• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.29-38
• /
• 2017

This paper presents a study on the state-of-charge (SOC) reference based active cell balancing in real-time. The optimal references of SOC are determined by using the proposed active cell balancing system with the bidirectional DC/DC converters via the dual active bridge (DAB) type. Then, the energies between cells can be balanced by the power flow control of DAB based bidirectional DC/DC converters. That is, it provides the effective management of battery by transferring energy from the strong cell to the weak one until the cell voltages are equalized to the same level and therefore improving the additional charging capacity of battery. In particular, the cell aging of battery and power loss caused from energy transfer are considered. The performances of proposed active cell balancing system are evaluated by an electromagnetic transient program (EMTP) simulation. Then, the experimental prototype is implemented in hardware to verify the usefulness of proposed system.

• 전자공학회논문지
• /
• 제52권5호
• /
• pp.58-65
• /
• 2015

본 논문에서는 신경 관련 인공 전자기기를 위한 신경 자극 집적회로를 $0.18-{\mu}m$ 표준 CMOS 반도체 공정을 이용하여 설계하였다. 제안 된 신경 자극 회로는 12.8-V 전원을 사용하면서 $10-k{\Omega}$의 부하에 최대 1 mA의 전류까지 전달이 가능하다. 표준 CMOS 공정 기술로 구현을 위해서 저전압 트랜지스터만을 이용하여 설계를 하였고, 고전압에서의 안정적인 동작을 위하여 트랜지스터 스태킹 기술을 적용하였다. 또한, 신경 자극 동작 후 전하 잔여량이 남아 있지 않도록 active charge balancing회로를 포함하였다. 제안 된 단일 채널 자극 집적회로의 경우 디지털-아날로그 변환기, 전류 출력 드라이버, 레벨 시프터, 디지털 제어 부분, 그리고 active charge balancing 회로까지 모두 포함하여 전체 칩 레이아웃 면적은 $0.13mm^2$을 차지하며, 다중 채널 방식의 신경 자극 기능의 체내 이식용 인공 전자기기 시스템에 적용을 하는데 적합하다.

• 전력전자학회논문지
• /
• 제26권1호
• /
• pp.9-15
• /
• 2021

In multi-string light-emitting diode (LED) driver system, current balancing is crucial because the brightness of LED is directly related to its forward current. This paper presents a novel LED current balancing topology using current-fed Z-source converter. With the proposed structure, currents flowing through two LED strings are automatically balanced owing to the charge-balance condition on capacitors. Operation of the proposed converter is simple and the proposed converter uses only one active switch and one diode. Moreover, low-side gate driving can be used to operate the active switch. To verify the operation of the proposed LED current balancing converter, a prototype is built and tested with different numbers of LEDs.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 추계학술대회 논문집
• /
• pp.7-8
• /
• 2015

In this paper a cell-to-cell fast charge balancing circuit for the Lithium-Ion battery module is proposed. In the proposed topology the energy in a high voltage cell is transferred directly to a low voltage cell through the operation of the dc-dc converter. Furthermore, the charge balancing can be performed regardless of the battery operation whether it is being charged, discharged or relaxed. The monitoring circuit composed of a DSP and a battery monitoring IC is designed to monitor the cell voltage and detect the inferior cell thereby protecting the battery module from failure. In order to demonstrate the performance of the proposed topology, a prototype circuit was designed and applied to 12 Lithium-Ion battery module. It has been verified with the experiments that the charge equalization time of the proposed method was shorter compared with those of other methods.

• 전력전자학회논문지
• /
• 제26권1호
• /
• pp.66-73
• /
• 2021

This study presents a novel four-channel light-emitting diode (LED) current balancing topology using a current-fed hybrid quasi-Z-source converter. With the proposed structure, currents flowing through four LED strings are automatically balanced owing to the charge (amp-sec) balance condition on capacitors. Thus, automatic current balancing of the proposed driver is simple and precise. In addition, the proposed LED driver uses only one active switch and three diodes. The operating principle and characteristics of the proposed four-channel LED driver are analyzed in detail. To verify the operation of the proposed LED driver, a prototype is built and tested with different numbers of LEDs.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.569-583
• /
• 2013

