• 접착 및 계면
• /
• 제21권1호
• /
• pp.27-33
• /
• 2020

유리섬유강화 복합재료 (GFRC)의 표면거칠기에 따른 에폭시 접착제의 접착강도를 평가하였고 최적의 표면거칠기를 선정하였다. 서로 다른 입자크기의 알루미나 (Al2O3) 입자를 GFRC의 표면에 분사하였고 이를 통하여 서로 다른 표면거칠기를 부여하였다. 표면거칠기를 정량화 하였고 표면거칠기에 따른 표면관찰을 진행하였다. 각 표면거칠기에 따른 접촉각을 측정하였고 이를 통하여 표면에너지를 계산하였으며, 에폭시 접착제와의 접착일을 계산 및 비교하여 접착력을 예측하였다. 단일랩전단 시험을 통해 접착강도를 평가하였고 거칠기에 따라 접착강도가 증가된다는 것을 확인하였다. 박리 후 표면을 관찰해 보았을 때 기지재인 GFRC의 박리 정도가 다른 것을 확인하였고 최종적으로 표면거칠기의 최적조건을 확인할 수 있었다.

• 한국표면공학회지
• /
• 제27권1호
• /
• pp.19-28
• /
• 1994

A study on adhesion property of evaporated Al-Cr films was conducted on steel sheet by using two-source evaporator. Adhesion of Al-Cr coated steel was evaluated by tape test after $180^{\circ}$bending. Adhesion was decreased with increasing the Cr content in Al-Cr films. It was thought that the decrease in adhesion with increasing Cr content be related to insufficient wetting and diffusion of Cr atoms in the film. Best adhesion was achieved in the case of pure aluminum film..

• 한국재료학회지
• /
• 제13권5호
• /
• pp.338-342
• /
• 2003

Adhesion between Cu and low-k films has been investigated. Low-k films deposited using a mixture of hexamethyldisilane(HMDS) and Para-xylene had a dielectric constant as low as 2.7, showing the thermally stable properties up to $400^{\circ}C$. In this study, Ti glue layer, boron dopant, and $N_2$plasma treatment were used to improve adhesion property of between Cu and low-k films. Ti glue layer slightly improved adhesion property. After $N_2$plasma treatment, the adhesion property was significantly improved due to the increased roughness and the formation of new binding states between Ti and plasma-treated PPpX : HMDS. However, $300^{\circ}C$ annealing of $N_2$plasma treated sample caused the diffusion of Cu into the PPpX : HMDS, degrading the low-k properties. In the case of Cu(B)/Ti/PPpX : HMDS, the adhesion was remarkably increased. This enhanced adhesion was attributed to formation of Ti-boride at the Cu-Ti interface. It is because the formed Ti-boride prevented the diffusion of Cu into the PPpX : HMDS and the Cu-Ti reaction at the Ti interface.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.1-4
• /
• 2005

This study is to examine adhesion the characteristics of self adhesive asphalt to minimize of the construction periods and the environmental problems through the performance estimation of materials to reduce waterproof problem and the long durability maintenance of building structures. This study tested the estimation items of self rubberized adhesive asphalt to examine the sheet discovered the most important problem in the construction site and the connection stability in the sheet joint. Besides, this study examined the material characteristics such as tension property, tear property, temperature dependence, heat resistance, adhesion stability and so on. Test results of the separative items satisfied in the reference figure of connection stability and adhesion stability which could confirm adhesion performances and other items also satisfied in the reference.

• Journal of Electrochemical Science and Technology
• /
• 제9권4호
• /
• pp.330-338
• /
• 2018

The adhesion strength as well as the electrochemical properties of $LiNi_{0.4}Mn_{0.4}Co_{0.2}O_2$ electrodes containing various conductive carbons (CC) such as fiber-like carbon, vapor-grown carbon fiber, carbon nanotubes, particle-like carbon, Super P, and Ketjen black is compared. The morphological properties is investigated using scanning electron microscope to reveal the interaction between the different CC and the active material. The surface and interfacial cutting analysis system is also used to measure the adhesion strength between the aluminum current collector and the composite film, and the adhesion strength between the active material and the CC of the electrodes. The results obtained from the measured adhesion strength points to the fact that the structure and the particle size of CC additives have tremendous influence on the binding property of the composite electrodes, and this in turn affects the electrochemical property of the configured electrodes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.940-944
• /
• 2003

With the increasing demand for plastic micro components, micro-/nano-molding using the mother stamper has received much attention. If the replication temperature is too high, the adhesion between the stamper and the polymer melt may deteriorate the surface quality of the replicated part, excessively wearing down the stamper. In this paper, an experimental method analyzes the temperature dependency of the anti-adhesion property between the actual stamper with patterns of sub-micrometer and the polymer melt. As a practical example, a correlation between the contact angle of the stamper and the surface quality of the molded substrates as a function of the replication temperature, respectively, was obtained quantitatively.

