• Journal of the Korean Society of Costume
• /
• v.55 no.2 s.92
• /
• pp.116-128
• /
• 2005

The aim of this study is to understand problems with both fit and sizing system of gloves by analyzing the glove production industries with an emphasis on the sizing system, production measurement system, and general marking situation. Also, to suggest the basic raw materials for improving sizing system for gloves, actual glove control sizes were compared to the anthropometric data of the previous study Fifteen domestic production companies were participated in this study-Domestic glove production companies established their own sizing system by copying inter-national brand's glove sizing system or by their experience. The Korean Standard of gloves and the 1997 Korean Standard Anthropometrics Measurement for producing glove patterns are not considered because of its discordance with the reality of the required measurements. Domestic glove production companies used different size designation and labeling system. Size measurement unit also showed difference among the glove production companies. Some companies used 'cm', some used 'mm', some used 'inch' for the measurement unit. In general, companies produced 5 to 4 sizes in one design of glove and the production was the highest in M and L size. In 9 out of 15 companies preferred control size as hand length and hand circumference. For reference size, most of the companies preferred finger circumference, finger length, palm length, hand breadth, crotch height, and hand thickness. Actual glove sizes were compared to the anthropometric data of the previous study. The results indicated that most of the measurements of actual glove sizes were significantly larger than the anthropometric data.

• Hwankyungkyoyuk
• /
• v.21 no.3
• /
• pp.48-58
• /
• 2008

The purpose of this study was to investigate the influences of environmental education program through various instructional media on pro-environmental attitudes of forth graders in an elementary school in Seoul. The students were divided into an experimental group and a control group. A questionnaire was used to survey the effects of applying environmental education program through various instructional media. The SPSS 12.0 program was used to analyze the results. The student in the experimental group acquired a higher level of pro-environmental attitudes than the control group did. The environmental education program through various instructional media used in this study were effective especially in dealing with the environmental educational subdomains such as verbal commitment, actual commitment, affect. The major results of this study were as follows. First, environmental education program through various instructional media had a positive effect on the environmental concerns and needs for learning of environmental problems. Second, the group by environmental education program through various instructional media showed the significant difference(p<.001) on the pro-environmental attitudes as it proved those are effect on 3 subdomains of verbal commitment, actual commitment and affect. Third, environmental education program through various instructional media had a positive correlation(from 585 to .680) among the 3 subdomains of verbal commitment, actual commitment and affect. So, students who hold verbal commitment showed good effect on the actual commitment and affect. In conclusion, the environmental education program through various instructional media had a positive effect on pro-environmental attitudes of elementary school students. It is demanded that more intensive research on this study should be done, linking with teaching and teaming method, as a follow-up activity.

• Journal of Drive and Control
• /
• v.13 no.1
• /
• pp.84-88
• /
• 2016

• The Korean Journal of Emergency Medical Services
• /
• v.11 no.2
• /
• pp.19-27
• /
• 2007

Purpose: By identifying the actual profile of emergency medical personnel's pre-admission infection control practices, this study intended to provide a basic reference material for the improvement and reorientation of pre-admission infection control measures, and thereby help establish an effective plan for pre-admission infection control activities. Methods: Total 119 EMT's working for Jeollabuk-do Provincial Fire Defense HQ were asked to join a structured questionnaire survey from June to August 2006. Results: 1. It was found that 56.1% respondents answered no guideline available on the prevention of infection. Out of our rescue brigade members who knew about relevant guideline available, 34.2% respondents answered that their department conducted quality control program for the guideline. 2. For protective outfit in emergency practice, it was found that most respondents put on gloves or nothing at all(38%), which was followed by sterile gloves(29.2%), disposable mask(26.9%), gown(4.3%) and protective goggle(1.6%). And it was noted that all respondents(100%) washed out any clothing contaminated with somatic secretion on their own. 3. For a question about any experience in emergency activities exposed to infectious diseases, it was found that most of all respondents(77.9%) answered 'No', which was followed by 'Don't Know'(18.6%) and Yes(3.9 %). 4. For a question about any experience in inquiring of patients about infectious diseases, it was found that most respondents(49.4%) answered 'Yes' and 'Sometimes'(9.1%). It was noted that 20.2% respondents had extra medical examination in medical institution in terms of whether they were exposed to infectious diseases, apart from regular medical examination. Conclusions: In order to protect 119 EMT's from infectious diseases, it will be necessary to acquire emergency medical staffs specializing in infection control and organize corresponding personnel training units to keep providing reorientation and evaluation. In addition, it will be also necessary to supply them with a full set personal protection apparatuses and other equipments required for disinfection and sterilization.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.60-63
• /
• 1997

