 핏치의 코크스화를 위하여 600 ℃ 열처리를 수행하였으며 제조된 코크스는 700~1500 ℃로 탄화 온도를 달리하여 저온 열처리 탄소 음극재로 제조되었다. 탄소 음극재의 물리 화학적 특성은 N2 흡·탈착 등온선, X-ray diffraction (XRD), 라만 분광(Raman spectroscopy), 원소 분석 등을 통하여 확인하였으며,저온 열처리 탄소의 음극 특성은 반쪽 전지를 통한 용량, 초기 쿨롱 효율(ICE, initial Coulomb efficiency), 율속, 수명 등의 전기화학적 특성을 통하여 고찰하였다. 저온 열처리 탄소의 결정 구조는 1500 ℃ 이하에서 결정자의 크기와 진밀도가 증가하였으며 비표면적은 감소하였다. 저온 열처리 탄소의 물리화학적 특성 변화에 따라 음극재의 전기화학 특성이 변화하였는데 수명 특성은 H/C 원소 비, 초기 쿨롱 효율은 비표면적, 율속 특성은 진밀도의 특성에 기인하는 것으로 판단되었다.

한국.중국.일본 여성의 색조대장문화 (A Study on Make-up Culture of Korea, China and Japan)

  • 박보영;황춘섭
    • 복식
    • /
    • 제39권
    • /
    • pp.217-237
    • /
    • 1998
  • The present research is to study the make-up culture of Korea and its neighboring countries such as China and Japan during the period from the prehistoric age to the 19th cen-tury. The research was made by documents analysis. The results are summerised as follows : (1) A man has a basic instinct to beautify himself. There was not a significant difference between the make-up behavior of men and women in its primal stage. It was by the start of farming and the division of labor that made the make-up behavior as a feminine culture. The difference of sexual role caused the con-ceptual difference between manly beauty and womanly beauty. It was very natural for women to regard the make-up as the best way for showing their feminine beauty. In Korea, China and Japan, there were vari-ous kinds of primal actions such as tattooing, body-painting, and tooth make-up which were used in the purpose of body protection, incantation, ornament, and so on. Ass their ornamental purpose was becoming more important, these primal actions became the basis of the feminine make-up culture. Nowadays make-up, having mental and emo-tional function, is helpful to increasing self-satisfaction, promoting good personal relation-ship, and attracting attention from the other sex. It also has other functions of showing social status, wealth, age, sex, courage, power, and so on. (2) The representative make-up product used widely in the three countries was Boon (powder) which decides the overall color of face. The key point in the production of Boon was to increase its power of adsorption. The invention of Yunboon (power mixed with lead) solved this major problem of Boon. Yeonji which decides the color of cheek was the mixture of Boon and the powder of Honghwa (a kind of red-colored flower or tree). Mimook (eyebrow pencil) was developed to match up with the various and changing currencies of penciling eyebrows in each nation and times, Yeonji and Joosa (red sand) were used as Jinji (lip stick). The predominant color of Jinji was red. As miscellaneous methods of partial make-up, there were Kon-ji used in a wedding cer-emony in korea, Aek-hwang, Hwa-jeon, Sa-hong, and Myun-yup in China, and Chi-heuk, a peculial method of partial make-up in japan. (3) There were various factors which decided the characteristics of make-up culture usually reflects international atmosphere, the form of government, economic situation, re-ligious and social ideology, aesthetic sense, symbolizing meanings of colors, and so on. The up and down of an influentian country was one of the major factors which decided the characteristics of the make-up culture of its neighboring countries. When a country took a liberal form of government, it had diverse and splendid tendencies in its make-up culture. The better a nation's economic situation is, the more abandant and various its make-up culture is, and sometimes, the more eccentric and decadents it was. In the field of make-up production, the three countries had their own characteristics. But, as a whole, China was the leading nation who spread the culture and products of make-up to Korea and Japan. Though the Chinese make-up culture and products were usually spread to Japan through Korean, there was some evidence of direct exchanges between China and Japan through its dispatches of Kyun-Tang-Sa(Japanese delegation to the Tang Dynasty). While religion had a positive influence on the development of make-up culture by introducing new methods of make-up, Confucianism exercised strict control over the make-up cul-ture. The currencies in arts and changes of esthetic sense introduced new methods and booms to the make-up culture. Literature made people pay increasing attentions to the countenances of women and changed the standards of esthetic sense. We can find out that the social status of woman was also reflected in the make-up culture. As the social status of women became higher, the feminine make-up culture also developed more then ever. As mentioned above, the make-up cultures of the three countries reflected their social values, esthetic senses, and emotional feelings. Through their cultural exchanges, the three countries could develop various make-up products and methods.

