• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.99-104
• /
• 2001

Discrete-time controller design is proposed using feedback system identification in frequency domain. System Stability imposed by a new controller is checked in the function of a conventional closed-loop system, instead of a poorly modeled plant due to non-linearity and disturbance as well as unstable components, etc. The stability of the system is evaluated in view of Popov criterion. All the equations are formulated in the framework of the discrete-time system. Simulation results are shown on the plant with input saturation components, DC disturbance and a pure integration.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.664-669
• /
• 2001

Continuous-time controller design is proposed using feedback system identification in frequency domain. System stability imposed by a new controller is checked in the function of a conventional closed-loop system, instead of a poorly modeled plant due to non-linearity and disturbance as well as unstable components, etc. The stability of the system is evaluated in view of Nyquist stability. All the equations are formulated in the framework of the discrete-time system. Simulation results are shown on the plant with input saturation and DC disturbance.

• 천문학회보
• /
• 제37권2호
• /
• pp.219.2-219.2
• /
• 2012

We are developing Adaptive Optics (AO) system for 24 inch telescope at Seoul National University Observatory. It consists of the tip-tilt correction system and the residual wavefront error correction system with a deformable mirror and a wavefront sensor. We present the construction and performance measurements of the tip-tilt correction system. The tip-tilt component is the single largest contributor to wavefront error, especially for small telescope. The tip-tilt correction system consists of a quadrant photodiode, a tip-tilt mirror and a feed back loop. The collimated He-Ne laser beam is used for input light source and is artificially disturbed by air turbulence generated by a heat gun. Most of the turbulence is of low frequency less than 20 Hz, but extends to a few hundreds Hz. It is found that the closed loop system using proportional-integral-derivative (PID) control successfully corrects tip-tilt error at a rate as high as 300~400 Hz.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3685-3693
• /
• 2021

This paper presents a disturbance observer-based robust backstepping load-following control (DO-RBLFC) scheme for modular high-temperature gas-cooled reactors (MHTGRs) in the presence of actuator saturation and disturbances. Based on reactor kinetics and temperature reactivity feedback, the mathematical model of the MHTGR is first established. After that, a DO is constructed to estimate the unknown compound disturbances including model uncertainties, external disturbances, and unmeasured states. Besides, the actuator saturation is compensated by employing an auxiliary function in this paper. With the help of the DO, a robust load-following controller is developed via the backstepping technique to improve the load-following performance of the MHTGR subject to disturbances. At last, simulation and comparison results verify that the proposed DO-RBLFC scheme offers higher load-following accuracy, better disturbances rejection capability, and lower control rod speed than a PID controller, a conventional backstepping controller, and a disturbance observer-based adaptive sliding mode controller.

• 방송공학회논문지
• /
• 제16권3호
• /
• pp.520-529
• /
• 2011

본 논문에서는 SVC(Scalable Video Coding) 및 MVC(Multiview Video Coding) 등의 다계층(miulti-layer) 비디오의 효율적인 적응 HTTP 스트리밍을 위한 MPEG-2 TS(Transport Stream) 헤더의 확장을 제안한다. 먼저 TS로 다중화한 SVC/MVC를 HTTP를 통하여 스트리밍할 경우 계층별 적응 스트리밍을 지원하기 위한 기존 TS의 한계점을 분석하고, TS 헤더의 확장을 통하여 TS 레벨에서 효율적인 적응을 제공하는 시그널링(signaling) 기법을 제시한다. 본 논문의 헤더 확장은 TS의 적응 헤더(adaptation header)의 사적 데이터 필드(private data field)를 이용하여 스케일러빌리티 및 뷰 정보를 기술함으로써 TS와의 호환성을 유지하면서 TS 레벨에서의 다양한 스케일러블 계층 단위로 적응(adaptation)을 가능하게 한다. 제안한 기법과 기존의 PID(packet ID)를 사용한 방법에 대하여 적응의 유연성 및 복잡도 등을 비교 분석한다. 또한 제안한 기법의 TS 오버헤드 증가를 분석하고 이를 최소화하기 위한 헤더 확장 기법을 제안한다.

