• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.146-154
• /
• 2000

An $H\infty$ controller is designed for active suspensions of vehicles using 7-degree-of-freedom full-car model. Its performance robustness as well as stability robustness to system parameter variations and unmodelled dynamics are assured through the $\mu$-framework. The performance of the $H\infty$ controller is compared with that of a LQC controller in compute simulations. From the simulations it is found that the active suspension with the $H\infty$ controller reduces the acceleration and motion of the sprung mass in the heaving rolling and pitching directions when the car is driven on a normal road or through an asymmetric bump. The suspension stroke and the road holding capability are also improved with a relatively small level of power consumption. Overall the $H\infty$ controller shows a more robust performance than that of the LQG design.

• Journal of KSNVE
• /
• v.5 no.4
• /
• pp.525-536
• /
• 1995

In this study, an ROC(Reduced Order Controller) is designed to increase the flutter velocity of an aircraft wing, and the effect of ROC on the flight performance is also analyzed. The aircraft wing used in the paper is modelled as a 3 DOF two-dimensional rigid body. In the disign of controller, LQG and BACR(Balanced Augmented Controller Reduction) strategy is used as control algorithm and controller reduction method respectively. Simulation has been conducted to evaluate the effectiveness of ROC on the active flutter control, compared to FOC(Full Order Controller). It has been found that ROC using BACR is much effective than FOC in the sense of computation effort, without sacrificing the active flutter control performance.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.3
• /
• pp.120-129
• /
• 2001

A two-degree-of-freedom quarter-car model is used as the basis for LQ and the proposed controller design for a semi-active suspension. The LQ controller results in the best rms performance trade-offs(as defined by performance index) between ride, handling and packaging requirements. In LQ controller, however, the conflict between road holding and ride comfort remains. The adaptive semi-active suspension control based on the road frequency are introduced in this paper. With this method, the trade-off between road holding and ride comfort can be relaxed. The road frequency is estimated by wavelet transform if rattle space signal. The simulation results show that the proposed controller is superior to the conventional LQ controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1975-1980
• /
• 2004

A parallel active power filter is designed and implemented to compensate for undesired current harmonics generated by a nonlinear load. The filter works based on PWM strategy and control signal is generated using a model predictive controller. To evaluate the achievements, a PI controller is also designed and implemented. Experimental results indicate about 50% increase in the efficiency over PI controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.888-891
• /
• 1996

The objective of a mixed H$_{2}$/H$_{\infty}$ controller of active suspension system is to achieve not only the general performance improvement(H$_{2}$) but also the worst case disturbance rejection(H$_{\infty}$). In this paper, a mixed H$_{2}$/H$_{\infty}$ controller for an active suspension system, comparing the performance with that of an H$_{2}$ controller and of an H$_{\infty}$ controller.ler.EX> controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.75.4-75
• /
• 2001

This paper designs the robust hybrid controller for the multi degree-of-freedom system having uncertainty caused by modeling error and disturbances. The controlled plant is the construction which has an active dynamic vibration absorber on the top and is excited by the El Centre earthquake at the base. The active controller designed by the LQR(Linear Quadratic Regulator) and H-infinity control theory. The robustness of the hybrid H$\infty$ controller is compared with that of the hybrid LQ controller from computer simulation.

• Smart Structures and Systems
• /
• v.5 no.3
• /
• pp.261-277
• /
• 2009

A fuzzy-sliding mode controller is presented to control the dynamics of semi-active suspension systems of vehicles using magneto-rheological (MR) fluid dampers. A full car model is used to design and evaluate the performance of the proposed semi-active controlled suspension system. Four mixed mode MR dampers are designed, manufactured, and integrated with four independent sliding mode controllers. The siding mode controller is designed to decrease the energy consumption and maintain robustness. In order to overcome the chattering of the sliding mode controllers, a fuzzy logic control strategy is merged into the sliding mode controller. The proposed fuzzy-sliding mode controller is designed and fabricated. The performance of the semi-active suspensions is evaluated in both the time and frequency domains. The obtained results demonstrate that the proposed fuzzy-sliding mode controller can effectively suppress the vibration of vehicles and improve their ride comfort and handling stability. Furthermore, it is shown that the "chattering" of the sliding mode controller is smoothed when it is integrated with a fuzzy logic control strategy. Although the cost function of the fuzzy-sliding mode control is a slightly higher than that of a classical LQR controller, the control effectiveness and robustness are enhanced considerably.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.222-228
• /
• 2003

Lane departure avoidance system is one of the key technologies for the future active-safety passenger cars. The lane departure avoidance system is composed of two subsystems; lane sensing algorithm and active-steering controller. In this paper, the road image is obtained by vision sensor and the lane parameters are estimated using image processing and Kalman Filter technique. The active-steering controller is designed to prevent the lane departure. The developed active-steering controller can be realized by steer-by-wire actuator. The lane-sensing algorithm and active-steering controller are implemented into the steering HILS(Hardware-In-the-Loop Simulation) and their performance is evaluated with a human driver in the loop.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.79-86
• /
• 1997

The need for an active exhaust moise controller has been growing as an reinforcement of exhaust noise regulation, high power output and improvement of average fuel economy. In this study, for development of this active exhaust noise controller, the implementation of a composition of realtime control algorithm for active exhaust noise control and the construction of simulator for realtime control algorithm for active exhaust noise control has been investigated. Also, in order to implement active exhaust noise control with this simulator, the feasibility model for control of vehicle exhaust noise control is suggested.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.338-344
• /
• 1996

In this paper, a semi-active suspension adapting to road variation which also considers the frequency snesitivity of human is proposed. First, a road adapting controller composed of system identification and LQG control is designed. Using the extended least squares method, the road property is estimated by system identification as it varies, and the LQG controller considering the estimated road property and the frequency sensitivity of human is designed. Next, the semi-active suspension is made, which tracks the performance of the active suspension with the road adapting controller. Through numerical simulation, the performance of the proposed semi-active suspension is compared with that of a non-adaptive semi-active suspension with frequency-shaped performance index. As a result, we see that the road adapting semi-active suspension has better performance.