  • PDF

상온에서의 용매 처리를 통한 저등급 석탄의 표면물성 및 자연발화 특성 변화 (Surface Characteristics and Spontaneous Combustibility of Coal Treated with Non-polar Solvent under Room Temperature)

  • 조완택;최호경;김상도;유지호;전동혁;임영준;임정환;이시훈
    • Korean Chemical Engineering Research
    • /
    • 제51권5호
    • /
    • pp.609-614
    • /
    • 2013
  • 본 연구에서는 유기용매를 이용하여 표면처리한 저등급 석탄의 물성과 자연발화성 변화를 알아보았다. 석탄은 인도네시아 갈탄인 KBB탄과 SM탄 그리고 아역청탄인 Roto탄을 사용하였으며, 비극성 유기용매인 1-methyl naphthalene (1 MN)과 혼합한 후 단순 회전 임펠러 또는 초음파를 이용하여 일정 시간동안 교반하였다. 1MN 처리탄의 물성 변화는 공업 분석, 발열량 분석, FT-IR 분석, XPS 분석, 그리고 수분 재흡착 실험을 통해 알아보았으며, 자연 발화성 변화는 Crossing-Point Temperature 분석과, 산화에 의해 발생되는 CO, $CO_2$ 가스 분석을 통해 확인하였다. FT-IR 분석 결과 처리탄들의 수소와 산소를 포함한 결합기들이 줄었다. XPS분석 결과 원탄들에 비해 처리탄들의 C-O, C=O 그리고 COO- 피크는 감소하고 C-C 피크는 상대적으로 증가하였다. 그리고 수분 재흡착성 측정 결과 처리탄들 표면의 소수성이 증가함을 확인하였다. CPT 측정 결과 원탄들에 비해 처리탄들의 CPT 값이 $20^{\circ}C$ 이상 증가하였는데, 단순 기계적 교반보다 초음파 교반 방식으로 처리한 석탄의 CPT 값이 높았다. 이때 배출되는 가스의 분석에서도 처리탄들이 원탄들에 비해 CO와 $CO_2$ 가스 발생량이 적고 발생 시점이 늦어져 자연발화성이 억제되는 것으로 나타났다. 이는 석탄을 유기용매로 처리함으로써 미리 산화반응에 참여하는 표면의 기능기들이 제거되어 자연발화성이 억제되는 것이며, 이에 단순 기계적 교반 방식보다는 초음파 교반 방식이 보다 효과적임을 확인하였다.

액상 TCE 제거반응을 위한 $CoO_x/TiO_2$ 촉매 (Heterogeneous Oxidation of Liquid-phase TCE over $CoO_x/TiO_2$ Catalysts)