• 대한기계학회논문집A
• /
• 제20권1호
• /
• pp.115-126
• /
• 1996

In the time optimal control problem, bang-bang control has been used becaese it is the theoretical time minimum solution. However, to improve tracking speed performance in the time optimal control, it is important to select a switching point accurately which makes the velocity zero near the target track. But it is not easy to select the swiching point accurately because of the damping coefficient variation and uncertainties of modeling an actual system. The Adaptive model following control(AMFC) is implemented to relieve the difficulty and inconvenience of this task. The AMFC and make the controlled plant follow as closely as possible to a desired reference model whose switching point can be calculated easily and accurately, assuring the error between the states of the reference model and those of the controlled plant appoaches zero. The hybrid control method composed of AMFC and PID is applied to a tracking actuator of the magneto optical disk drive(MODD) in random access devices to improve its slow tracking performance. According to the simulaion and experimental results, the average tracking time as small as 20ms is obtained for a 3.5 magneto-optical disk drive. The AMFC also can be applied for other random access devices to improve the average tracking performance.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.545-546
• /
• 2012

일반적으로 회전력이 발생하는 제어시스템에 있어서 발생되는 외란과 시스템의 동특성에 의해 발생되는 리플 등을 보정하기 위해 다양한 제어기법들이 연구되고 있다. 특히, 제어시스템에 존재하는 미지의 외란을 제거하기 위하여 AFC(Adaptive Feedforward Cancellation) 제어이론을 적용하여 미지의 외란에 대한 시스템의 안정성을 확보하려고 노력하고 있다. 그러나 기존의 AFC의 구현을 위하여 연속 시간제어시스템의 전달함수인 IMP(Internal Model Principle)를 이용하여 특정 주파수 영역에 대한 외란을 제거하고 있지만 보다 광범위한 영역에 대해서는 제어 성능은 아직 부족한 편이다. 본 논문에서는 기존의 PID 제어기를 이용한 위치제어에 있어서 발생할 수 있는 외란을 제거하기 위해 AFC 제어이론인 IMP 전달함수와 인공지능 기법인 Fuzzy 제어기를 추가로 설계하여 모터의 위치제어에 대한 성능과 외란 제어에 대한 성능을 제시하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.248-252
• /
• 2003

This paper has a control method proposed for the effective self-tuning fuzzy speed control based on neural network of the induction motor indirect vector control. The vector control of an induction motor provides the decoupled control of the rotor flux magnitude and the torque producing current to performance is desirable. But, the drive performance often degrades for the machine parameter variations and its condition give rise to coupling of flux and torque current. The fuzzy speed control of an induction motor has the robustness about machine parameter variations compared with conventional PID speed control in a way. That proved to be some waf from the true. The purpose of this paper is to improve the adaptation by offering self-turning function to fuzzy speed controller. In this paper, the adaptive mechanism of fuzzy speed control in used ANN(Artificial Neural Network) technique is applied in an IFO induction machine drive, such that the machine can follow a reference model (an ideal field oriented machine) to achieve desired speed. In this paper proved the self-turning method of fuzzy controller has the robustness about parameter variation and the wide range of adaptation by simulation.

• 한국가스학회지
• /
• 제15권1호
• /
• pp.1-8
• /
• 2011

최근 석유 위주의 에너지원에서 가스나 신재생에너지와 같은 새로운 에너지원을 생산 혹은 이용하는 공정들에 대한 연구가 활발한 가운데 이러한 공정들의 상업화를 위해서는 조업 중 에너지 절감과 생산 단가의 경제성 확보가 필수적이며, 이를 위해서는 적합한 공정제어 기법의 도입이 필수적이라 할 수 있다. 본 논문에서는 지난 50여 년간 공정산업에 적용된 다양한 공정제어 기법 중 큰 기틀이 되는 몇몇 기술을 소개하고, 가스 관련 공정의 응용 예 및 앞으로 나아갈 방향에 대해 논하였다.

• Journal of Power Electronics
• /
• 제7권2호
• /
• pp.159-173
• /
• 2007

In this paper, an intelligent sliding-mode position controller (ISMC) for achieving favorable decoupling control and high precision position tracking performance of permanent-magnet synchronous motor (PMSM) servo drives is proposed. The intelligent position controller consists of a sliding-mode position controller (SMC) in the position feed-back loop in addition to an on-line trained fuzzy-neural-network model-following controller (FNNMFC) in the feedforward loop. The intelligent position controller combines the merits of the SMC with robust characteristics and the FNNMFC with on-line learning ability for periodic command tracking of a PMSM servo drive. The theoretical analyses of the sliding-mode position controller are described with a second order switching surface (PID) which is insensitive to parameter uncertainties and external load disturbances. To realize high dynamic performance in disturbance rejection and tracking characteristics, an on-line trained FNNMFC is proposed. The connective weights and membership functions of the FNNMFC are trained on-line according to the model-following error between the outputs of the reference model and the PMSM servo drive system. The FNNMFC generates an adaptive control signal which is added to the SMC output to attain robust model-following characteristics under different operating conditions regardless of parameter uncertainties and load disturbances. A computer simulation is developed to demonstrate the effectiveness of the proposed intelligent sliding mode position controller. The results confirm that the proposed ISMC grants robust performance and precise response to the reference model regardless of load disturbances and PMSM parameter uncertainties.