• 제목/요약/키워드: adjusting coefficient

검색결과 145건 처리시간 0.036초

온 칩 수정발진기를 위한 CMOS 온도 제어회로 (A CMOS Temperature Control Circuit for Direct Mounting of Quartz Crystal on a PLL Chip)

  • 박철영
    • 한국산업정보학회논문지
    • /
    • 제12권2호
    • /
    • pp.79-84
    • /
    • 2007
  • 본 논문에서는 CMOS를 이용한 온도 제어회로를 MOSIS의 0.25um-3.3V CMOS 설계규칙에 따라 설계하고 SPICE 시뮬레이션과 실험을 통하여 성능을 검토하였다. 설계된 회로는 $0^{\circ}C{\sim}150^{\circ}C$의 온도 범위에 대하여 출력 전압이 약 $13mV/^{\circ}C$로 변화하며 좋은 온도 선형성을 나타내었다. 또한, 바이어스 전압을 변화시키면 온도변화에 대한 출력전압의 변화량을 조정할 수 있다. 제안된 회로는 온 칩 수정발진회로의 설계 등에 유용하게 사용될 수 있을 것으로 기대된다.

  • PDF

2차원 각주의 공력특성 능동제어에 관한 수치해석 연구 (Numerical Study on the Active Control of Aerodynamic Properties of 2 - D Square Prism)

  • 이영호;김춘식;조대환
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제17권1호
    • /
    • pp.33-44
    • /
    • 1993
  • Active control of a flow field is essential to design efficient parts or elements relating to fluid machineries. The present study is aimed to suggest a new discretization technique of the convection term by renewing the non-conservative equation found in SOLA-VOF into a conservative one. And, as an application, flow characteristics are investigated by adjusting the backward ejecting velocity of 2-D square prism to control the aerodynamic properties. Strouhal number, drag and lift coefficient are compared in terms of various ejecting velocity. Among the results, the transient weak fluctuation of the lift and drag coefficient when the ejecting velocity equals channel inlet velocity is remarkably noticed.

  • PDF

드로우비드 성형시 박판재 마찰계수 영향인자 해석 (Analysis on Parameters Affecting the Friction Coefficient in Drawbead Forming of Sheet Metal)

  • 김원태;이동활;서만석;문영훈
    • 소성∙가공
    • /
    • 제14권8호통권80호
    • /
    • pp.668-674
    • /
    • 2005
  • In sheet metal forming, drawbeads are often used to control uneven material flow which may cause deffets such as wrinkles, fractures, surface distortion and springback. Appropriate setting and adjusting of the drawbead force is one of the most important parameters in sheet forming process control. Therefore in this study, drawbead friction test with circular shape bead was performed at various sheets, lubricants(dry, three kinds of lubricants having different viscosities), bead materials and surface treatments of bead surface. The results obtained by drawbead friction test show that the friction and drawing characteristics of deforming panels were mainly influenced by strength of sheet, viscosity of lubricant and hardness of bead surface.

동결기 자유수면 지하수의 모관상승량을 고려한 DAWAST 모형 (DAWAST Model Considering the Phreatic Evaporation in the Frozen Region)

  • 김태철;박철동
    • 한국농공학회지
    • /
    • 제43권2호
    • /
    • pp.78-84
    • /
    • 2001
  • The daily streamflow in the Yaluhe watershed located in the north-eastern part of China was simulated by DAWAST model and the water balance parameters of the model were calibrated by simplex method. Model verification tests were carried out. The range of root mean square error was 0.34∼1.50mm, that of percent error in volume was -16.9∼-62.0% and that of correlation coefficient was 0.727∼0.920. DAWAST model was revised to consider the phreatic evaporation from the ground water in the frozen soil by adjusting soil moisture content in the unsaturated layer at the end of the melting season. The results of estimation of the daily streamflow by the revised model were statistically improved, that is, the range of root mean square error was 0.31∼1.49mm, that of percent error in volume was -11.7∼-12.1%, and that of correlation coefficient was 0.810∼0.932. The accuracy of DAWAST model was improved and the applicability of DAWAST model was expanded to the frozen region.

  • PDF

Control of secondary electron emission coefficient with microstructural change of polycrystalline MgO films

  • Yu, Hak-Ki;Lee, Jong-Lam;Park, Eung-Chul;Kim, Jae-Sung;Ryu, Jae-Hwa
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.1445-1447
    • /
    • 2008
  • Micro crystal structure of polycrystalline MgO film is controlled by adjusting the energy of particles arrived at the substrate during deposition. The change of crystal structure affects on the total area of (200) surface where the oxygen vacancies are formed easily, resulting in the change of secondary electron emission (SEE) coefficient($\gamma$).

  • PDF

정보시스템 Chargeback에 있어서의 효율성과 공평성의 관계 (Efficiency and Fairness in Information System Chargeback)

  • 유영진;안중호
    • Asia pacific journal of information systems
    • /
    • 제1권1호
    • /
    • pp.117-145
    • /
    • 1991
  • IS changeback is regarded as an offective way to control the usage of computers and communication systems which are very much limited resources and whose costs are very high, In this paper, the problem of combining the optimal chargeback system which guarantees the efficiency with the Rawls'(1971) concept of fairness. Primary conclusion of this paper is that if the value function which represents the contributions of IS user to the firm's profit is evidit and there is no uncertainty about this contribution information, optimality can be achived without any loss of fairness using full cost allocation pricing. But if there is no significant differences among contribution of each user and there is no significant differences among users because of the managerial arbitrariness, From this point of view contingent chargeback system with which manager can find the golden middle between optimality and fairness by adjusting the 'efficiency coefficient' according to his/her organizational characterisics and environments is proposed. A heuristic of finding the appropriate efficiency coefficient is also suggested.

