A Study on Physical Properties of Concrete using Admixtures for High Strength Concrete

고강도콘크리트용 혼화재를 사용한 콘크리트의 물성에 관한 연구

This study was performed to get high strength of the precase concrete adopting a steam curing by using a gypsum-admixture for the high strength concrete. The superplasticizer was used to compensate low slump of base concrete keeping its slump up about $6{\pm}1cm$. To examine the property for strength revelation of concrete using admixtures for a high strength concrete, steam and standard curing were compared each other. Test results were shown that admixtures for high strength concrete were more effective in steam curing than standard curing. On the condition that the unit cement content is about $530{\sim}600kg/m^3$, the compressive strength of concrete replacing by 10% of the admixture was obtained over $65Okgf/cm^2$, which was increased as 1.3 times as that for the nonreplacement. When the admixture was replaced to 15-30%, the compressive strengh was obtained over $700kgf/cm^2$ which was increased as 1.4 - 1.5 times. Therefore, the admixture for high strength concrete, being effective in steam curing, was more efficient to get a high strength concrete using only steam curing instead of an autoclave curing for the secondary products of cement.

본 연구는 증기양생을 실시하는공장제품을 대상으로 석고계 고강도콘크리트용 혼화재를 사용하여 콘크리트를 고강도화하는데 그 목적이 있다. 목표 슬럼프는 원심력 성형제품을 대상으로 슬럼프 $6{\pm}1cm$가 되도록 고성능감수제로 조절하였으며, 아울러 양생방법에 다른 고강도콘크리트용 혼화재를 사용한 콘크리트의 강도발현 특성을 검토하고자 증기 및 수중양생을 실시 비교하였다. 실험결로부터 고강도 콘크리트용 혼화재는 증기양생이 효과적이며 압축강도 발현은 단위결합재량 $530{\sim}600kg/m^3$의 조건에서 10%치환으로 무치환에 비하여 1.3배 증가된 $650kgf/cm^2$ 이상, 15-30% 치환시 1.4-1.5배 증가된 $700kgf/cm^2$이상을 얻었다. 따라서 고강도콘크리트용 혼화재는 증기양생시의 고강도콘크리트 제조에 효과적으로, 시멘트2차제품 제조에 오오토클레브 양생을 하지 않고 증기양생만으로 고강도콘크리트를 얻을 수 있는 유효한 혼화재임을 나타냈다.