• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.8
• /
• pp.1211-1216
• /
• 1989

To enhance the breakdown properties of low voltage-oriented ZnO varistor, sample were fabricated with additive oxides and sintering conditions. Addition of TiO2 lowered breakdown voltage` nonlinear resistances were lowered about 10V/mm and nonlinear exponents were not lowered with respect to it with the basic composition. To the samples added TiO2, V2ko5, and Cr2O3, microstructures were observed by SEM, moreover Ti was detected at grainboundaries and within the grain by EDS. Addition of Si-oxides and Sb2O3 increased nonlinear exponent and also increased nonlinear resistance, by addition of TiO2 to these samples at the sintering conditions of 1250\ulcorner and 1 hour we could fabricate low voltage-oriented ZnO varistors with nonlinear exponent of 30 or more and with real breakdown voltage of 30V/mm.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.130-133
• /
• 1999

In the view point of further reducing the inter-symbol interferences studied in our previous paper 〔1〕, a quadrature pair of wavelet-based filter banks that are composed of a pair of cosine and sine modulated filter banks is applied to MC-CDMA transmultiplexing. For that fact, the symbol duration gets twice longer than the one in , 〔1〕, the interference effects due to channel overlapping and Doppler spread can be effectively alleviated while increasing the channel utilization efficiency. Moreover, the well-known wavelet properties are exploited to design the prototype filter in such a way to maintain the size of sidelobes much smaller than those of the FFT, the interference reduction effect can be further obtained. To verify the behavior of our proposed quadrature filter bank based MC-CDMA system, the reverse-link bit error rates with respect to SNR under Rayleigh fading and additive white Gaussian noise channel environments are computed. The results show an improved system performance over the conventional MC-CDMA.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.4
• /
• pp.277-289
• /
• 2003

This study proposes a mathematical model to characterize the removal of nitrogen oxides in a dielectric barrier discharge plasma process. As well as the reactions between nitrogen oxides, water vapor, oxygen and nitrogen, the model takes into account the effect of ethylene often used as a chemical additive to reduce the power consumption of the process on the removal of nitrogen oxides. Since the concentrations of the radicals concerned in the main reactions including O, OH, H and N should be calculated to predict the removal efficiency of nitrogen oxides, they were theoretically derived. The parameters affecting the removal of nitrogen oxides, such as initial concentration, discharge power, humidity, and ethylene concentration were experimentally evaluated, which were compared with the calculated results to verify the validity of the model proposed. The predicted concentrations of several byproducts formed in this process were also presented and discussed. The effects of several parameters mentioned above on the removal of nitrogen oxides were reasonable described by the proposed model.

• KSTLE International Journal
• /
• v.3 no.1
• /
• pp.26-29
• /
• 2002

The International Lubricant Standardization and Approval Committee (ILSAC) GF-3 passenger car engine oil specification has been introduced commercially in July 2001. The new specification oil provides superior performance in terms of fuel economy, control of high temperature deposits, and oil consumption. These enhanced performances of GF-3 engine oil need high quality base oil as well as a better additive system. In this paper, the effect of base oil on various performances of ILSAC GF-3 engine oil was investigated. From the GF-3 sequence engine tests, Group III base oil shows better performance in fuel economy retention, oxidation and varnish control than combination of group III and group II or group III and group 1.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.49-58
• /
• 1997

A study on the synthesis of zeolite from bituminous coal ESP fly ash as a raw material, which was emitted from the power plant, was carried out to reduce environmental problems and reuse of the industrial wastes. Bituminous coal fly ash was used as the source of silica and alumina. Zeolite was synthesized by hydrothermal reaction in aqueous NaOH solution with sodium aluminate as additive. The objective of this study is to elucidate the effect of several experimental variables on the synthesis of zeolite. The effects of preroasting temperature, mixing speed, leaching alkalinity, and molar ratio of Na$_{2}$O/SiO$_{2}$ and SiO$_{2}$/Al$_{2}$O of the products were investigated. The synthesized zeolite was proved to be NaA, which is known as 4A type, by comparing with SEM images, and X-ray diffraction analysis. And also we know that the transformation of zeolite A take places into other types of zeolites, i.e. Hydroxysodalite, zeolite P, with the variation of leaching alkalinity.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.390-393
• /
• 2002

