• 한국음향학회지
• /
• 제40권5호
• /
• pp.503-514
• /
• 2021

신호에서의 잔향은 암묵음원분리 시스템의 성능을 크게 저하시키는 경향이 있다. 특히 온라인으로 진행되는 시스템일 때, 그 영향이 더욱 두드러진다. 최근 공동 행렬대각화를 활용하여 해당 문제를 해결하고자 하는 연구들이 이루어지고 있다. 본 논문에서는 이를 활용, 발전하여 잔향이 존재하는 환경에서의 미결정 다중 화자의 음원 분리 온라인 알고리즘에 잔향 제거 기능을 추가함으로써 분리한 음원의 품질을 개선하였다. WSJCAM0 데이터베이스에서 실험을 통해 기존에 사용되고 있는 온라인 알고리즘 성능과 비교하였다. 성능 평가는 신호 대 왜곡 비(Signal-to-Distortion Ratio, SDR)와 Perceptual Evaluation of Speech Quality(PESQ)를 통해 이루어졌고, 기존 알고리즘 대비 SDR은 평균 1.23 dB에서 3.76 dB로 향상되었고, PESQ는 1.15에서 2.12로 성능이 향상되었음을 검증하였다.

• 센서학회지
• /
• 제23권3호
• /
• pp.165-169
• /
• 2014

An existing infrared (IR) analysis system is generally composed of infrared source, IR focusing lenses, IR detector, and optical chopper. An optical chopper is widely used in combination with lock-in amplifier to improve the signal-to-noise ratio by periodically interrupting incident light beam. During recent years, a few researches on miniaturized optical chopper have been reported to apply to micro-scaled optical systems. In this paper, a micro optical chopper operated by electromagnetic actuation is proposed and applied to a miniaturized micro-scaled optical system operating in IR spectral range. Additionally, the fabrication method of the proposed micro chopper is demonstrated. The proposed micro optical chopper is composed of the polydimethylsiloxane (PDMS) membrane, solenoid, and permanent magnet. The permanent magnet is bonded on the PDMS membrane using an ultraviolet-activated adhesive. The operation of the chopper is based on the attractive and repulsive forces between permanent magnet and solenoid induced by an electrical current flowing through the solenoid. The fabricated micro optical chopper could operate up to 200 Hz of frequency. The maximum operating distance of the chopper with 7mm diameter membrane was $750{\mu}m$ at 100 Hz of frequency.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.59-63
• /
• 2011

Friction damping is one of the attractive vibration control technique for space structures due to its simplicity and large damping capacity. However, passive approaches for friction damping have a limitation because energy is no longer dissipated at sticking. In order to overcome this problem, semi-active control methods to adjust normal force at frictional interface have been studied in previous researches. In this paper, two semi-active friction control method is compared by simulating SDOF model of truss structure. The first approach is on-off control to maximize rate of energy dissipation, whereas the second concept is variable friction force control to minimize amplitude ratio for each half period. The maximum friction force, control variable in on-off control method, is obtained to minimize 1% settling time, and is different from optimal friction force in passive control. Simulation results show that performance of on-off control is better than that of variable friction force control in terms of settling time and controlled friction force.

• 한국군사과학기술학회지
• /
• 제15권5호
• /
• pp.687-698
• /
• 2012

LADAR systems can rapidly acquire 3D point clouds by sampling the target surfaces using laser pulses. Such point clouds are widely used for diverse applications such as DSM/DTM generation, forest biomass estimation, target detection, wire avoidance and so on. Many kinds of LADAR systems have been developed with their respective purposes and applications. Particularly, Geiger mode imaging LADAR systems are increasingly utilized since they are energy efficient thank to extremely sensitive detectors incorporated into the systems. The purpose of this research is the performance assessment of a Geiger mode imaging LADAR system based on simulation with the real system parameters. We thus developed a simulation method of such a LADAR system by modeling its geometric, radiometric, optic and electronic aspects. Based on the simulation, we performed the performance assessment of a newly designed system to derive the outlier ratio and false alarm rate expected during its operation in almost real environment with reasonable system parameters. The proposed simulation and performance assessment method will be effectively utilized for system design and optimization, and test data generation.