  • 김문현;추광호
    • 대한환경공학회지
    • /
    • 제27권3호
    • /
    • pp.253-261
    • /
    • 2005
  • 불균일 $CoO_x/TiO_2$ 촉매가 충진된 연속 흐름식 고정층 반응기 내에서 ppm 수준으로 수중에 존재하는 trichloroethylene (TCE) 제거반응을 수행하였으며, 가장 우수한 반응활성을 갖는 촉매의 결정구조와 표면화학적 특성을 분석함으로써 반응시간에 따라 분해활성이 전이영역을 보이는 원인을 규명하고자 하였다. $36^{\circ}C$의 반응온도에서 모델반응의 내부확산저항은 없었으며, $TiO_2$ 표면에 흡착에 의한 액상 TCE 제거정도는 무시할 수 있었다. 5% $CoO_x/TiO_2$ 촉매는 본 대상반응에 대하여 가장 우수한 활성을 갖는 것으로 나타났으며, 반응시간의 경과정도에 따라 TCE 분해효율이 점진적으로 증가하여 안정화되는 전이영역의 존재를 확인할 수 있었다. 반응 전 5% $CoO_x$ 촉매에 대한 XRD 패턴에서 담지체로 사용된 $TiO_2$에 의한 피크들 외에 새로운 피크가 관찰되었고, 5시간 이상 동안 반응한 후에 건조된 촉매의 경우에도 반응 전 촉매의 XRD 피크와 매우 유사하였다. $Co_3O_4$의 XRD 패턴들과 대조한 결과, 5% $CoO_x$ 촉매상에서 Co 화합물에 의해 야기되는 XRD 피크들은 $Co_3O_4$에 의한 것임을 알 수 있었다. 반응물에 노출되지 않은 5% $CoO_x/TiO_2$ 촉매에 대한 XPS 측정은 797.1 eV에서 Co $2p_{1/2}$에 대한 주피크와 함께 781.3 eV에서 Co $2p_{3/2}$에 대한 주피크가 관찰되어졌다. 반응 후 촉매의 경우에는 Co $2p_{3/2}$ 및 Co $2p_{1/2}$의 binding energy들은 각각 780.3과 795.8 eV에서 나타났다. 반응 전 후 촉매상에서 Co $2p_{3/2}$의 binding energy 차이는 1.0 eV이고, Co $2p_{1/2}$의 binding energy 차이는 1.3 eV이다. 표준 $Co_3O_4$에 대한 XPS 측정결과, 반응 후 촉매상에 존재하는 $CoO_x$$Co_3O_4$로 존재하고, 반응 전의 경우에는 이와는 다른 chemical state를 보여주었다. XRD 및 XPS 결과를 바탕으로, 촉매표면에 존재하는 $Co_3O_4$의 외부표면이 $Co_2TiO_4$$CoTiO_3$ 같은 $CoTiO_x$로 encapsulation되어 있는 모델구조를 제안할 수 있고, 이는 반응시간의 함수로 나타나는 촉매활성에 있어서 전이영역의 존재를 잘 설명할 수 있을 뿐만 아니라, XRD와 XPS에서 얻어진 촉매의 물리화학적인 특성을 잘 반영할 수 있다.

함황철석 안산암 내 단층 비지의 광물학적 및 지구화학적 연구 (Mineralogy and Geochemistry of Fault Gouge in Pyrite-rich Andesite)

  • 박승환;김영규
    • 한국광물학회지
    • /
    • 제27권4호
    • /
    • pp.301-310
    • /
    • 2014
  • 황철석이 다량 존재하는 지역에서 산성암석배수에 의한 중금속 거동과 관련된 단층비지의 역할을 알아보기 위해, 양산지역에 분포하는 함황철석 안산암의 모암과 단층비지에 대하여 XRD, pH, XRF, SEM-EDS, ICP 분석을 실시하였다. 연구결과 모암의 주 구성광물로 석영(quartz), 엽랍석(pyrophyllite), 황철석(pyrite), 일라이트(illite), 황옥(topaz)이 관찰되었고 짙은 갈색의 단층비지 시료의 경우 석영(quartz), 일라이트(illite), 녹니석(chlorite), 스멕타이트(smectite), 침철석(goethite), 카콕세나이트(cacoxenite)가 동정되었으며 침철석이 주 구성광물이었다. 모암에서 동정된 광물 종으로 보아 모암은 열수 변질 작용을 많이 받은 것으로 보인다. ICP분석 결과 각 시료의 중금속 농도는 모암의 경우 Zn > As > Cu > Pb > Cr > Ni > Cd 순을 보였으며, 단층비지의 경우 As > Zn > Pb > Cr > Cu > Ni > Cd 순으로 나타났다. 두 시료를 비교해 보면 중금속의 총량은 전체적으로 단층비지에서 상대적으로 더 높은 값을 나타내며 특히 Pb, As, Cr은 2배 이상의 큰 차이를 보인다. 이러한 차이는 단층비지의 주 구성광물인 침철석의 높은 반응성과 넓은 표면적에 의해 Pb, As, Cr과 같은 중금속들이 공침 혹은 흡착되어 특히 높은 농도를 나타내며 또한 황철석의 산화에 의한 낮은 pH에 의하여 이러한 효과가 더욱 증가되었다고 사료된다. 그리고 자연환경에 쉽게 영향을 줄 수 있는 labile (step 1)과 acid-soluble (step 2)을 합한 농도의 비율은 대부분의 중금속이 모암에서 더 높게 나타나는 것을 확인하였다. 결과적으로 연구지역에서 단층비지는 모암에 비하여 많은 양의 중금속을 함유하고 연속추출법 단계 중 상대적으로 자연에 쉽게 유출될 수 있는 단계의 비율이 낮은 것으로 나타나 산성암석배수에 의한 피해가 예상되는 지역에서 단층비지는 중금속이 쉽게 용출되지 않게 하는 저장소로 큰 역할을 하는 것으로 판단된다.

