International Journal of Precision Engineering and Manufacturing-Green Technology

  • 제5권5호
  • /
  • Pages.583-591
  • /
  • 2018
  • /
  • 2288-6206(pISSN)
  • /
  • 2198-0810(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

Experimental Investigation of Concave and Convex Micro-Textures for Improving Anti-Adhesion Property of Cutting Tool in Dry Finish Cutting

  • Kang, Zhengyang (School of Mechanical Engineering, Jiangsu University) ;
  • Fu, Yonghong (School of Mechanical Engineering, Jiangsu University) ;
  • Chen, Yun (Chengdu Tools Research Institute Co., Ltd.) ;
  • Ji, Jinghu (School of Mechanical Engineering, Jiangsu University) ;
  • Fu, Hao (School of Mechanical Engineering, Jiangsu University) ;
  • Wang, Shulin (School of Mechanical Engineering, Jiangsu University) ;
  • Li, Rui (School of Mechanical Engineering, Jiangsu University)
  • 투고 : 2016.12.21
  • 심사 : 2018.02.17
  • 발행 : 2018.10.01
⟨ 이전 논문 다음 논문 ⟩

초록

Tool-chip adhesion impacts on cutting performance significantly, especially in finish cutting process. To promote cutting tools' anti-adhesion property, the concave micro-grooves texture (MGT) and convex volcano-like texture (VLT) were fabricated separately on lathe tools' rake faces by laser surface texturing (LST). Various orientations of MGT and different area densities (9% and 48%) and regions (partial and full) of VLT were considered in textured patterns designing. The following orthogonal cutting experiments, machining of aluminum alloy 5038, analyzed tools' performances including cutting force, cutting stability, chip shape, rake face adhesion and abrasion. It indicated that under dry finish cutting conditions, MGT contributed to cutting stability and low cutting forces, meanwhile friction and normal force reduced by around 15% and 10%, respectively with a weak correlation to the grooves' orientation. High density VLT tools, on the other hand, presented an obvious anti-adhesion property. A $5{\mu}m$ reduction of crater wear's depth can be observed on textured rake faces after long length cutting and textured rake faces presented half size of BUE regions comparing to the flat tool, however, once the texture morphologies were filled or worn, the anti-adhesion effect could be invalid. The bearing ratio curve was employed to analysis tool-chip contact and durability of textured surfaces contributing to a better understanding of anti-adhesion and enhanced durability of the textured tools.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Bhowmick, S. and Alpas, A. T., "Minimum Quantity Lubrication Drilling of Aluminium-Silicon Alloys in Water Using Diamond- Like Carbon Coated Drills," International Journal of Machine Tools and Manufacture, Vol. 48, Nos. 12-13, pp. 1429-1443, 2008. https://doi.org/10.1016/j.ijmachtools.2008.04.010
  2. Shahabi, H. and Ratnam, M., "In-Cycle Detection of Built-Up Edge (BUE) from 2-D Images of Cutting Tools Using Machine Vision," The International Journal of Advanced Manufacturing Technology, Vol. 46, Nos. 9-12, pp. 1179-1189, 2010. https://doi.org/10.1007/s00170-009-2180-y
  3. Bandyopadhyay, B., "Mechanism of Formation of Built-Up Edge," Precision Engineering, Vol. 6, No. 3, pp. 148-151, 1984. https://doi.org/10.1016/0141-6359(84)90115-6
  4. Byrne, G., Dornfeld, D., and Denkena, B., "Advancing Cutting Technology," CIRP Annals-Manufacturing Technology, Vol. 52, No. 2, pp. 483-507, 2003. https://doi.org/10.1016/S0007-8506(07)60200-5
  5. Fukui, H., Okida, J., Omori, N., Moriguchi, H., and Tsuda, K., "Cutting Performance of DLC Coated Tools in Dry Machining Aluminum Alloys," Surface and Coatings Technology, Vol. 187, No. 1, pp. 70-76, 2004. https://doi.org/10.1016/j.surfcoat.2004.01.014
  6. Yoshimura, H., Toda, Y., Moriwaki, T., Shibasaka, T., and Okida, J., "Study on Near Dry Cutting of Aluminum Alloys," Machining Science and Technology, Vol. 10, No. 3, pp. 289-299, 2006. https://doi.org/10.1080/10910340600902108
  7. Enomoto, T. and Sugihara, T., "Improving Anti-Adhesive Properties of Cutting Tool Surfaces by Nano-/Micro-Textures," CIRP Annals, Vol. 59, No. 1, pp. 597-600, 2010. https://doi.org/10.1016/j.cirp.2010.03.130
  8. Oishi, K., "Built-Up Edge Elimination in Mirror Cutting of Hardened Steel," Journal of Engineering for Industry, Vol. 117, No. 1, pp. 62-66, 1995. https://doi.org/10.1115/1.2803279
