• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.1-11
• /
• 2002

This study was conducted to investigate the effects of reaction pH conditions and hardener types on the reactivity, chemical structure and adhesion performance of UF resins. Three different reaction pH conditions, such as traditional alkaline-acid (7.5 → 4.5), weak acid (4.5), and strong acid (1.0), were used to synthesize UF resins which were cured by adding three different hardeners (ammonium chloride, ammonium citrate, and zinc nitrate) to measure adhesion strength. Fourier transform infrared (FT-IR) and carbon-13 nuclear magnetic resonance (¹³C-NMR) spectroscopies were employed to study chemical structure of the resin prepared under three different reaction pH conditions. Adhesion strength of the resins cured with three different hardeners was determined with lap shear specimens in tension. The gel time of UF resins decreased with an increasing in the amount of both ammonium chloride and ammonium citrate added in the resins. However, the gel time increased for zinc nitrate. Both FT-IR and ¹³C-NMR spectroscopies showed that the strong reaction pH condition produce uronic structures in UF resin, while both alkaline-acid and weak acid conditions produce quite similar chemical species in the resins. The maximum adhesion strength was occurred with the resin prepared under strong acid pH condition. However, this study indicated that the weak acid reaction condition provide a balance between increasing resin reactivity and improving adhesion strength of UF resin. The measurement of formaldehyde emission from the panels bonded with the UF resins prepared is planned for future work.

• Journal of Adhesion and Interface
• /
• v.23 no.4
• /
• pp.137-143
• /
• 2022

In this study, the polyurethane acrylates (PUA) resin with good adhesive and flexibility for adhesive for shoes and clothing were synthesized using that poly(tetramethylene adiphate glycol) (PTAd), poly(tetramethylene ether glycol) (PTMG) as polyester polyol and polyether polyol respectively, including 4,4'-methylene diphenyl diisocyanate (MDI), isophorone diisocyanate (IPDI), 1,4-butandiol (1,4-BD), 2-hydroxyethyl methacrylate (2-HEMA) and dibutyl amine (DBA). The effect of polyol blend in the polyurethane acrylate on thermal and mechanical properties, adhesion strength and flexural strength were studied. The glass transition temperature (T_g) of PUA was confirmed in range of -70~-40 ℃. In addition, the glass transition temperature (T_g), decomposition temperature (T_d), tensile strength adhesion strength and heat resistance were increased as increasing of PTAd amount while the elongation, water resistance and flexural properties were decreased. The synthesized polyurethane acrylate with 5:5 ratio of PTAd and PTMG indicated the highest adhesion strength and flexural properties.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3B
• /
• pp.303-310
• /
• 2009

Natural zeolite is widely used as sorbents and bio-media materials because it is cheap as well as it has efficient porous structures and large cation exchange. In this study, the effect of metal cations $(Na^+,\;Ca^{2+},\;Mg^{2+},\;Al^{3+})$ adsorbed to natural zeolite on the microorganism attachment was investigated. Metal-modified zeolites (MMZ) were prepared with 0.01 M, 0.02 M and 0.1 M NaCl, $CaCl_2$, $MgCl_2$ and $AlCl_3$ solutions respectively, which concentrations were equivalent to 10%, 20% and 100% of cation exchange capacity (CEC) of natural zeolite. Pseudomonas putida was used as microorganism which was cultivated in Beef Extract Medium at $26^{\circ}C$. The microorganism attachment to MMZ was increased more than natural zeolite. The amount of bacterial adhesion to MMZ and natural zeolite were $Mg^{2+}>natural>Na^+>Al^{3+}>Ca^{2+}$ under 10% of CEC, $Mg^{2+}>Ca^{2+}>Al^{3+}>natural>Na^+$ under 20% of CEC and $Ca^{2+}>Mg^{2+}>natural>Al^{3+}>Na^+$ under 100% of CEC. Especially, Mg-modified zeolite (Mg-MZ) showed the highest amount of bacterial adhesion, which increased the microorganism attachment 60% higher than natural zeolite under 10% of CEC. However, the amount of bacterial adhesion was decreased as the concentration of metal cations modified to zeolite were increased, showing that the increased amounts were 60% under 10% of CEC, 50% under 20% of CEC and 10% under 100% of CEC in Mg-MZ. Additionally, the effect of $Mg^{2+}$ in solution on the bacterial adhesion was investigated in order to compare it with the effect of $Mg^{2+}$ adsorbed to zeolite. The maximum quantity of bacterial adhesion to Mg-MZ was not different from the amount of microorganism attachment to the natural zeolite when $Mg^{2+}$ solution was added.

