• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.7
• /
• pp.759-766
• /
• 1988

the effect of heat treatment in oxygen ambient on the nucleation and growth of oxidation induced stacking faults(OSF) in n-type(100)silicon wafer has been investigated. The growth of OSF is determind as a function of oxygen concentration in silicon wafer, heat treatment time and temperature, and the activation energy for the growth of OSF can be obtained from the growth kinetics. The activation energies are respectively 2.66 eV for dry oxidation and 2.37 eV for wet oxidation. In this paper, we have also studied the structural feature of OSF with the comparison of optical microscopic morphology and crystalline structure.

• Journal of the Korean Ceramic Society
• /
• v.26 no.4
• /
• pp.471-478
• /
• 1989

In this study we investigated the gelation time of sol which containing mixtures of TEOS with H2O, ethanol, HCl in the preparation of monolithic silica glass through Sol-Gel method. In this case apparent activation energies were observed by Arrhenius equation. We investigated the conversion from gel to glass in drying and heat treatment stages using DT-TG, FT-IR, XRD analysis and dried gel conversed to glass by heat treatment up to 85$0^{\circ}C$. The results of this experiment showed that the gelation time of solutions were promoted when increasing the amount of addition of H2O and HCl catalyst for TEOS and high reaction temperature of solution.

• Journal of Technologic Dentistry
• /
• v.14 no.1
• /
• pp.95-118
• /
• 1992

Glass ceramics for crown were prepared by adding 3$\sim$11 wt% TiO2 to the weight percent composition of 34.7 CaO, 27.8 SiO2, 18.3P2O5, 12.6MgO and 6.6 TiO2. The starting glasses were prepared by melting the powdered batch in alumina crucible at 1350$\sim$1400 for 1 hr and then quenching into a distilled water. The nucleation and crystallization of the crystalline glass ceramics for crown were studied by DTA, SME and X-ray diffraction analysis. Frit containing 9.11 wt% TiO2 had crystallization temperature of 850$\sim$1075 and major crystalline phase was identified by X-ray diffraction as diopside(CaO-MgO-2SiO2). Activation energies for the crystallization processes were obtained from DTA by varing rates for the fits, and were calculated from modified Ozawa and Kissinger equations. Activation energy for the crystallization processes of the S-4 frit was 489.6 KJ/mol.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.466-473
• /
• 2004

We have used FT-IR spectra to explain the effects of hydrogen bonding between chitosan and polycaprolactam (PA6). A dynamic mechanical analysis study suggested that the optimum chitosan and PA6 miscibility under the conditions of this experiment were obtained at a blending ratio of 40:60. We studied the thermal degradation of chitosan blended with PA6 (chitosan/PA6) by thermogravimetric analysis and kinetic analysis (by the Ozawa method). Dry chitosan and PA6 exhibited a single stage of thermal degradation and chitosan/PA6 blends having> 20 wt% PA6 exhibited at least two stages of degradation. In chitosan/PA6 blends, chitosan underwent the first stage of thermal degradation; the second stage proceeded at a temperature lower than that of PA6, because the decomposition product of chitosan accelerated the degradation of PA6. The activation energies of the blends were between 130 and 165 kJ/mol, which are also lower than that of PA6.

• Elastomers and Composites
• /
• v.23 no.3
• /
• pp.213-222
• /
• 1988

The thermal decomposition of poly(n-butyl methacrylate)(Pn-BMA) was studied using a dynamic and isothermal thermogravimetry in nitrogen gas with 50ml/min at several heating rates from 1 to $20^{\circ}C/min$, and at several heating temperature from 320 to $370^{\circ}C$. The mathematical techniques used for calculation of activation energy were Kissinger, Anderson, Chatterjee-Conrad, Friedman, Fuoss, Ozawa and isolthermal method. The range of activation energies obtained using the several techniques was between 43 and 51Kcal/mol except Chatterjee-Conrad and this range agreed with each other very well. The thermal degradation of Pn-BMA was considered to be carried out by main chain scission.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.12-15
• /
• 1993

The correlation between electrical conduction and dielectric relaxation properties of copper ion conducting glasses is discussed. The glasses were prepared in the system $CuI-Cu_2S-Cu_2O-MoO_3$ using rapid quenching technique. These glasses have high ionic conductivities at room temperature in the range of $10^{\circ}$[S/m], and the conductivities increase with increasing CuI content. The activation energies for conduction are 0.26 - 0.57 eV. The dielectric relaxation times are 1 - 10uS, and the activation energy for ion jumping are 0.18 - 0.41eV. It is shown that the tendency of conduction properties depending on composition of the glass is similar those of dilectric relaxation.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.546-549
• /
• 1993

The correlation between electrical conduct ion and dielectric relaxation properties of copper ion conducting glasses is discussed. The glasses were prepared in the system $CuI-Cu_2S-Cu_2O-MoO_3$ using rapid quenching technique. These glasses have high ionic conductivities at room temperature in the range of $10^{circ}$[S/m], and the conductivities increase with increasing CuI content. The activation energies for conduction are 0.26-0.57 eV. The dielectric relaxation times are 1-10uS, and the activation energy for ion jumping are 0.18-0.41eV. It is shown that the tendency of conduction properties depending on composition of the glass is similar those of dilectric relaxation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.6
• /
• pp.1135-1139
• /
• 1997

Major factors inhibiting nonenzymatic browning in stored ginger paste were investigated using aqueous model systems with temperature, water activity, pH and sulfur compounds. Browning index and total gingerols were measured during storage. The rate of nonenzymatic browning reactions showed a strong depencence on temperature and pH and a negligible influence on water activity. It was also reduced by the addition of 0.04% N-actyl-L-cysteine(NAcCys), effectively. Activation energies for aqueous ginger model systems with and without 0.04% NAcCys were 29.0 and 25.8kcal/mole, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.469-473
• /
• 1994

The E-and Z-isomers of 1-methyl-l-phenyl-2-neopentylsilene, generated by the sealed tube thermolyses of their anthracene adducts are stereospecifically trapped by trimethylmethoxysilane to give diastereomeric adducts. The temperature dependence of the ratio of the two diastereomers obtained when the silene formed from the pure E-or Z-anthracene adduct was trapped at higher temperatures permitted the determination of an activation energy for the silene isomerization. The activation energies for the E-to Z-and Z-to E-silene isomerization are $45{\pm}$6 and $20{\pm}4$ kcal $mol^{-1}$, respectively. The significance of these values is discussed.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.191-195
• /
• 1988

The effect of some thiosemicarbazide derivatives on corrosion of aluminium in 2M sodium hydroxide has been studied using thermometric, weight loss and hydrogen evolution techniques. The rate of the corrosion depends on the nature of the inhibitor and its concentration, heated of hydrogenation, mode of interaction with the metal surface and formation of metallic complexes. The compounds are weakly adsorbed on the surface of aluminium and form a monolayer of the adsorbate. Values of the Arrhenius activation energies indicate agreement with those obtained for an activation controlled process.