Many researchers have studied for the barrier liner in the landfill that is mixed with clay mineral, native soils and solidified agent. However, they have a littel but problems for safety construction and maintenance as a bottom liner systems in the landfill. In this paper the authors studied the effects on hydraulic conductivity by electric-chemical ion-exchange agent that is a soil stabilization agent(Sulphonated Oil), The application of the soil stabilization agent to meet the hydraulic conductivity of clay liner in landfill is possible if the additive quantity and a proper reaction time is determined relevantly in the laboratory test.

• Journal of the Korean Ceramic Society
• /
• v.17 no.3
• /
• pp.133-140
• /
• 1980

Nonohmic properties of ZnO ceramics with various small amounts of additives were studied in relation to sintering temperature and additive content. The kinds of additives used were basic additives ($Bi_2O_3$, $BaCO_3$, $MnCO_3$, $Cr_2O_3$) and $KNO_3$ Especially this study has focused on the effects of $KNO_3$ in ZnO ceramics with basic additives. SEM studies indicated that microstructures of ZnO, $KNO_3$ and basic additives showed homogenuous grain size in comparison to ZnO and basic additives compounds. The nonohmic exponent ($\alpha$) in ZnO, $KNO_3$ and basic additives component were measured as high as 40.

• Journal of the Korean Ceramic Society
• /
• v.22 no.5
• /
• pp.35-42
• /
• 1985

$eta$-Sialon powders were prepared by reduction-nitridation from mixture of Wando pyrophyllite and graphite as a reducing agent at 135$0^{\circ}C$ in 80% $N_2$-20% $H_2$ atmosphere. As the reaction products $Si_2ON_2$, $\beta$-$Si_3N_4$ a--$Si_3N_4$ and $\beta$-SiC were observed. Additive agents of MgO, CaO, $Y_2O_3$ were used for promoting the reduction and nitridiation aeaction. The present study was conducted to investigate the effects of silica-carbon ratio ($SiO_2$/C=weight ratio), raction time gas flow rate pellet size and powder packing on synthesis of $\beta$-Sialon from Wando pyropyllite.

• Journal of electromagnetic engineering and science
• /
• v.7 no.4
• /
• pp.201-206
• /
• 2007

When the M-ary signal experiences the Rayleigh fading, the diversity schemes can reduce the effects of fading since the probability that all the signals components will fade simultaneously are reduced considerably. The symbol error probabilities for various M-ary signals, such as MDPSK, MPSK and MQAM, are mathematically derived for the SC-2(Selection Combining 2) demodulation system, whereby the two signals with the two largest amplitudes are coherently combined among the L branches. On the other hand, maximum ratio combining(MRC) requires the individual signals from each path to be time-aligned, cophased, optimally weighted by their own fading amplitude, and then summed. The propagation model used in this paper is the frequency-nonselective slow Rayleigh fading channel corrupted by the Additive White Gaussian Noise(AWGN). The numerical results presented in this paper are expected to provide information for the design of radio system using M-ary modulation method for above mentioned channel environment.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.345-347
• /
• 1995

ZnO varistor with composition of ZnO(90wt%)-$Bi_2O_3$(3wt%)-$Sb_2O_3$(3.61wt%)-$CO_2O_3$(1.16wt%)-NiO (0.88wt%)-$MnO_2$(0.71wt%)-$Cr_2O_3$(0.93wt%) according to $Al_2O_3$ addtive was fabricated by sintering methods. The optimal densification were established for the processing conditions of 8000 rpm 190$^{\circ}C$ spray drying and 1200$^{\circ}C$ 2hrs sintering. Then here investigated how additive compotions and processing variables affected the electrical and the phesical properties of these ZnO varistors.