• Corrosion Science and Technology
• /
• v.7 no.1
• /
• pp.50-60
• /
• 2008

The majority of the described experimental results deal with relatively pure aluminium. Variations were made in the pretreatment of the aluminum substrates and an investigation was performed on the resulting changes in oxide layer composition and chemistry. Subsequently, the bonding behavior of the surfaces was investigated by using model adhesion molecules. These molecules were chosen to represent the bonding functionality of an organic polymer. They were applied onto the pretreated surfaces as a monolayer and the bonding behavior was studied using infrared reflection absorption spectroscopy. A direct and clear relation was found between the hydroxyl fraction on the oxide surfaces and the amount of molecules that subsequently bonded to the surface. Moreover, it was found that most bonds between the oxide surface and organic functional groups are not stable in the presence of water. The best performance was obtained using molecules, which are capable of chemisorption with the oxide surface. Finally, it was found that freshly prepared relatively pure aluminum substrates, which are left in air, rapidly lose their bonding capacity towards organic functional groups. This can be attributed to the adsorption of contamination and water to the oxide surface. In addition the adhesion of a typical epoxy-coated aluminum system was investigated during exposure to water at different temperatures. The coating was found to quite rapidly lose its adhesion upon exposure to water. This rapid loss of adhesion corresponds well with the data where it was demonstrated that the studied epoxy coating only bonds through physisorptive hydrogen bonding, these bonds not being stable in the presence of water. After the initial loss the adhesion of the coating was however found to recover again and even exceeded the adhesion prior to exposure. The improvement could be ascribed to the growth of a thin oxyhydroxide layer on the aluminum substrate, which forms a new, water-stable and stronger bond with the epoxy coating. Two routes for improvement of adhesion are finally decribed including an interphasial polymeric thin layer and a treatment in boiling water of the substrate before coating takes place. The adhesion properties were finely also studied as a function of the Mg content of the alloys. It was shown that an enrichment of Mg in the oxide could take place when Mg containing alloys are heat-treated. It is expected that for these alloys the (hydr)oxide fraction also depends on the pre-treatment and on the distribution of magnesium as compared to the aluminium hydroxides, with a direct impact on adhesive properties.

• Korean Journal of Plant Resources
• /
• v.23 no.2
• /
• pp.145-150
• /
• 2010

To examine the antioxidative effect and melanogenesis of Nelumbo nucifera stamen (NNS) extract on hydrogen peroxide $H_2O_2$ induced cytotoxicity in cultured human skin melanoma cells (SK-MEL-3), cell adhesion activity (CAA), tyrosinase inhibitory activity and total amount of melanin synthesis were measured by colorimetric assay. In this study, $H_2O_2$ significantly decreased CAA, and $CAA_{50}$ value of $H_2O_2$ was determined at 30 uM. In the antioxidative effect, NNS extract increased cell adhesion activity which was decreased by $H_2O_2$ induced cytotoxicity, and also, tyrosinase activity and total amount of melanin were decreased by NNS extract. These results suggested that $H_2O_2$ was highly toxic on cultured human skin melanoma cells and NNS extract showed the antioxidative and inhibitory effect of melanogenesis by the increased CAA, and the decresed tyrosinase activity and total amount of melanin synthesis.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.2
• /
• pp.35-43
• /
• 1984