  9. Rahim, E. and Sasahara, H., "A Study of the Effect of Palm Oil as MQL Lubricant on High Speed Drilling of Titanium Alloys," Tribology International, Vol. 44, No. 3, pp. 309-317, 2011. https://doi.org/10.1016/j.triboint.2010.10.032
  10. Kummel, J., Gibmeier, J., Muller, E., Schneider, R., Schulze, V., et al., "Detailed Analysis of Microstructure of Intentionally Formed Built-Up Edges for Improving Wear Behaviour in Dry Metal Cutting process of Steel," Wear, Vol. 311, Nos. 1-2, pp. 21-30, 2014. https://doi.org/10.1016/j.wear.2013.12.012
  11. Kumar, A. S., Durai, A. R., and Sornakumar, T., "Wear Behaviour of Alumina Based Ceramic Cutting Tools on Machining Steels," Tribology International, Vol. 39, No. 3, pp. 191-197, 2006. https://doi.org/10.1016/j.triboint.2005.01.021
  12. Kiyota, H., Itoigawa, F., Endo, S., and Nakamura, T., "Analytical Approach for Optimization of Chamfered Cutting Tool Preparation Considering Built-Up Edge Extrusion Behavior," International Journal of Automotive Technology, Vol. 7, No. 3, pp. 329-336, 2013.
  13. Atlati, S., Haddag, B., Nouari, M., and Moufki, A., "Effect of the Local Friction and Contact Nature on the Built-Up Edge Formation Process in Machining Ductile Metals," Tribology International, Vol. 90, pp. 217-227, 2015. https://doi.org/10.1016/j.triboint.2015.04.024
  14. Merklein, M., Andreas, K., and Steiner, J., "Influence of Tool Surface on Tribological Conditions in Conventional and Dry Sheet Metal Forming," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 2, No. 2, pp. 131-137, 2015. https://doi.org/10.1007/s40684-015-0017-8
  15. Etsion, I., "State of the Art in Laser Surface Texturing," Journal of Tribology, Vol. 127, No. 1, pp. 248-253, 2005. https://doi.org/10.1115/1.1828070
  16. Jiang, X. J. and Whitehouse, D. J., "Technological Shifts in Surface Metrology," CIRP Annals-Manufacturing Technology, Vol. 61, No. 2, pp. 815-836, 2012. https://doi.org/10.1016/j.cirp.2012.05.009
  17. Fatima, A. and Mativenga, P. T., "Assessment of Tool Rake Surface Structure Geometry for Enhanced Contact Phenomena," The International Journal of Advanced Manufacturing Technology, Vol. 69, Nos. 1-4, pp. 771-776, 2013. https://doi.org/10.1007/s00170-013-5079-6
  18. Chang, W., Sun, J., Luo, X., Ritchie, J. M., and Mack, C., "Investigation of Microstructured Milling Tool for Deferring Tool Wear," Wear, Vol. 271, Nos. 9-10, pp. 2433-2437, 2011. https://doi.org/10.1016/j.wear.2010.12.026
  19. Kawasegi, N., Sugimori, H., Morimoto, H., Morita, N., and Hori, I., "Development of Cutting Tools with Microscale and Nanoscale Textures to Improve Frictional Behavior," Precision Engineering, Vol. 33, No. 3, pp. 248-254, 2009. https://doi.org/10.1016/j.precisioneng.2008.07.005
  20. Wei, Y., Kim, M.-R., Lee, D.-W., Park, C., and Park, S. S., "Effects of Micro Textured Sapphire Tool Regarding Cutting Forces in Turning Operations," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 4, No. 2, pp. 141-147, 2017. https://doi.org/10.1007/s40684-017-0017-y
  21. Sugihara, T. and Enomoto, T., "Improving Anti-Adhesion in Aluminum Alloy Cutting by Micro Stripe Texture," Precision Engineering, Vol. 36, No. 2, pp. 229-237, 2012. https://doi.org/10.1016/j.precisioneng.2011.10.002
  22. Kummel, J., Braun, D., Gibmeier, J., Schneider, J., Greiner, C., et al., "Study on Micro Texturing of Uncoated Cemented Carbide Cutting Tools for Wear Improvement and Built-Up Edge Stabilisation," Journal of Materials Processing Technology, Vol. 215, pp. 62-70, 2015. https://doi.org/10.1016/j.jmatprotec.2014.07.032
  23. Bhushan, B. and Jung, Y. C., "Natural and Biomimetic Artificial Surfaces for Superhydrophobicity, Self-Cleaning, Low Adhesion, and Drag Reduction," Progress in Materials Science, Vol. 56, No. 1, pp. 1-108, 2011. https://doi.org/10.1016/j.pmatsci.2010.04.003
  24. Parker, A. R. and Lawrence, C. R., "Water Capture by a Desert Beetle," Nature, Vol. 414, No. 6859, pp. 33-34, 2001. https://doi.org/10.1038/35102108
  25. Lee, S. H., Lee, J. H., Park, C. W., Lee, C. Y., Kim, K., et al., "Continuous Fabrication of Bio-Inspired Water Collecting Surface via Roll-Type Photolithography," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 1, No. 2, pp. 119-124, 2014. https://doi.org/10.1007/s40684-014-0016-1
