• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.2091-2099
• /
• 2000

The object of the present study is to present an adaptive wavelet-Galerkin method for the analysis of thin-walled box beam. Due to good localization properties of wavelets, wavelet methods emerge as alternative efficient solution methods to finite element methods. Most structural applications of wavelets thus far are limited in fixed-scale, non-adaptive frameworks, but this is not an appropriate use of wavelets. On the other hand, the present work appears the first attempt of an adaptive wavelet-based Galerkin method in structural problems. To handle boundary conditions, a fictitous domain method with penalty terms is employed. The limitation of the fictitious domain method is also addressed.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.3
• /
• pp.19-21
• /
• 2004

This paper presents a 3-dimensional diffusion simulation with adaptive solution strategy. The developed diffusion simulator VLSIDIF-3 was designed to re-refine areas. Refine scheme was calculated by the difference of doping concentration between any of two nodes. Each element is greater than tolerance and redo diffusion process until error is tolerable. Numerical experiment in low doping diffusion problem showed that this adaptive solution strategy is very efficient in both memory and time, and expected this scheme would be more powerful in complex diffusion model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.12
• /
• pp.1180-1187
• /
• 2007

In the present work, topology optimization method using adaptive inner-front level set method is presented. In the conventional level set based topology optimization method, there exists an incapability for inner-front creation during optimization process. In this regard, as a new attempt to avoid and to overcome the limitation, an inner-front creation algorithm is proposed. In the inner-front creation algorithm, the strain energy density of a structure along with volume constraint is considered. Especially, to facilitate the inner-front creation process during the optimization process, the inner-front creation map which corresponds to the discrete valued function of strain energy density is constructed. In the evolution of the level set function during the optimization process, the least-squares finite element method (LSFEM) is employed. As an application to shell structures, the lightweight design of doubly curved shell and segmented mirror is carried out.

• Structural Engineering and Mechanics
• /
• v.35 no.3
• /
• pp.283-299
• /
• 2010

This paper addresses the numerical simulation of fatigue crack growth in arbitrary 2D geometries under constant amplitude loading by the using a new finite element software. The purpose of this software is on the determination of 2D crack paths and surfaces as well as on the evaluation of components Lifetimes as a part of the damage tolerant assessment. Throughout the simulation of fatigue crack propagation an automatic adaptive mesh is carried out in the vicinity of the crack front nodes and in the elements which represent the higher stresses distribution. The fatigue crack direction and the corresponding stress-intensity factors are estimated at each small crack increment by employing the displacement extrapolation technique under facilitation of singular crack tip elements. The propagation is modeled by successive linear extensions, which are determined by the stress intensity factors under linear elastic fracture mechanics (LEFM) assumption. The stress intensity factors range history must be recorded along the small crack increments. Upon completion of the stress intensity factors range history recording, fatigue crack propagation life of the examined specimen is predicted. A consistent transfer algorithm and a crack relaxation method are proposed and implemented for this purpose. Verification of the predicted fatigue life is validated with relevant experimental data and numerical results obtained by other researchers. The comparisons show that the program is capable of demonstrating the fatigue life prediction results as well as the fatigue crack path satisfactorily.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.112-114
• /
• 1996

In this paper a simple mesh refinement technique for finite element method is proposed using error estimation only on the material boundaries. The boundary errors are estimated by the continuity conditions of normal B field and tangential B field. From the error estimation fine meshes are accomplished on the boundary and propagate to the near region by Delanunay mesh tessellation. This adaptive mesh refinement technique is applied to the force calculation of magnetic clutch composed by several material regions and makes good convergence.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1818-1827
• /
• 2004

This paper carried out numerical calculation about the directivity synthesis problem in two dimension of adaptive ultrasonic transducers. Adaptive system for directivity synthesis is constructed by multi-electrode array on the surface of only one piezoelectric ceramic plate combined with optimal algorithm. In order to realize the desired directivity that is established arbitrarily, the optimal vibrational displacement is calculated by optimal algorithm (DFP method). Secondly, the optimal voltage of electrodes which is correspond to the calculated vibrational displacement is calculated used by finite element method and DFP method. And, the vibration analysis in two dimension of piezoelectric transducer carried out by means of finite element method.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.481-486
• /
• 2007

The Zienkiewicz-Zhu(Z/Z) error estimate is slightly modified for the hierarchical p-refinement, and is then applied to L-shaped plates subjected to bending to demonstrate its effectiveness. An adaptive procedure in finite element analysis is presented by p-refinement of meshes in conjunction with a posteriori error estimator that is based on the superconvergent patch recovery(SPR) technique. The modified Z/Z error estimate p-refinement is different from the conventional approach because the high order shape functions based on integrals of Legendre polynomials are used to interpolate displacements within an element, on the other hand, the same order of basis function based on Pascal's triangle tree is also used to interpolate recovered stresses. The least-square method is used to fit a polynomial to the stresses computed at the sampling points. The strategy of finding a nearly optimal distribution of polynomial degrees on a fixed finite element mesh is discussed such that a particular element has to be refined automatically to obtain an acceptable level of accuracy by increasing p-levels non-uniformly or selectively. It is noted that the error decreases rapidly with an increase in the number of degrees of freedom and the sequences of p-distributions obtained by the proposed error indicator closely follow the optimal trajectory.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.04a
• /
• pp.1-8
• /
• 1994

An automated procedure which allows adaptation of spatial and time discretization simultaneously in finite element analysis of linear elastodynamic problems is presented. For dynamic problems having responses dominated by high frequency modes, such as those with impact, explosive, traveling and earthquake loads high gradient stress regions change their locations from time to time. And the time step size may need to vary in order to deal with whole process ranging from transient phase to steady state phase. As the sizes of elements in space vary in different regions, the procedure also permits different time stepping. In such a way, the best performance attainable by the finite element method can be achieved. In this study, we estimate both of the kinetic energy error and stran energy error induced by spatial and time discretization in a consistent manner. Numerical examples are used to demonstrate the performance of the procedure.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.3
• /
• pp.197-206
• /
• 2009

In a finite element analysis of the metal forming processes having large plastic deformation, largely distorted elements are unstable and hence they influence upon the result toward negative way so that adaptive remeshing is required to avoid a failure in the numerical computation. Therefore automatic mesh generation and regeneration is very important to avoid a numerical failure in a finite element analysis. In case of generating quadrilateral mesh, the automation is more difficult than that of triangular mesh because of its geometric complexity. However its demand is very high due to the precision of analysis. Thus, in this study, an automatic quadrilateral mesh generation and regeneration method using grid-based approach is developed. The developed method contains decision of grid size to generate initial mesh inside a two dimensional domain, classification of boundary angles and inner boundary nodes to improve element qualities in case of concave domains, and boundary projection to construct the final mesh.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.607-614
• /
• 2002

For the accurate analysis of crack problems, considerable nodal refinement near the crack tip to capture singular stress field with sufficient accuracy to provide a useful computation of stress intensity factor is required. So, in this paper, adaptive nodal refinement scheme is proposed where nodes in restricted cell regions centered at crack tip are arranged in array for enhanced spatial resolution and adaptivity. With only cell-wise adaptive refinement scheme around crack tip fields, singularity of crack tip is sufficiently described to expect a successive crack propagate direction. Through numerical tests, accuracy of the proposed adaptive scheme is investigated and compared with the finite element and experimental results. By this implementation, it is shown that high accuracy is achieved by using iterative cell-wise solution method fur analyzing crack propagation problems.