• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 봄 학술발표회 논문집
• /
• pp.203-208
• /
• 1994

These tests were conducted to get a device high strength concrete products in factory using admixtures for high strength concrete. The superplasticzer was used to compensate low slump of base concrete keeping its slump up about $6\pm1cm$. To examine the property for strength revelation of concrete using admixtures for high strength concrete, steam and standard curing were compared each other. Test results show that admixtures for high strength concrete is effective in steam curing and compressive strength 500kgf/$\textrm{cm}^2$ is obtained at one day, 650kgf/$\textrm{cm}^2$ at 28days as added to concrete at the ratio of 10-15%, and 740kgf/$\textrm{cm}^2$ at the ratio of 30%. Therefore admixtures for high strength concrete is effective in steam curing and make it possible to get high strength concrete using only steam curing not using autoclave curing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.117-120
• /
• 2004

Up to now, many researches have been performed md verified that many properties of concrete can be improved by using mineral admixtures such as blast furnace slag, silica fume, and expansive admixture. But it is not clear whether there is any need for entraining air to make a high strength concrete using expansive admixture and mineral admixtures to insure enough freeze-thaw resistance. this paper presents the strength and durability properties of high strength concrete using expasive admixtures and industrial by-products. It was observed from the test results that very high strength concrete$(W/B=20\%)$ is not needed to be air entrained and high strength concrete$(W/B=30\%)$ using expansive admixture and mineral admixtures is needed to be entrained $2\~4\%$ air.

• 콘크리트학회지
• /
• 제7권2호
• /
• pp.155-164
• /
• 1995

본 연구는 증기양생을 실시하는공장제품을 대상으로 석고계 고강도콘크리트용 혼화재를 사용하여 콘크리트를 고강도화하는데 그 목적이 있다. 목표 슬럼프는 원심력 성형제품을 대상으로 슬럼프 $6{\pm}1cm$가 되도록 고성능감수제로 조절하였으며, 아울러 양생방법에 다른 고강도콘크리트용 혼화재를 사용한 콘크리트의 강도발현 특성을 검토하고자 증기 및 수중양생을 실시 비교하였다. 실험결로부터 고강도 콘크리트용 혼화재는 증기양생이 효과적이며 압축강도 발현은 단위결합재량 $530{\sim}600kg/m^3$의 조건에서 10%치환으로 무치환에 비하여 1.3배 증가된 $650kgf/cm^2$ 이상, 15-30% 치환시 1.4-1.5배 증가된 $700kgf/cm^2$이상을 얻었다. 따라서 고강도콘크리트용 혼화재는 증기양생시의 고강도콘크리트 제조에 효과적으로, 시멘트2차제품 제조에 오오토클레브 양생을 하지 않고 증기양생만으로 고강도콘크리트를 얻을 수 있는 유효한 혼화재임을 나타냈다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.83-88
• /
• 1998

II-anhydrite, slag, and fly ash produced as industrial by-product were reutilized for the manufacture of high strength admixtures for cement and concrete. The effects of these admixtures on the compressive strength of cement mortar and concrete were examined with those of domestic admixture. At the condition mortar and concrete. Especially, adding of II-anhydrite was very effective for the increasing of compressive strength. Therefore it is possible that these admixture as a high strength admixture apply to cement and concrete.

• Advances in concrete construction
• /
• 제1권2호
• /
• pp.151-162
• /
• 2013

The performance characteristics of high-strength and high-performance concrete are discussed in this review. Recent developments in the field of high-performance concrete marked a giant step forward in high-tech construction materials with enhanced durability, high compressive strength and high modulus of elasticity particularly for industrial applications. There is a growing awareness that specifications requiring high compressive strength make sense only when there are specific strength design advantages. HPC today employs blended cements that include silica fume, fly ash and ground granulated blast-furnace slag. In typical formulations, these cementitious materials can exceed 25% of the total cement by weight. Silica fume contributes to strength and durability; and fly ash and slag cement to better finish, decreased permeability, and increased resistance to chemical attack. The influences of various mineral admixtures such as fly ash, silica fume, micro silica, slag etc. on the performance of high-strength concrete are discussed.