명봉광산의 광미 내 비소의 고정화 특성 연구 (Characterization of Arsenic Immobilization in the Myungbong Mine Tailing)

  • 이우춘;정종옥;김주용;김순오
    • 자원환경지질
    • /
    • 제43권2호
    • /
    • pp.137-148
    • /
    • 2010
  • 백악기 불국사화강암 내 열극을 충진한 함금은석영맥으로 구성된 명보광산은 전남 보성군에 위치한 광산이다. 본 연구에서는 명봉광산의 광미를 채취하여 광미 내 황화광물 풍화와 이차 삼차 광물 생성 또는 변질 등의 다양한 과정들이 비소의 고정화에 어떠한 영향을 미치는지 살펴보았다. 광물학적 화학적 방법으로 나누어 연구를 수행하였으며, 광물학적 방법으로는 비중/자력 선별, 초음파 서}척, 기기분석(X-선 회절 분석기, 에너지 분산분광기, 전자탐침미세현미경) 등이 이용되었다. 그리고 왕수분해법을 적용하여 광미 내 원소함량을 알아보았다. 연구결과, 광미의 풍화로 형성된 철 (산)수산화물은 충진, 침전, 변질 등의 3가지 형태로 존재하는 것으로 확인되었다. 즉, 황철석의 가장자리와 균열부를 충진하는 형태, 맥석광물을 피복하여 침전된 형태 그리고 유코나이트로 변질된 형태 등이었다. 초기 다량의 산-발생 광물인 황철석과 유비철석의 풍화로 인해 산화반응이 빠르게 일어나면서 많은 철 (산)수산화물과 스코로다이트 등이 이차적으로 생성되는 것이 인지되었다. 이와 더불어 산화 환경에 대한 노출기간이 길어지고 산-발생 광물이 소모되면서 광미 내 pH 감소속도는 점차적으로 줄어들게 될 뿐만 아니라 주변 모암 내 함유된 방해석과의 중화반응이 더 크게 기여함으로써 광미의 pH는 증가한 것으로 생각된다. 이러한 광미 내 pH의 상승으로 인하여 이차적으로 생성된 스코로다이트의 안정도가 감소하면서 비소가 재용출 되어진다. 또한 방해석과 스코로다이트로부터 용출된 칼슘이온과 비소이온이 국부적으로 농집되면서 삼차적으로 유코나이트로 성장하게 되고, 이러한 비산염광물의 일종인 유코나이트는 비소의 함량이 높은 광물로서 비소를 고정화시키는데 크게 기여한 것으로 판단된다. 뿐만 아니라 광미의 주요한 일차광물인 황철석이 풍화되면서 생성된 다량의 철 (산)수산화물은 비소의 거동에 대하여 제어능력이 큰 것으로 인지되었다. 결론적으로 본 연구는 이러한 일련의 과정에 통하여 일차적으로 용출되거나 이차적으로 재용출된 비소는 흡착, 공침, 흡수 등과 같은 다양한 수착 반응들로 인해 고정화됨을 확인하였다.

