• The Journal of the Acoustical Society of Korea
• /
• v.36 no.2
• /
• pp.115-122
• /
• 2017

We propose a robust adaptive beamforming algorithm for triplet array sonar. The proposed beamforming algorithm obtains robustness to mismatches, left/right discrimination, and has two steps. The first is a cardioid beamformer, which supports left/right discrimination of target signals. It applies the conventional delay-and-subtract to each triplet's signal with its rotation angle and obtains multiple cardioid beams. The second is a robust adaptive beamforming to minimize nearby interferences. We regard cardioid beams as input signals of a line array and apply an adaptive beamforming algorithm to the cardioid beams. Simulations results show that the proposed algorithm provides significantly better performance than the conventional algorithms, while supporting left/right discrimination of target signals.

• Journal of Sensor Science and Technology
• /
• v.14 no.6
• /
• pp.430-437
• /
• 2005

In this paper, we proposed a biologically inspired light-adaptive edge detection circuit based on the human retina. A saturating resistive network was suggested for light adaptation and simulated by using HSPICE. The light adaptation mechanism of the edge detection circuit was quantitatively analyzed by using a simple model of the saturating resistive element. A light-adaptive capability of the edge detection circuit was confirmed by using the one-dimensional array of the 128 pixels with various levels of input light intensity. Experimental data of the saturating resistive element was compared with the simulated results. The entire capability of the edge detection circuit, implemented with the saturating resistive network, was investigated through the two-dimensional array of the $64{\times}64$ pixels

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.1
• /
• pp.66-72
• /
• 2018

In this paper, we propose an adaptive beamforming algorithm of triplet arrays for active sonar systems. The proposed algorithm consists of three steps: matched filters, cardioid beamforming, and line array beamforming. First, we apply a matched filter of a transmitted pulse to received individual sensor signals and obtain filterd signals. Then, we perform the fast Fourier transform to the matched filter results, and make a cardioid beam for each triplet data, respectively. Finally, we apply an adaptive beamforming by assuming that the cardioid beams are input signals of a line array. Experimental results demonstrate that the proposed algorithm provides better performances than conventional algorithms.

• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.207-213
• /
• 2017

The Adaptive Front-lighting System (AFS) is a part of the active safety system, providing optimized vision to the driver during night time and other poor-sight conditions of the road by automatic adaptation of lighting to environmental and traffic conditions. Basically, an AFS provides four different modes of the passing beam as designated in an United Nations Economic Commission for Europe regulation (ECE324-R123): neutral state or country light (Class C), urban light (Class V), highway light (Class E), and adverse weather light (Class W). In this paper, we first present an optics design for an AFS system capable of producing the Class C/V/E/W patterns requiring only on/off modulation of multi-array LEDs with no need for any additional mechanical components. The AFS optics consists of two separated modules, cutoff and spread; the cutoff module lights a narrow central area with high luminous intensity, satisfying the cutoff regulation, and the spread module forms a wide spread beam of low luminous intensity. Each module consists of two major parts; the first converts a discretely positioned LED array into a full-filled area emitting light source plane, and the second projects the light source plane to a 25 m away target plane. With the combination of these two optics modules, the four beam patterns are formed by simple on/off modulation of multi-array LEDs. Then we report the development of a prototype that was demonstrated to provide the four beam patterns.

• Journal of Sensor Science and Technology
• /
• v.1 no.2
• /
• pp.155-163
• /
• 1992

The phased array antenna has the ability to perform adaptive sampling by directing the radar beam without inertia in any direction. The adaptive sampling capability of the phased array antenna allows each sampling time interval to be varied for each target, depending on the acceleration of each target at any time. In this paper we design a three-dimensional adaptive tracking algorithm for the phased array radar system with a given set of measurement parameters. The tracking algorithm avoids taking unnecessarily frequent samples, while keeping the angular prediction error within a fraction of antenna beamwidth so that the probability of detection will not be degraded during a track update illuminations. In our algorithm, the target model and the sampling rate are selected depending on the target range and the target maneuver status which is determined by a maneuver detector. A detailed simulation is conducted to test the validity of our tracking algorithm for encounter geometries under various conditions of maneuver.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.375-382
• /
• 2018

To eliminate strong jamming signals, a radar acquires a relatively weak target signal by using a side-lobe canceller (SLC) algorithm. This paper presents a novel adaptive SLC algorithm that is applicable to a fully digital active array radar. First, a covariance matrix is obtained from the SLC beam. Then, an adaptive SLC coefficient is extracted after calculating the correlation matrix between the main beam signal and the SLC beam signal. Finally, the target signal is estimated and the jamming signal is removed through the operation with the main beam signal. The application results from simulated radar signals demonstrated that the proposed algorithm is effective in an SLC system. Moreover, we analyzed various considerations and improved systematic usability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.491-498
• /
• 2017

GPS (global positioning system) is a popular system that provides location information by measuring arrival time difference at the receiver between several GPS satellite signals. GPS is widely used in commercial area as well as military systems. Reliable GPS signal reception is more important in the military applications such as guided missiles. However, since the carrier frequencies of the GPS signals are well known and the received power is extremely low, the GPS systems are vulnerable to intentional jamming attacks. To remove jammers while maintaining GPS signals at the received signals, a popular technique is an adaptive beam steering method based on array antenna. Among adaptive beam steering techniques, this paper considers MVDR (minimum variance distortionless response) algorithm, and proposes a new adaptive technique that preserves the received signals at desired directions, but removes the unknown jamming signals adaptively. The performance of the proposed method is verified through computer simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1539-1545
• /
• 2015

GPS (global positioning system) is a popular system that provides location information by measuring arrival time difference at the receiver between several GPS satellite signals. GPS is widely used in commercial area as well as military systems. Reliable GPS signal reception is more important in the military systems. However, since the carrier frequencies of the GPS signals are well known, the GPS receivers are vulnerable to intentional jamming attacks. To remove jammers but maintain GPS signals at the received signals, a popular technique is an adaptive beam steering method based on array antenna. Among adaptive beam steering techniques, this paper considers MVDR (minimum variance distortionless response) algorithm, and proposes a new adaptive technique that preserves the received signals at desired direction, but removes the jamming signals adaptively. The performance of the proposed method is verified through computer simulation.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3E
• /
• pp.119-125
• /
• 2002

In the conventional generalized side-lobe canceller (GSC), the output is an estimated error signal that causes the adaptive filter weights do not converge to the optimal value. This paper presents a new side-lobe canceller with adaptive compensator th it reduces the misadjustment of the adaptive filter coefficients for the structural problem in the GSC. The adaptive compensator separates the output signal from the estimated error. The newly estimated error signal converges to the zero while the output signal tracks the target signal. This paper shows improvement of the performance by comparing the computer simulation of the output signal of GSC with the output signal of the proposed algorithm.

• The Journal of Engineering Geology
• /
• v.5 no.1
• /
• pp.95-103
• /
• 1995

This paper concerns the use of derivative null constraint in an adaptive array pmcessor in the spatial and frequency domains with respect to a composite array processor to obtain a modified composite array processor. It is assumed that the frequency of interference signals is the same as that of a desired signal, interference directions are different from the desired signal, and interference directions and frequencies are known. Simulation results demonstrate that a higher-order derivative null broadens the null width which is appropriate for eleminating a broadband interference and a zero-order derivative null (i.e., a simple point null) with respect to frequency reduces the residual error inherent in the composite array precessor.