• 한국건축시공학회지
• /
• 제9권2호
• /
• pp.85-91
• /
• 2009

W/C and unit volume, which significantly affect quality of concrete related to strength and durability, are regulated at below $185kg/m^3$ for regular concrete generally used in standard specification for constructions. The aim of this research is to develop chemical admixture and find out its potential use by identifying characteristics of admixtures added to soft concrete and hardening concrete, of which content ratio of component for each type of admixtures is subject to change in accordance with unit volume within KS' allowable range. Sodium gluconate, polyoxyethylene nonylphenyl ether, poly carboxylic copolymer in slump, which is characteristic of soft concrete, are deemed highly sensitive while there is no air entrainment except for $10\sim70%$ in WE, WR component content ratio and NP. In hardening concrete, strength in general showed higher action in compressive strength and tensile strength than in plain strength. Use of proper AE agent and AE water reducing agent at the same time is deemed to be used as chemical admixtures capable of manufacturing high-quality, high-quantity concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.79-88
• /
• 1993

The purpose of this study is to provide a firm base for the quality improvement of high strength concrete and the development of ultra high strength concrete as well as enviromental con-servation and utilization of byproducts from industrial processing such as Fly ash and Silica fume. A comprehensive experimental study was performed to investigate the effects on the quality improvement of high strength concrete using mineral admixtures. As results, 400~500kg/$\textrm{cm}^2$ compressive strength and excellent flowability can be obtained if fly ash is replaced with cement in the range of 305. In case of using powder type silica fume, 600~700 kg/$\textrm{cm}^2$ compressive strength is showed and 600~800kg/$\textrm{cm}^2$ compressive strength cam be obtained with liquid type silica fume. But it is necessary to increase dosage of high range water reducer for flowability using powder type silica fume. Especially, higher strength concrete cam be obtained when maximum size of coarse aggregate is lower than 25mm.

• Computers and Concrete
• /
• 제32권2호
• /
• pp.185-206
• /
• 2023

This article aimed to explore the optimization of mineral admixtures and retarding admixture for high-performance concrete. In essence, fresh concrete can be regarded as a mixture in which both coarse and fine aggregates are suspended in a cement-based matrix paste. Based on this view, the test procedure was divided into three progressive stages of binder paste, mortar, and concrete to explore their rheological behavior and mechanical properties respectively. At each stage, there were four experimental control factors, and each factor had three levels. In order to reduce the workload of the experiment, the Taguchi method with an L9(3⁴) orthogonal array and four controllable three-level factors was adopted. The test results show that the use of the Taguchi method effectively optimized the composition of high-performance concrete. The slump of the prepared concrete was above 18 cm, and the slump flow was above 50 cm, indicating that it had good workability. On the other hand, the 28-day compressive strength of the hardened concretes was between 31.3-59.8 MPa. Furthermore, the analysis of variance (ANOVA) results showed that the most significant factor affecting the initial setting time of the fresh concretes was the retarder dosage, and its contribution percentage was 62.66%. On the other hand, the ANOVA results show that the most significant factor affecting the 28-day compressive strength of the hardened concretes was the water to binder ratio, and its contribution percentage was 79.05%.

• 대한토목학회논문집
• /
• 제14권4호
• /
• pp.783-794
• /
• 1994

근래에 들어 대형 구조물의 시공실패사례가 보고되고 있어 이에 대한 개선이 시급하게 요청되고 있다. 이러한 실패사례의 주요원인은 콘크리트의 품질문제이며 따라서 고품질 콘크리트의 개발과 사용이 절실히 필요하다. 콘크리트의 품질향상을 위한 방안으로 현재 주목받고 있는 것은 유동성의 확보와 함께 각기 다른 독특한 특성을 보이는, 플라이 애쉬, 고로 슬래그, 실리카 흄 등 혼화재의 혼입이다. 따라서, 본 연구에서는 슬럼프를 $17{\pm}1cm$로 제어하여 기본적인 유동성을 확보한 콘크리트 배합에 대하여, 위의 혼화재들의 혼입률에 따른 역학적 특성과 내구적 특성을 고찰하여 보았다. 본 연구에서 고려한 주요 실험변수들로는 혼화재의 종류와 혼입률, 두 종류의 단위시멘트량과 물/시멘트비의 조합 등이다. 이들 실험변수들을 고려하여 14개 시리즈에 대한 포괄적인 실험을 수행하였으며, 각 혼화재 혼입량에 따른 재령별 압축강도 증진양상과 콘크리트내에 매립된 철근씩 부삭특성을 분석, 고찰하였다. 본 실험연구로부터 각 경우별 최적의 혼화재 혼입량과 성능을 도출하였으며 이것은 앞으로 고성능 콘크리트의 활용에 토대가 될 것으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.709-712
• /
• 2006

It is necessary to develop a new technology for controling thermal cracking by hydration heat according to the increase construction of massive concrete structures, high strength concrete and early strength concrete. Therefore, it was investigated the characteristics of hydration heat generation of low heat concrete using hydration heat reducing admixtures in this study. To investigate the performance of hydration heat reducing admixtures, it was evaluated hydration heat according to the kind and replacement ratio of phase change material series I, II and the way of using hydration heat reducing admixtures in series III.