  • PDF

Study of Equivalent Retention among Different Polymer-Solvent Systems is Thermal Field-Flow Fractionation

  • 김원숙;박영훈;문명희;유유경;이대운
    • Bulletin of the Korean Chemical Society
    • /
    • 제19권8호
    • /
    • pp.868-874
    • /
    • 1998
  • An equivalent retention has been experimentally observed in thermal field-flow fractionation (ThFFF) for different polymer-solvent systems. It is shown that iso-retention between two sets of polymer-solvent systems can be obtained by adjusting the temperature difference (ΔT) according to the difference in the ratio of ordinary diffusion coefficient to thermal diffusion coefficient. This method uses a compensation of field strength (ΔT) in ThFFF at a fixed condition of cold wall temperature. It is applied for the calculation of molecular weight of polymers based on a calibration run of different standards obtained at an adjusted AT. The polymer standards used in this study are polystyrene (PS), polymethylmethacrylate (PMMA), and polytetrahydrofuran (PTHF). Three carrier solvents, tetrahydrofuran (THF), methylethylketone (MEK) and ethylacetate (ETAc) were employed. Though the accuracy in the calculation of molecular weight is dependent on the difference in the slope of log λ vs. log M which is related to Mark-Houwink constant a, it shows reasonable agreement within about 6% of relative error in molecular weight calculation for the polymer-solvent systems having similar a value.

강우 유출사상을 통한 Clark 모형의 매개변수 평가 (Estimation of the Parameters for the Clark Model through the Rainfall-Runoff Events)

  • 안태진;백천우;김민혁;최광훈;강인웅
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2006년도 학술발표회 논문집
    • /
    • pp.770-774
    • /
    • 2006
  • The determination of feasible design flood is the most important to control flood damage in river management. Model parameters should be calibrated using observed discharge but due to deficiency of observed data the parameters have been adopted by engineer's empirical sense. Storage coefficient in the Clark unit hydrograph method mainly affects magnitude of peak flood. This study is to estimate the storage coefficients based on the observed rainfall-runoff events at the four stage stations in the Hantan river basin. Model calibration is the process of adjusting model parameter values until model results match historical data. An objective function which is the percent difference between the observed and computed peak flows is available for measuring the goodness-of-fit between computed and observed hydrographs. By sensitivity analysis for the storage coefficient, it has been shown that the storage coefficients affect the peak flows. The Clark parameters adopted in the River Rectification Basic Plan have been estimated through an iterative process designed to produce a hydrograph with the peak flow.

  • PDF

사상체질(四象體質)의 유전성(遺傳性) 검토(檢討)에 대한 통계적(統計的) 연구(硏究) (Statistical Study on Heredity in SaSang Constitutional Medicine)

  • 김대윤;이재원;김달래
    • 사상체질의학회지
    • /
    • 제11권1호
    • /
    • pp.159-168
    • /
    • 1999
  • Purpose : Sasang Constitutional Medicine explains the pathology peculiar to constitution and suggests treatment for each constitution. In Sasang Constitutional Medicine hwnan beings are classified on four groups; Taeyangin, Taeumin, 5oyangin, Soeumin. These four constitution has their's own symptoms and treatments. In treatment, control of mind inclination, that is to say, moderation takes a very important role. But the study on heredity in Sasang Constitutional Medicine has not done not biological study but also statistical study. So we used several statistical methods and analyzed 163 samples. Methods : We implemented Fishers exact test for adjusting chi-squared test, kappa coefficient to estimate agreement of parent's and children's constitutions, and finally plotted bi-plot using correspondence analysis. Results : From Fisher's exact test result, we could know that parent's and children'S constitution's distribution had significant difference. In kappa coefficient, mother and daughter's estimated value produced highest result. In correspondence analysis we only plotted the case of mother and son for easy interpretation. Conclusion : In the study of heredity of SaSang constitution, we cannot know exactly the heredity of constitution in terms of biology or genetics. But this research can be helpful for further analysis, that is, a study of biological or genetical aspects. And we could conclude that in statistical aspects the heredity in SaSang constitution is meaningful.

  • PDF

Boussinesq 파랑전파모델에서 스펀지층을 이용한 반사경계의 모의 (Simulation of Reflective Boundaries Using the Sponge Layer in Boussinesq Wave Propagation Model)

  • 전인식
    • 한국해안해양공학회지
    • /
    • 제19권5호
    • /
    • pp.429-435
    • /
    • 2007
  • 비선형 Boussinesq 파랑전파 모델에서 방파제, 호안 등의 반사 경계면에 스펀지층을 설치하여 반사율을 모의하는 방법을 제안하였다. 스펀지층의 반사특성을 도출하기 위하여 상대 스펀지폭(스펀지층 폭/입사파장)을 변화시키는 일차원 수치실험을 수행하였다. 실험결과, 상대 스펀지폭을 조정함으로써 무반사에서 완전반사까지 반사율을 효과적으로 구현할 수 있음을 보였으며, 실험결과에 근거하여 반사율과 관련 무차원 변수들간의 다중회귀분석식을 제시하였다. 마지막으로, 본 스펀지층을 이차원 방파제에 적용하였으며, 스펀지층이 반사경계로서 평면 이차원 조건에서도 충분히 효과적으로 사용될 수 있음을 예시하였다.