• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.860-865
• /
• 2000

This Paper Proposes the test pieces of X, Y and Z axes to compensate the shape distortion of Selective Laser Sintering(SLS) parts resulting from the phase change during the sintering process. In no case of the proposed compensation test pieces of X, Y axes the accurate rates of shrinkage can be measured with the reduction of curling which is obtained from adjustment of build orientation and the formula used to get scale factors are proposed with the shrinkage rates of them. The scale factors of X, Y and Z axes are generated by building up proposed compensation test pieces. The generated scale iactors are required to satisfy the dimensional accuracy even if there are changes of the build position and the size of SLS parts in the build chamber. For this reason, it is proposed that the build positions and the size be considered to be noise factors against the compensation test pieces and a method is also proposed that scale factors be selected to robustly maintain the dimensional accuracy of SLS parts under the actual operating conditions with the application of the Taguchi Method.

• 전자공학회논문지A
• /
• 제31A권12호
• /
• pp.142-151
• /
• 1994

This paper proposes new algorithms to solve canonical piecewise-linear equations with linear partitions and illustrates their efficiency through the analysis of resistive network. The basic idea of the proposed algorithm is to find the best next guess, closest to the actual solution, at each Newton-Raphson (N-R) iteration by comparing the images of nest guess candidates and that of the actual solution. The proposed algorithm can reduce the number of the N-R iterations rquired for convergence greatly, compared to the actual solution, at each Newton-Raphson (N-R) iteration by comparing the images of next guess candidates and that of the actual solution. The proposed algorithm can reduce the number of the N-R iterations required for convergence greatly, compared to the Katzenelson algorithm. When applied to analyzing test circuits, the proposed algorithm required 8 to 20 times fewer N-R iterations and 5 to 10 times less CPU time than the Katzenelson algorithm, depending on the size of the circuits. The experimental results also exhibit that the efficiency of the proposed algorithm over the Katzenelson algorithm increases as the number of the piecewise-linear regions for the representation of the circuit.

• 복식
• /
• 제58권1호
• /
• pp.133-150
• /
• 2008

The purpose of this study was to recognize of the sizing system and analyze the fitting on formal pants of the on-line shopping mall for plus-sized women. To pursue this purpose, the investigation of the sizing system was focused on 22 online companies. The formal pants of 7 companies was selected among them. And actual sizes were compared with the guidance sizes of goods. For the assessment about the fitting on formal pants of 7 online companies, these came to make on to 16 obese women with 'A' body shaped and 'O' body shaped. A data analysis used the SPSS 14.0 statistics program. To verify the difference, this study used the variance analysis and Duncan's test for the postmortem verification. The result was as follows. 1. All of 22 companies were using the symbol such as 88, 99, 100 and 110 in the present condition of sizing system. The information about products size was presenting the products size not to be the body size. the guidance sizes of products were different from actual sizes of 7 companies to be assorted. Therefore, the guidance sizes of goods could not accomplish the facility. 2. According to the fitting-tests by the sensory assessment, the obese women with 'A' body shaped, did the dissatisfaction at the items of the hip circumference, abdominal region, crotch deep and pants length. The obese women with 'O' body shaped, did the dissatisfaction at the the items of crotch deep and pants length.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.332-337
• /
• 2009

The importance of the evaluation and verification of small-size cogeneration system has been emphasized because there is no KS-code related to the small-size cogeneration system. The evaluation method of small-size engine cogeneration system, regarding Japanese standard JIS B-8122 and international standard organization, ISO-8528, was applied to the system. The evaluation methods, start-test, rapid-load-up and rapid-load-down, etc. were executed at the system, and reasonable results were acquired. The electrical and thermal efficiencies were executed and analyzed at various load conditions. The NOx emission at various load condition was also measured. Finally, the gas engine cogeneration system was installed to a site for actual usage and it was continually operated during more than 6 months as the site condition.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.2-4
• /
• 2014

The preferred dimensions of the test opening for a window are $1250mm{\times}1500mm$ according to ISO 10140-1:2010. But tests done at actual size generally because not standardized for windows. In this study, we know the sound insulation characteristics by the size of windows using the single windows and double windows, consider the more effective performance evaluation method.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.739-744
• /
• 2007

Wind loads for cladding can be estimated using the maximum wind pressure including gust effects from wind-tunnel tests. However, when estimating the maximum wind pressure with gust effects, wind pressure coefficients for cladding would be different according to the averaging time of wind pressures, In the paper, for wind pressures obtained from wind-tunnel tests for apartment buildings, whose window panes were damaged by actual strong wind, it was investigated how pressure coefficients varied according to the size of cladding and averaging time using TVL method of Lawson. In result, it was found that the lesser the size of cladding and averaging time were, the larger pressure coefficients became. Accordingly, to estimate wind loads for cladding of apartment buildings and design it, the averaging time of wind pressures should be considered properly.