• 보건행정학회지
• /
• 제11권2호
• /
• pp.29-57
• /
• 2001

Since the inauguration of the medical insurance system in 1977, the increasing medical expenses which can be menace to tile finance of the medical insurance system, have become major concern in the medical insurance field In Korea. This study focuses on the determinants of the medical expenses in the health insurance in Korea and analyzes the impact of these factors on the increase in the medical expenses. The empirical work is done using the pooled cross-section and time-series data of the medical insurance for the self-employeds and the industrial workers from the year 1995 to 1997. The result of this study shows that the main determinants of the medical expenses in the health insurance are the ratio of the population of the aged to the total population, the frequency of the utilization, number of doctors per capita and the regime changes. Although the increasing trend in the medical expenses seems to be unavoidable, we probably need to add some efficiency to the medical expenses by suppressing the supply and the utilization of the unnecessary medical services. The fee-for-service reimbursement system of today can't suppress the supply of the unnecessary medical services effectively. So we need to convert the present fee-for-service system into DRG's which is known to reduce the medical costs. The increase in the medical expenses comes from a lot of factors. Therefore, we should develop more systematic and comprehensive measures to control the soaring medical expenses in consideration of the various factors such as demand, supply, and the organizational side of the medical system.

• 한국식생활문화학회지
• /
• 제15권1호
• /
• pp.1-8
• /
• 2000

This study was to investigate the effects of concentration of malt extract in Sikhye manufacture on saccharification time, shapes of saccharified rice(the cooked rice) and sensory evaluation score of Sikhye. The optimum concentration of malt extract to reduce saccharification time and to keep desirable shapes of saccharified rice was 4 times (rice 24g, malt 28g and D.W. 240ml) as suitable as base composition formula(rice 6g, malt 7g and D.W. 240ml). The shapes of saccharified rice were influenced by the concentration of malt extract, the saccharification time and the shapes of steamed rice before saccharification. A good taste(softness) of Sikhye rice and the desirable shapes of saccharified rice were more suitable in the case of a small amount of unsaccharified starch than in the case of finishing saccharification. The optimum saccharification time to keep the desirable shapes of saccharified rice was 240min and also was desirable between 210 and 270min. To keep a good taste(softness) and the desirable shapes of saccharified rice, and to reduce the manufacturing time, it is desirable to in mass production of Sikhye add 3 times more water after making Sikhye in the ratio of rice 24g, malt 28g and water 240ml. In this case the whole amount will become 4 times as much as the original one.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.577-584
• /
• 2009

Fusion of decisions in wireless sensor networks having flexibility on energy efficiency is studied in this paper. Two representative distributions, the generalized Gaussian and $\alpha$-stable probability density functions, are used to model non-Gaussian noise channels. By incorporating noise channels into the parallel fusion model, the optimal fusion rules are represented and suboptimal fusion rules are derived by using a large signal-to-noise ratio(SNR) approximation. For both distributions, the obtained suboptimal fusion rules are same and have equivalent form to the Chair-Varshney fusion rule(CVR). Thus, the CVR does not depend on the behavior of noise distributions that belong to the generalized Gaussian and $\alpha$-stable probability density functions. The simulation results show the suboptimality of the CVR at large SNRs.

• Corrosion Science and Technology
• /
• 제17권4호
• /
• pp.193-201
• /
• 2018

In order to suppress $CO_2$ emission and protect passengers in case of vehicle collision, continuous efforts are being made to increase the application ratio and tensile strength of advanced high strength steels used in the manufacturing of automotive body. Simultaneously, hydrogen embrittlement which was not a concern in the past has currently become a major issue due to microstructure that is sensitive to hydrogen uptake. The sensitivity increases with residual stress and hydrogen uptake content. Many automotive OEM companies and mill makers are setting specifications to control hydrogen embrittlement. The factors which lead to hydrogen embrittlement are material sensitivity, residual stress, and hydrogen concentration; researches are in progress to develop countermeasures. To reduce material sensitivity, mill makers add high energy trap elements or microstructure refinement elements. Automotive OEM companies design the car parts not to concentrate local stress. And they manage the levels to not to exceed critical hydrogen concentration. In this article, we have reviewed hydrogen embrittlement evaluation methods and corresponding solutions that are being studied in automobile manufacturing industries and mill makers.