  26. Ridgway, S. H. and Carder, D. A., "Features of Dolphin Skin with Potential Hydrodynamic Importance," IEEE Engineering in Medicine and Biology Magazine, Vol. 12, No. 3, pp. 83-88, 1993. https://doi.org/10.1109/51.232347
  27. Ma, J., Duong, N. H., and Lei, S., "Numerical Investigation of the Performance of Microbump Textured Cutting Tool in Dry Machining of AISI 1045 Steel," Journal of Manufacturing Processes, Vol. 19, pp. 194-204, 2015. https://doi.org/10.1016/j.jmapro.2014.10.001
  28. Kim, D. M., Lee, I., Kim, S. K., Kim, B. H., and Park, H. W., "Influence of a Micropatterned Insert on Characteristics of the Tool- Workpiece Interface in a Hard Turning Process," Journal of Materials Processing Technology, Vol. 229, pp. 160-171, 2016. https://doi.org/10.1016/j.jmatprotec.2015.09.018
  29. Kang, Z., Fu, Y., Ji, J., and Tian, L., "Numerical Investigation of Microtexture Cutting Tool on Hydrodynamic Lubrication," Journal of Tribology, Vol. 139, No. 5, Paper No. 054502, 2017. https://doi.org/10.1115/1.4035506
  30. Chu, W.-S., Kim, C.-S., Lee, H.-T., Choi, J.-O., Park, J.-I., et al., "Hybrid Manufacturing in Micro/Nano Scale: A Review," International Journal of Precision Engineering and Manufacturing- Green Technology, Vol. 1, No. 1, pp. 75-92, 2014. https://doi.org/10.1007/s40684-014-0012-5
  31. Kim, M., Lee, S. M., Lee, S. J., Kim, Y. W., and Lee, D. W., "Effect on Friction Reduction of Micro/Nano Hierarchical Patterns on Sapphire Wafers," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 4, No. 1, pp. 27-35, 2017. https://doi.org/10.1007/s40684-017-0004-3
  32. Du, D., He, Y., Sui, B., Xiong, L., and Zhang, H., "Laser Texturing of Rollers by Pulsed Nd:YAG Laser," Journal of Materials Processing Technology, Vol. 161, No. 3, pp. 456-461, 2005. https://doi.org/10.1016/j.jmatprotec.2004.07.083
  33. Inogamov, N. A., Zhakhovsky, V. V., Khokhlov, V. A., Petrov, Y. V., and Migdal, K. P., "Solitary Nanostructures Produced by Ultrashort Laser Pulse," Nanoscale Research Letters, Vol. 11, No. 1, pp. 1-13, 2016. https://doi.org/10.1186/s11671-015-1209-4
  34. Dai, D. and Gu, D., "Influence of Thermodynamics within Molten Pool on Migration and Distribution State of Reinforcement during Selective Laser Melting of $AlN/AlSi_{10}Mg$ Composites," International Journal of Machine Tools and Manufacture, Vol. 100, pp. 14-24, 2016. https://doi.org/10.1016/j.ijmachtools.2015.10.004
  35. Xie, J., Luo, M.-J., He, J.-L., Liu, X.-R., and Tan, T.-W., "Micro- Grinding of Micro-Groove Array on Tool Rake Surface for Dry Cutting of Titanium Alloy," International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 10, pp. 1845-1852, 2012. https://doi.org/10.1007/s12541-012-0242-9
  36. Obikawa, T., Kamio, A., Takaoka, H., and Osada, A., "Micro- Texture at the Coated Tool Face for High Performance Cutting," International Journal of Machine Tools and Manufacture, Vol. 51, No. 12, pp. 966-972, 2011. https://doi.org/10.1016/j.ijmachtools.2011.08.013
  37. Kang, Z., Fu, Y., Ji, J., and Wang, H., "Characterisation of Group Behaviour Surface Texturing with Multi-Layers Fitting Method," Nondestructive Testing and Evaluation, Vol. 31, No. 3, pp. 235-246, 2016. https://doi.org/10.1080/10589759.2015.1093629
  38. Davim, J. P., "Surface Integrity in Machining," Springer, 2010.
  39. Xing, Y., Deng, J., Feng, X., and Yu, S., "Effect of Laser Surface Texturing on $Si_3N_4/TiC$ Ceramic Sliding Against Steel under Dry Friction," Materials & Design, Vol. 52, No. 24, pp. 234-245, 2013. https://doi.org/10.1016/j.matdes.2013.05.077
  40. Kim, S. S. and Lee, H. G., "Tribological Behaviors of Carbon Composite Grooved Surfaces," Composite Structures, Vol. 71, No. 2, pp. 238-245, 2005. https://doi.org/10.1016/j.compstruct.2004.10.005
  41. Enomoto, T., Sugihara, T., Yukinaga, S., Hirose, K., and Satake, U., "Highly Wear-Resistant Cutting Tools with Textured Surfaces in Steel Cutting," CIRP Annals-Manufacturing Technology, Vol. 61, No. 1, pp. 571-574, 2012. https://doi.org/10.1016/j.cirp.2012.03.123
  42. Zhang, Y., Wang, X., Li, H., and Wang, B., "Adhesive Behavior of Micro/Nano-Textured Surfaces," Applied Surface Science, Vol. 329, pp. 174-183, 2015. https://doi.org/10.1016/j.apsusc.2014.12.040
  43. Petropoulos, G., Torrance, A., and Pandazaras, C., "Abbott Curves Characteristics of Turned Surfaces," International Journal of Machine Tools and Manufacture, Vol. 43, No. 3, pp. 237-243, 2003. https://doi.org/10.1016/S0890-6955(02)00240-7

