• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.473-477
• /
• 2006

국내 건설현장은 아직까지 근로자를 위한 많은 편의 시설들이 부족한 형편이며, 이러한 것들은 궁극적으로 근로자들 스스로 안전의식이 결여되어 건설재해 발생에 악영향을 미치고, 이것은 건설현장에 대한 3D기피 현상을 확산시켜 인력난을 겪고 있는 현실이 더 가중될 것이다. 본 연구에서는 이러한 문제점의 해결방안을 인간본성의 원천에서 찾아 내어 해결하기 위해 근로자들의 감성을 일깨우는 감성안전문화시설들을 현장에 적용하였다. 그 결과, 감성안전문화시설들은 근로자들에게 작업 중 안전의식을 조성시키는 긍정적인 측면이 있었다. 또한 이러한 시설물들은 근로자들로 하여금 조직의 일원으로서 느끼게 했으며, 작업능률에 큰 도움이 되는 것으로 조사되었다.

• KIEAE Journal
• /
• 제13권1호
• /
• pp.9-15
• /
• 2013

This study aims to analyze, by forming an experimental area of artificial soil green area that is of equal scale and analyzing the characteristics of runoff water in accordance with the cross-section configuration, applied the benefits in an actual multi-housing case study complex. In examining the measurement test results of the runoff water infiltration amount and surface runoff amount of a low-profile type green area(Dish type) and a general type green area(Mound type), Dish type was seen to have 1.5-times higher runoff water infiltration amount than Mound type during heavy rainfalls and showed about a 50% reduction with respect to the surface runoff amount. In other words, artificial soil green area offers the benefit of reduction of surface runoff amount and suggests, in actuality even with a change to the cross-sectional configuration of artificial soil green area alone at the time of construction of multi-housings, the possibility of benefits and reduction of costs spent on existing rainwater management facilities.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1518-1520
• /
• 2002

Purpose of this research compares best transfer speed about applied frequency and voltage using characteristic of $L_1-B_4$ mode and $L_1-B_8$ mode linear ultrasonic motor that use piezoelectric effect. By method of study, analyzed best transfer speed measuring and comparison load status that use actuality telephone card in $L_1-B_4$ mode linear ultrasonic motor and no-load status of $L_1-B_8$ mode linear ultrasonic motor. Experiment result is applied frequency(58.4Hz) in $L_1-B_4$ mode linear ultrasonic motor (load state) and the best transfer speed by 19.8[cm/s] at applied voltage(56V) point. Also, $L_1-B_8$ mode linear ultrasonic motor (no-load state) is best transfer speed by applied frequency(27.9kHz) and 32.96[cm/s] at applied voltage (50V) point.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권4호
• /
• pp.135-143
• /
• 2004

본 연구에서는 6경간 SCP(Steel Confined Prestressed Concrete) 거더교의 연속화에 따른 연속지점부의 구조거동에 대해 해석적인 방법과 실험적인 방법으로 콘크리트 바닥판의 균열 및 피로에 대한 사용성과 안전성을 분석하였다. SCP 거더의 구조거동을 분석하기 위해 기존의 PSC 이론과 강 거더 이론을 혼용하여 합성효과를 분석하였고, 정적재하실험과 피로실험에 의해 바닥판 콘크리트의 균열 발생 여부와 콘크리트의 응력 및 강재의 피로응력을 검토하였다. 검토 결과 실제 교량에 대해 내부지점을 연속화한 6경간 SCP 거더교는 공용하중에 대하여 콘크리트의 균열 및 피로에 대해서는 구조적으로 안전한 것으로 판단된다.

• 한국경영과학회지
• /
• 제41권1호
• /
• pp.127-143
• /
• 2016

This study applied DEA analysis to measure the relative efficiency of 35 companies that produce automobile body components. First, the input and output, the improvement target value of the calculated variables, and the reference group for benchmarking for inefficient groups to become efficient groups were established through DEA analysis. In addition, whether inefficiency was due to technical inefficiency or size was analyzed in connection with the cases of the actual companies through the measurement of scale efficiency. Second, a route for efficiency improvement was derived through DEA-Tier analysis by defining the possible group for benchmarking in actuality within the production industry of automobile body components where the primary cooperative company belonged. Third, the financial variables that generate the difference between efficient and inefficient groups were derived through logistic regression analysis. Financial strategies that determine the direction the indices should be improved to allow the inefficient group to become an efficient one were recommended. This research is expected to provide diagnostic methods for management efficiency and the direction of improvement to enhance the management efficiency of automotive parts makers by identifying the causes of the inefficiency of domestic automotive parts makers empirically. The study also provides financial strategies together with the target values of efficiency improvement for each individual company.