This study was carried out to investigate the block shear strength of the 2ply laminated wood composed of Pinus thunbergii with ureaformaldehyde resin as adhesives according to pressure (6, 9, 12, 15kg/$cm^2$), pressing time(5, 10, 20, 30 hrs.), amount of spread(54, 108, 217, 324g/$cm^2$), hardener(10, 20, 30, 40% of 10% $NH_4CL$ on resin) and extender(0, 5, 10, 15% wheat flour on resin), and the bending strength and bending young's modulus of laminated beam according to the number of ply. The results were summarized as follows; 1. According to pressing pressure with amount of spread 217g/$cm^2$ both dry and wet shear strength of laminated wood showed the highest in 15kg/$cm^2$, and hot-cold soaking treatment showed the highest in 9kg/$cm^2$, while all shear strength of dry, wet and hot-cold soaked laminated wood have been reduced with the increasing of pressing time. 2. According to amount of spread, adhesion strength with the dry, wet and hot-cold soaking treatments revealed the highest in 217g/$cm^2$ and have been reduced under or over 217g/$cm^2$ of spread. 3. According to addition of hardener and extender, all shear strength of laminated block with the dry, wet and hot-cold soaking treatments have been reduced in increasing of addition amount of hardener and extender. The bending strength of beam according to the number of ply showed the highest in 2ply laminated wood and horizontal loading beam to glue line had the higher in strength than the vertical loading.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.887-892
• /
• 2014

In a conventional magnetic abrasive polishing process, the polishing abrasives are mixed with ferrous particles and slight cutting oil to form a cluster of abrasives. However, when a tool rotates at a high revolution speed, most of the polishing abrasives are scattered away from it due to the increase in centrifugal force. This phenomenon directly reduces the polishing efficiency. The use of a highly viscous matter such as silicone gel instead of cutting oil for mixing is one method to solve this problem and increase abrasive adhesion. Another method to avoid high abrasive scattering is the application of wet magnetic abrasive polishing (WMAP). In WMAP, abundant mineral oil is preliminarily applied to the workpiece surface. This study experimentally evaluated the effect of WMAP on abrasive adhesion. The relationship between the amount of working abrasives and polishing conditions was characterized. Despite the lower adhesion ratio of polishing abrasives, the surface roughness was found to be significantly improved as the result of WMAP.

• Journal of Adhesion and Interface
• /
• v.19 no.1
• /
• pp.5-12
• /
• 2018

The purpose of this study is to evaluate the adhesive properties of polyurethane mixed aqueous dispersions by omitting the primer, dealing with the preparation of skins for synthetic leather with excellent adhesion by omitting the pre-treatment process. The two-component mixed polyurethane water dispersion was prepared by synthesizing an ester-based polyurethane resin (PU-T) and a carbonate-based polyurethane resin (PU-C) to obtain the final resin. As a result of measuring the peel strength of the adhesive specimens omitting the pre-treatment agent, it was confirmed that the state adhesive strength (ethylene vinyl acetate (middle): $4.2kg_f/cm$ and rubber (outsole): $4.4kg_f/cm$) there was. This makes it possible to omit the pre-treatment process which has been indispensably used in the shoe manufacturing process, thereby reducing the process time and reducing the amount of volatile organic compounds (VOCs) generated in the pre-treatment product, resulting in environmentally advantageous.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.300-306
• /
• 2002

To study the effect of polymer compositions on the cell adhesion, copolymers of 3-(S)-[(dodecyloxycarbonyl) methyl]-1,4-dioxane-2,5-dione (DMD) and L-lactide were made, where DMD was synthesized form L-malic acid (L-MA) and glycolic acid. Furthermore, the copolymerization of DMD and L-lactide was performed using tin(II) octanoate as a catalyst. As a result of fixing RGD on the copolymer films, the cell adhesive peptide was fixable on the surface of the film. It was found out that the amount of fixation of RGD also increases by the increase in the amount of MA unit introduction. Since it is gradually decomposed over a long period and neither remains nor accumulation occurs, glycolic acid-$\beta$-dodecylmalate -lactic acid (D-PGML) is greatly expected as a potential biomaterial with improved slow degradability.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.21-22
• /
• 2020

This study is about high strength self-leveling mortar according to the mixing ratio of polymer. The self-leveling mortar currently released in Korea maintains a compressive strength of 40 Mpa as of 28 days. In addition, the level of bonding strength and flexural strength are kept the same. However, through this study, it is confirmed how the self-leveling mortar with a compressive strength of 60Mpa as of the 28th is shown according to the amount of polymer mixed. Experimental factors were configured according to the amount of polymer mixed, and the types of experiments were to confirm compressive strength, flexural strength, adhesion strength and flow. In addition, by confirming the early strength, a study was conducted to improve the quick workability compared to the self-horizontal mortar in the market.