A new approach to the position sensor elimination of PM synchronous motor drives is presented in this study. Using the position sensing characteristics of PMSM itself, the actual rotor position as well as the machine speed can be estimated by adaptive flux observer and used as the feedback signal for the vector controlled PMSM drive. The adaptive speed estimation is achieved by model reference adaptive technique. The adaptive laws are derived by the Popov's hyperstability theory and the positivity concept. In order to verify the effectiveness of the proposed scheme, computer simulations are carried out for the actual parameters of a PM synchronous motor and the results well demonstrate that the proposed scheme provides a good estimation value of the rotor speed without mechanical sensor. It is also shown that the actual rotor position as well as the machine speed can be achieved under the variation of the magnet flux linkage. Since the flux linkages are estimated by the adaptive flux observer and used for the identification of the rotor speed, robust estimation of the rotor speed can be performed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.6
• /
• pp.556-565
• /
• 2004

We have experimented an actual solar water heating system acquiring real data for one year period. On the basis of the operation data, it is necessary to predict the system performance such as collector efficiency and solar fraction, and to analyze the economical efficiency for system optimal design. To estimate the performance of actual systems through simulation, valid modelling for components consisting of the system should be accompanied. The present study is focused on the modelling for load patterns and operating control conditions. We proposed two load models: concentration model which gathers real loads as a meaningful group and distribution model which disperses real loads with time. If grouping of the load distribution is suitable, the predicted values by the concentration model approaches to those by the distribution model close to actual load pattern apparently. As a result, both of them are in good agreement with those by experiment.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.1229-1234
• /
• 2001

The bottom slab of Inchon LNG in-ground #213 tank is designed as a massive structure witch has a large depth and section. The purpose of this study is to determine the optimum mix design having good workability and low hydration heat for bottom slab concrete and to control the actual concrete quality in site. For this purpose, we select the optimum mix design used ternary blended cement(furnace slag cement＋fly ash) and design factors. As test results of actual application, we have finish placing the bottom slab concrete of 23,180㎥ during 68hours with good success and obtain the good quality of fresh and hardened concrete including slump, air contents, no-segregation, compressive strength and low hydration heat in actual data. All test results are satisfied with our specifications for bottom slab concrete and we cut costs as the use of ternary blended cement and the reduction of placing hours.

• Journal of Korean Institute of Industrial Engineers
• /
• v.38 no.1
• /
• pp.41-45
• /
• 2012

Until now, most studies of foot moving or driving posture have been performed under laboratory driving conditions. But there are many different things between actual driving conditions and laboratory driving conditions because, in laboratory conditions, it is hard to consider vehicle's noise, vibration and people's psychology state while driving. Thus this study is performed through actual driving conditions. And while driving test, we recorded driver's foots with 2 cameras to investigate foots(left and right) heel point and how human foots move to control the three pedals : accel, brake and footrest.. Through driving test, the results of this study show that the position of driver's heel point isn't related to stature and tends to be generalized.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.181-183
• /
• 2002

Complete load model of the substation not only should include the performances of the load components, but also should take into consideration the core losses of transformers, the line losses and the capacitor banks. In an actual distribution system, the control scheme of capacitor banks are so complex and is difficult to identify actual values for the reactive powers of capacitor banks. This research improves on this drawback by applying component-based modeling method including a capacitor banks in distribution systems. Initial differences between the model results and the actual values for reactive powers are later decreased by the proposed method.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.947-948
• /
• 2006

This paper proposes a robust posture stabilization control method for wheeled mobile robots. To solve the robust posture stabilization, we introduce reference generation mode, reference tracking mode, and reference regulation mode. In reference generation mode, a kinematic time-invariant controller is used to generate the reference trajectory which starts from the initial posture of the actual robot to the desired posture. In reference tracking mode, a sliding mode position controller is employed in such a way that the actual robot can follow the reference trajectory in the desired forward or backward moving direction, even in the presence of the disturbances in the dynamics. In reference regulation mode, a sliding mode heading direction controller is used such that the actual robot can maintain the desired posture against the disturbances. In this way, robust posture stabilization can be achieved at almost all global regions.