• 한국산업융합학회 논문집
• /
• 제16권4호
• /
• pp.113-117
• /
• 2013

This paper describes a new technology to develop the character recognition technology based on pattern recognition for non-contacting inspection optical lens slant or precision parts, and including external form state of lens or electronic parts for the performance verification, this development can achieve badness finding. And, establish to existing reflex data because inputting surface badness degree of scratch's standard specification condition directly, and error designed to distinguish from product more than schedule error to badness product by normalcy product within schedule extent after calculate the error comparing actuality measurement reflex data and standard reflex data mutually. Developed system to smallest 1 pixel unit though measuring is possible 1 pixel as $37{\mu}m{\times}37{\mu}m$ ($0.1369{\times}10-4mm^2$) the accuracy to $1.5{\times}10-4mm$ minutely measuring is possible performance verification and trust ability through an experiment prove.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.117-120
• /
• 2003

본 연구는 건설 기능 인력의 교육 훈련을 활성화하여 건축물의 품질 확보와 일용직 근로자의 경제적 문제를 해결하는 것을 목적으로 한다. 교육훈련의 활성화를 위해서는 정부의 지원과 개입이 필요하다. 특히 청년층을 건설 현장으로 유입하기 위해서는 이들이 요구하는 것이 무엇인지 분석하여 그 요구가 충족될 수 있도록 제도록 여건을 마련한 후 이를 적극 홍보해야 한다. 또한 건설 현자에서 전문성을 인정받을 수 있도록 교육 프로그램이 개편되어야 하며 이들이 자부심을 가지고 일을 할 수 있는 사회적 여건이 조성되어야 한다.

• 산업경영시스템학회지
• /
• 제13권21호
• /
• pp.7-10
• /
• 1990

In the modern society where information system based on the computer in organization have been developed over again. A decision support system is one of the most popular topics. The computer have been discussed in relation to management strategy between enterprisers and researchers so far, but the accumulation of data resource and communication foundation have not been attended in actuality. The organic connection between business and information technique have been less progressed than our expectation. At this point of time. such a technical restrution getting removed, We have closed a gap between management strategy and computer. Now we are taking a growing interest in computer use for supporting proceedings decision, a lot of strategic marketing decision is wifely used in such a case, and the technical development is comming to advanced. In this study, I Investigate such a new tendency as strategic program and proceedings decision system. I will especially focus my study on a strategic program and a budget control corporation, so to speak, on strategic budget management system. Concretely the purpose of this study is to investigate what functions the proceedings decision support system requires in order to deal with the problem of strategic level and to practically establish the system with the use of DSS GENERATOR/ARISTOTLE in my laboratory.

• 컴퓨터교육학회논문지
• /
• 제7권4호
• /
• pp.131-140
• /
• 2004

최근 학교 현장에서는 웹 기반의 멀티미디어 자료에 대한 활용이 매우 크게 증가하고 있다. 이에 따라 멀티미디어 자료를 수월하게 검색하기 위한 다양한 메타데이터 요소 정의가 등장하고 있으나 국제 표준을 중심으로 제시되고, 국내 현장 교사들의 의견은 거의 반영되지 않고 있다. 이에 본 연구에서는 국내 현장 교사들의 의견을 반영하여 웹 페이지 안에 포함되어 있는 멀티미디어 자료들을 효율적으로 검색, 관리할 수 있는 메타데이터 요소를 정의하고 실제 활용을 위한 XML DTD를 제시하고자 한다. 본 연구 결과는 멀티미디어 자료의 공유 및 활용을 높이는데 사용될 수 있다.

• 한국해양공학회지
• /
• 제18권1호
• /
• pp.69-74
• /
• 2004

In general, the protection method of Shell and Tube Type heat exchanger for a vessel has been applied as a sacrificial anode, which is attached at the inner side of the shell. However, this is an insufficient protection method for tube. Therefore, a more suitable method, such as the impressed current cathodic protection for tube protection, is required. Al-brass is the raw material of tubes for heat exchanger of a vessel where seawater is used for cooling the water. It has a high level of heat conductivity, excellent mechanical properties, and a high level of corrosion resistance, due to a cuprous oxide (Cu$_2$O) layer against th seawater. However, in actuality, it has been reported that Al-brass tubes for heat exchanger of a vessel can produce local corrosion, such as stress corrosion cracking (SCC). This paper studied the effect of impressed potential on the stress corrosion cracking of Al-brass for impressed current cathodic protection in 3.5% NaCl +0.1% NH$_4$OH solution, under flow by a constant displacement tester. Based on the test results, the latent time of SCC, stress corrosion crack propagation, and the dezincification phase of Al-brass are investigated.