• KIEAE Journal
• /
• 제5권3호
• /
• pp.49-56
• /
• 2005

Recently the Volatile Organic Compound, HCHO, a harmful object spout from the construction materials is made an issue of social problem. Also the appearance of the building where the confidentiality is high was interior air pollution and it was brought about a huge problem. The government research facility and a relation industry sector conducts a many effort to improves like this actual condition. The Diverse ability building material which contains the natural material of the jade, the charcoal and the hwangto instead of the finish material which contains the harmful chemical material, is becoming development and utility. Hereupon the study have carried out research on hwangto plaster that was composed of hwangto and rice straw. The result of test that is deduced by basic proportion is properly appeared with suitable ratio of the hwangto and the sand to 4:6~5:5 by the compressive strength and crack control, workability. The result of test, that adds the rice straw to basic blending for a crack control, appeared with the fact that it is most suitable 3%to add the rice straw that has a length of 0.5cm~2cm. The result of test that plaster over the large size to compare a cement plaster with a hwangto plaster show a similar efficiency by workability. Also it controlled the crack and peeling off actual condition which is discovered from the hwangto plaster of existing perfectly.

• Journal of the Korean Wood Science and Technology
• /
• 제13권3호
• /
• pp.49-53
• /
• 1985

The effects of pre-treatments, the hot water extraction of wood meal and the addition of chemical ($CaCl_2$) to wood-cement water system on the properties of wood-cement composite such as modulus of rupture (MOR), modulus of elasticity (MOE), water sorption ratio and swelling ratio of resulting boards were studied in this experiment. The wood meals through 0.83mm(20 mesh) and retained on 0.42mm(35 mesh) screen were prepared from Pinus densiflora S. at Z. and Larix leptolepsis G. For hot water extraction, 500 grams of wood meal for each species were heated to boiling with 1,500ml of distilled water in 2-liter beaker for 6 hours. Every 2 hours, the wood meals were washed with boiling distil1ed water and reheated to boiling again. After 6 hours boiling, the boiled wood particles were collected by pouring this particles on 200 mesh screen. The collected particles then washed twice with hot distilled water and dried for 24 hours in an oven at $109{\pm}20^{\circ}C$. A mixture of 663.4 grams of cement with 331.7 grams of wood meal based on oven-dry weight were dry-mixed in a plastic vessel. The mixture was kneaded with 497.6ml of distilled water in the ratio of 1.5ml of water to a gram of wood meal. To add calcium chloride to the mixture as an accelerator, $CaCl_2$ 4% solution by weight per volume, was added to pine-or larch-cement board in the ratio of 3% to cement weight. To set wood-cement board, this mixture was clamped at 30cm ${\times}$ 30cm, in thickness of 1.5cm for 3 days at room temperature, declamped and then placed at open condition for 17 days. The target density was 1.0. The four specimens sized to 5cm in width and 28cm in length were used for MOR and MOE test for each treatment. After MOR test, the tested specimens were cut to the size of 5cm ${\times}$ 5cm for water sorption and swelling test. The twenty specimens used to measure the water sorption ratio (soaking 24 hours) and ten of these were used for swelling ratio measurement The results obtained were as follows: 1) Larch was not suitable for wood-cement boards because larch-cement board developed no strength, but pine showed 97.9kg/$cm^2$ by hot water extraction. 2) To increase MOR, hot water extraction was more effective than the addition of $CaCl_2$ in pine and larch because the $CaCl_2$ addition was seemed to speed up the ratio of cement hydration without reacting with the wood substances. 3) The water sorption ratio was lowered by the addition of $CaCl_2$ to wood-cement system because the chemical additive accelerated the rate of cement hydration. 4) In pine-cement board, the swelling ratio from 0.37 to 0.42 percent was observed in length and the swelling ratio from 0.88 to 2.0 percent in thickness. As a rule, the swelling ratio of wood-cement board was very low and the swelling ratio in thickness was higher than in length.