금속산화물 담지촉매상에서 연속 습식 TCE 분해반응 (Continuous Wet Oxidation of TCE over Supported Metal Oxide Catalysts)

  • 김문현;추광호
    • Korean Chemical Engineering Research
    • /
    • 제43권2호
    • /
    • pp.206-214
    • /
    • 2005
  • $TiO_2$에 담지된 불균일 촉매상에서 ppm 수준으로 존재하는 수중 유기오염물질들을 제거하기 위한 모델반응으로 액상 trichloroethylene(TCE) 분해반응을 선정하였으며, 여러 반응변수의 동시제어가 가능하도록 디자인된 연속 흐름식 고정층 반응기 내에서 incipient wetness 기법으로 제조된 여러 전이금속 산화물 촉매들의 TCE 분해활성을 조사하였다. 선택된 반응조건에서 모델반응의 내부확산저항은 없었으며, $36^{\circ}C$의 반응온도에서 촉매표면에 흡착에 의한 액상 TCE 제거된 정도는 무시할 만하였고 촉매반응에 의해서만 제거될 수 있었다. TCE 제거반응에 대한 촉매들의 활성 및 반응시간에 따른 분해효율의 의존성은 사용된 금속 산화물 및 담지체의 종류에 따라 달라지는 것으로 나타났다. 5 wt.% $CoO_x$/$TiO_2$ 촉매는 본 대상반응에 대하여 가장 우수한 활성을 갖는 것으로 나타났으며, 반응시간의 경과 정도에 따라 TCE 분해효율이 점진적으로 증가하여 안정되는 전이구간의 존재를 확인할 수 있었다. 이와 같은 촉매활성의 반응시간 의존성은 반응 초기와 일정시간 경과 후의 $TiO_2$ 표면에 존재하는 $CoO_x$의 표면구조가 상이할 뿐만 아니라 반응시간 경과와 함께 활성이 더욱 높은 Co species의 표면노출을 암시하고 있다. $NiO_x$, $CrO_x$와 같은 금속 산화물 촉매들의 반응활성은 매우 낮은 수준이었다. $TiO_2$와 MFI를 담지체로 하여 각각 incipient wetness법과 이온교환법으로 제조된 $CuO_x/TiO_2$, Cu-MFI, $FeO_x/TiO_2$ 및 Fe-MFI의 TCE 제거효율을 반응시간의 함수로 살펴본 결과, Cu 촉매들에서 관찰되는 반응시간-분해효율 거동과는 다른 현상이 $FeO_x/TiO_2$와 Fe-MFI 촉매상에서 관찰되었다. $36^{\circ}C$의 반응온도에서 전반응시간 동안에 5 wt.% $FeO_x/TiO_2$ 촉매상에서 TCE 제거반응은 일어나지 않았으나, 1.2 wt.% Fe-MFI의 경우 반응 초기에 높은 제거율을 일정시간 동안 유지하다가 서서히 감소하는 비활성화 현상이 발생하였다. 이는 동일한 활성성분이 사용된다 할지라도 그 제조방법에 따라 촉매활성이 달라질 수 있음을 보여주고 있으며, 액상반응 중에 일어나는 활성성분의 redox cycle이 중요한 역할을 할 수 있음을 암시하고 있다. 가장 우수한 $CoO_x/TiO_2$ 촉매의 TCE 분해활성에 미치는 $CoO_x$ 담지량, 반응온도 등의 영향을 조사한 결과, 최적의 $CoO_x$ 담지량이 존재하였고 반응온도가 높을수록 TCE 제거효율은 높게 나타났다. 반응 중에 $CoO_x$ leaching에 의한 $CoO_x$의 손실이 확인되었으나 TCE 전환율에 영향을 미칠 정도는 아닌 것으로 판단되었다.