• 접착 및 계면
• /
• 제21권2호
• /
• pp.65-70
• /
• 2020

각각의 다른 복합재료를 연결하는 데 주로 에폭시 접착제가 사용되고 있다. 에폭시 접착제 대표적인 열경화성 수지로서 에폭시와 경화제의 경화 반응을 통해 선형구조에서 3차원의 망상 구조로 변하게 되어 접착을 한다. 경화제의 종류에 따라 비율 및 경화 조건 등이 변하며, 이러한 조건에 따라 물성이 달라진다. 접착공정이 대형화 됨에 따라 접착제를 바르고 즉시 접착하지 못하기 때문에, 대기시간동안 습도 및 온도 등 외부환경에 영향을 받아 접착제의 접착력 저하로 이어지게 된다. 본 논문에서는 유리섬유강화 복합재료에 에폭시 접착제를 사용하여 접착하였고, 단일 랩 전단 시험을 통하여 가사시간에 따른 에폭시 접착제의 접착강도를 평가하였다. 가사시간에 따른 접착력 변화를 확인하기 위하여, 복합재료에 에폭시 접착제를 바르고 상온에서 각 시간에 따라 대기한 후 접착하였다. 단일 랩 전단 강도를 통하여 일정시간 이상 가사시간을 오래 둘 수록 접착강도가 감소한다는 것을 확인하였다. 습도조건에 따른 접착력 변화를 확인하기 위하여, 경화습도 조건을 항온항습기로 조절하여 경화 시켰고, 습도조건에 따른 접착 강도를 단일 랩 전단 시험을 통해 접착력을 평가하였다. 적은 양의 수분은 에폭시 접착제의 경화 반응을 가속시켜 접착 강도를 증가시켰으나, 일정 이상의 과도한 수분은 오히려 접착강도를 감소시킴을 확인하였다.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• 제5권5호
• /
• pp.583-591
• /
• 2018

Tool-chip adhesion impacts on cutting performance significantly, especially in finish cutting process. To promote cutting tools' anti-adhesion property, the concave micro-grooves texture (MGT) and convex volcano-like texture (VLT) were fabricated separately on lathe tools' rake faces by laser surface texturing (LST). Various orientations of MGT and different area densities (9% and 48%) and regions (partial and full) of VLT were considered in textured patterns designing. The following orthogonal cutting experiments, machining of aluminum alloy 5038, analyzed tools' performances including cutting force, cutting stability, chip shape, rake face adhesion and abrasion. It indicated that under dry finish cutting conditions, MGT contributed to cutting stability and low cutting forces, meanwhile friction and normal force reduced by around 15% and 10%, respectively with a weak correlation to the grooves' orientation. High density VLT tools, on the other hand, presented an obvious anti-adhesion property. A $5{\mu}m$ reduction of crater wear's depth can be observed on textured rake faces after long length cutting and textured rake faces presented half size of BUE regions comparing to the flat tool, however, once the texture morphologies were filled or worn, the anti-adhesion effect could be invalid. The bearing ratio curve was employed to analysis tool-chip contact and durability of textured surfaces contributing to a better understanding of anti-adhesion and enhanced durability of the textured tools.

• 접착 및 계면
• /
• 제12권1호
• /
• pp.26-33
• /
• 2011

폴리케톤 필름의 산처리 조건에 따른 필름 표면의 화학적인 변화를 접촉각과 XPS를 이용하여 분석하고, 모폴로지의 변화를 SEM과 AFM을 통하여 살펴보고, 최종적으로 이러한 변화가 폴리케톤 필름과 고무와의 계면접착력에 어떠한 영향을 미치는지를 살펴보았다. 인산처리에 의하여 폴리케톤 필름의 표면에 젖음성이 증가하여 인산의 농도 및 처리시간에 따라서 접촉각이 감소하였으며, 표면에 산소함유기들이 증가하는 결과를 보였다. 인산농도와 처리시간이 증가함에 따라 표면에 crack과 etching이 증가하여 표면거칠기가 증가하였으나, 산처리 조건이 강화되면서 폴리케톤 필름의 표면에 degradation이 발생하여 roughness가 감소하는 결과를 보였다. 폴리케톤과 고무와의 계면접착력을 살펴본 결과, pH 0.74에서 120 min, pH 0.4에서 60 min 처리한 경우에 최대 계면접착력을 보였으며, 산처리 조건이 그 이상으로 증가하면서 degradation이 발생하면서 계면접착력이 감소하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제34권2호
• /
• pp.58-67
• /
• 2006

The relationship between acoustic property and coating hardness of musical instruments was investigated using a sound level meter and a pendulum hardness tester. Urethane topcoat, oil stain, natural oil varnish, and UV-curable epoxy acrylate coatings were applied on four different substrates: Paulownia coreana, Pinus koraiensis, Castanea crenata var. dulcis and Pinus densiflora. The influence of the coating type on the acoustic properties was stronger than that of the substrate. In the case of an oil stain formed with tacky coating layer, the sound pressure level (SPL) and surface hardness decreased with increasing of coating thickness. In the other coatings, SPL decreased and hardness increased as the coating layer thickened. However, SPL began to increase again at coating thickness above $100{\mu}m$.