In this study, the simultaneous use of a multi-level converter (MLC) as a DC-motor drive and as an active battery cell balancer is investigated. MLCs allow each battery cell in a battery pack to be independently switched on and off, thereby enabling the potential non-uniform use of battery cells. By exploiting this property and the brake regeneration phases in the drive cycle, MLCs can balance both the state of charge (SoC) and temperature differences between cells, which are two known causes of battery wear, even without reciprocating the coolant flow inside the pack. The optimal control policy (OP) that considers both battery pack temperature and SoC dynamics is studied in detail based on the assumption that information on the state of each cell, the schedule of reciprocating air flow and the future driving profile are perfectly known. Results show that OP provides significant reductions in temperature and in SoC deviations compared with the uniform use of all cells even with uni-directional coolant flow. Thus, reciprocating coolant flow is a redundant function for a MLC-based cell balancer. A specific contribution of this paper is the derivation of a state-space electro-thermal model of a battery submodule for both uni-directional and reciprocating coolant flows under the switching action of MLC, resulting in OP being derived by the solution of a convex optimization problem.

• 한국인터넷방송통신학회논문지
• /
• 제17권5호
• /
• pp.199-208
• /
• 2017

리튬 폴리머 배터리는 높은 안전성, 빠른 충전 및 긴 라이프 사이클 등으로 인해 에너지 저장치(ESS: Energy Storage System), 전기자동차(EVs: Electric Vehicles)등에 채택이 되어 사용되고 있으며, 그리고 현재는 농업용 드론에서 까지 사용이 되고 있다. 그러나 리튬 폴리머 배터리는 과충 방전에는 리튬-이온 배터리 내의 격차구조가 파괴되어 배터리 수명이 줄어들게 되며, 과충 방전을 방지하기 위해 불균등한 셀 전압을 균등 제어 할 수 있는 셀 밸런싱 시스템이 필수적이다. 본 논문은 각 셀의 충 방전할때의 전압차이를 검출하여 불균형된 셀을 확인하여 비선형 시스템에 적합한 퍼지 제어기를 개발하여 적용한 셀별 밸런싱 알고리즘을 제안한다. 본 논문은 농업용 드론의 배터리팩의 셀 밸런싱을 퍼지제어를 하여 셀 간 균등 제어를 위해 설계하였으며, 최종 결과로 셀 간 밸런싱이 잘 되는지 확인하고 자 셀이 2개 있을 때와 6개 그리고 최종적으로 12개의 각 셀 밸런싱이 되는지를 확인하였다. 이는 다른 제품에도 사용할 수 있는지를 실험하고자 하였으며, 확인결과 사용된 셀의 개수와는 관계없이 셀별 밸런싱이 잘 되고 있음을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.212-213
• /
• 2017

In this paper is presented a pre-charging sequence for single-phase cascaded neutal-point-clamped(NPC) converters for capacitors voltage balancing. capacitor imbalance problem in pre-charge sequence is caused in cascaded NPC converter by its topology. the DC link voltage at each NPC converter module can be balanced by the proposed switching method. the design and performance of the proposed sequence are verified by simulation and experimental results using prototype.

• 전기학회논문지
• /
• 제66권2호
• /
• pp.292-299
• /
• 2017

In this paper, multiple ESS(Energy Storage System) control strategy for microgrids is presented. Installation of ESS becomes mandatory when microgrids are used to supply high quality power to the loads. The one of main functions of the ESS is to maintain power balance. However ESS has limitation of its capacity and instantaneous injecting power. Power allocation method based on SOC(State Of Charge) of each ESS is proposed. P-Q control is employed as the basic control strategy for the distributed ESSs. By using the proposed method, the coefficients in the conventional P-Q control method are modified. The ESSs with higher SOC inject more active power, while those with lower SOC inject less, leading to more balanced SOC levels among the ESSs. The proposed method is demonstrated by simulation using PSCAD/EMTDC.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.387-388
• /
• 2020

본 논문은 패시브 셀 밸런싱과 액티브 셀 밸런싱의 에너지 손실 비교에 관한 연구내용이다. 패시브 셀 밸런싱은 저항을 이용하여 과충전된 셀의 에너지를 소모하는 방식이며 액티브 셀 밸런싱은 SSC(Single Switched Capacitor) 구조를 이용하여 높은 에너지 셀의 에너지를 낮은 에너지 상태의 셀로 전달하는 방식이다. 높은 셀과 낮은 셀의 SOC(State Of Charge)의 차이가 5% (0.085 V)일 때 ∆SOC = 3% (∆V = 0.051 V)로 줄이기 위해 패시브 셀 밸런싱과 액티브 셀 밸런싱을 하여 두 셀 밸런싱의 에너지 손실 차이를 시뮬레이션과 실험을 통하여 비교한다.