피인용 문헌

  1. A Study on the Optimal Machining Parameters of the Induction Assisted Milling with Inconel 718 vol.12, pp.2, 2018, https://doi.org/10.3390/ma12020233
  2. Effect of novel hybrid texture tool on turning process performance in MQL machining of Inconel 718 superalloy vol.35, pp.1, 2020, https://doi.org/10.1080/10426914.2019.1697444
  3. Tribological Performance of Micro-Groove Tools of Improving Tool Wear Resistance in Turning AISI 304 Process vol.13, pp.5, 2020, https://doi.org/10.3390/ma13051236
  4. Surface Micro-texturing by Hot Sintering for Advanced Bearing Polymers for Friction Reduction Under Boundary Lubrication vol.21, pp.6, 2020, https://doi.org/10.1007/s12541-019-00274-y
  5. Study on tribological properties of surface concave convex micro-texture on the mold steel vol.72, pp.10, 2018, https://doi.org/10.1108/ilt-03-2020-0081
  6. Investigation on turning process performance using hybrid-textured tools under dry and conventional cooling environment vol.35, pp.16, 2018, https://doi.org/10.1080/10426914.2020.1813893
  7. 3D printing-assisted fabrication of microgrid patterns for flexible antiadhesive polymer surfaces vol.23, pp.None, 2018, https://doi.org/10.1016/j.surfin.2021.100935
  8. Machinability of Inconel 718: A critical review on the impact of cutting temperatures vol.36, pp.7, 2018, https://doi.org/10.1080/10426914.2020.1843671
  9. Effect of surface line/regular hexagonal texture on tribological performance of cemented carbide tool for machining Ti-6Al-4V alloys vol.116, pp.9, 2018, https://doi.org/10.1007/s00170-021-07636-9