• 한국건축시공학회지
• /
• 제19권3호
• /
• pp.229-237
• /
• 2019

본 논문은 암반용 압축강도테스트 해머를 이용하여 초고강도 콘크리트 모의부재 압축강도 실험을 통한 강도추정에 대해서 검토하고자 하였다. 실험결과에 따르면, 본 실험 데이터값을 토대로 기존에 주로 사용되던 강도 추정식을 적용할 경우 각 식마다 차이가 있는 것으로 나타났다. 또한 압축강도 30MPa 이상으로 갈수록 실측 데이터를 과소평가하고 있는 것으로 나타났으며, 모든 강도 영역에서 실측치의 분포범위를 크게 벗어나고 있는 것으로 나타났다. W/B 종류별 타격방향 및 굵은 골재 유무와 상관없이 암반용 테스트 해머가 N형 슈미트 해머보다 높은 상관관계를 나타내었으며, 모르타르가 콘크리트보다 좀 더 높은 상관관계를 나타내었다. 그리고 굵은 골재 유 무에 따른 모의부재 반발도 측정결과 모르타르(2.26%/1.36)의 변동계수와 표준편차가 콘크리트(4.06%/2.5)보다 낮게 나타났으며, 굵은 골재의 치수가 작을수록 변동계수가 작아져 보다 정확한 값을 나타내는 것을 알 수 있다.

• 복식문화연구
• /
• 제8권2호
• /
• pp.272-281
• /
• 2000

The purpose of this study is to provide for the basic data useful to the effective production. For this purpose, 180 Korean mothers who bring up from newborns to four-year-old babies were sampled to survey the problems on size occurred by wearing and purchasing the Infants'Wear and positively identify the factors affecting the fitness. Data is processed by a computer(SAS) and analyzed by using frequency, perentage, mean, χ²-test, Duncan-test. The main results of this study are as follows ; 1. Consumers'awareness of sizing system of Infant's wear tent to present relatively high and tend to purchase their infants'wear larger than actual sizes or that consumers'preferences depend little on size adaptation. 2. As a result of analyzing the part not fit, neck circumference, waist circumference, total length, neck back-waist length is short, sleeve length, pants length, shoulder length is big. In all, it has been found through this study that fitness and awareness of sizing system of Infant's Wear in purchasing infants'wear was influenced by many external factors. Therefore, in order to maximize the size adaptability for infants, Infants'Wear must be present the reasonable sizes and specifications for infants'wear in consideration of domestic and foreign specifications and infants'health condition.

• 한국대기환경학회지
• /
• 제15권6호
• /
• pp.799-804
• /
• 1999

Particle collection characteristics of the MOUDI cascade impactor has been studied for coarse particles in the range of 2 to 20$mu extrm{m}$ in aerodynamic diameter. A vibrating orifice aerosol generator was empolyed to generate monodisperse test aerosols. The oleic acid and sodium chloride(NaCl) particles were used as test aerosols. Aluminum foil and Teflon filter were selected as impaction media. The sampling flow rate was changed from 25 to 35L/min. Particle collection efficiency for single stage was examined for liquid particles. The stage response was obtained experimentally for the cascade impactor composed of three stages and a backup filter. The results showed that most of particle collection efficiencies measured in this work are similar to the efficiency curves obtained by Marple et al.(1991). For particles less than cut-off size of the stage, the collection efficiencies of solid particles are similar to those of loquid particles. However, the collection efficiency of solid particles decreases with mereasing particle diameter for the particles greater than the actual cut-off size of the impactor. The particle collection efficiency increases with increasing sampling flow rate at the same particel size. However, the collection efficiency curves seem not to be greatly shifted with the flow rate. The stage responses obtained by direct measurements in this work are in good agreement with those derived from the collection efficiency curves for single stage.

• 대한토목학회논문집
• /
• 제36권1호
• /
• pp.143-149
• /
• 2016

본 연구에서는 지오그리드로 보강된 자갈도상재료들의 전단거동을 대형직접전단시험과 개별요소법을 기반으로 한 PFC 3D프로그램을 사용하여 검토하였다. 직접전단시험은 각기 다른 입도분포를 갖는 자갈도상에 대해 실험을 수행 하였다. 실험 결과, 지오그리드로 보강되지 않은 경우 입경이 큰 입자가 많은 입도분포를 갖는 재료의 전단강도가 증가함을 확인한 반면, 지오그리드로 보강된 경우에는 전단강도 변화가 지오그리드 입자 크기와 입도분포에 따라서 증가 혹은 감소하는 경향을 보였다. 개별요소수치해석을 통해서 실험 결과를 검증하고자 하였으며 이를 위해서 실제 사용된 지오그리드 인장강도를 갖도록 미시 물성치를 민감도 분석을 통해 확보 하였으며, 각기 다른 격자 크기를 가진 지오그리드에 동일하게 적용하여 도상재료 입도분포에 따른 상관관계를 비교하여 보았다. 해석결과 입도분포에 따라 적합한 보강효과를 보이기 위해서는 그에 적합한 지오그리드의 격자크기가 형성됨을 확인하였으며, 평균입자크기에 비해 최소 2배 이상의 격자크기가 확보되어야 하는 것으로 확인하였다. 지오그리드의 영향범위가 일정한 깊이 내에 형성되는 것을 확인하였다.