• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.70-79
• /
• 2020

The main objective of this research to develop an IoT based wireless contactless ultrasonic system (ICUS) and its application to concrete structure. The developed system consists of 16 mems, 2Mhz digitizer, amplifying circuit, FPGA, and wifi module, enabling to measure leaky surface waves from concrete specimens without physical coupling process and wires. Multi-channel analysis is performed to improve the accuracy of data analysis, and the velocity of leaky surface waves and acoustics are derived. Field inspection of railroad concrete sleepers is conducted to evaluate the performance of the system and to compare the results with conventional ultrasonic pulse velocity (UPV). As a result of the field inspection, UPV was limited to evaluate damages. This is because crack pattern of railroad sleepers is parallel to ultrasonic ray path and accessibility of the railroad at the field is disadvantageous to contact-based UPV. On the other hand, ICUS possibly detect the damages as reduction of dynamic modulus by up to 59% compared to non-damaged specimen.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.6
• /
• pp.509-523
• /
• 2012

The sound quality based on design optimization, throughout the development process of various electronic office equipments, needs to be considered in order to respond the increased needs for the emotional satisfaction of customers in terms of psycho-acoustics. This paper focuses on how to describe the characteristics of operating sound radiated from laser printers by using various sound attributes, and to model the sound quality index that can properly evaluate the subjective preference on modification conditions in the improvement study quantitatively. Especially, the proposed verification process, in the form of combining the correlation based method and the decision error based method, was applied to improve the generality and reliability of a group of participants in the jury evaluation. The modified Aures tonality model was also proposed to improve the correlation coefficient with the mean response of participants by optimizing some parameters. As a result, the loudness, articulation index, roughness, tonality, fluctuation strength were used to model the sound quality index for laser printers by using the multiple-linear regression method. Through the improvement study, it was confirmed that replacing the absorbing materials is effective to reduce the tonalness radiated from the side of a reference printer model. Based on above results, it can be concluded that the proposed model has enough usefulness as quantitative evaluation index to evaluate the difference between modification conditions in the improvement study.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.1
• /
• pp.27-34
• /
• 2016

The type of ultrasound transducer used influences the quality of a reconstructed ultrasound image. This study analyzed the effect of transducer type on ultrasound computed tomography (UCT) image quality. The UCT was modeled in an ultrasound simulator by using a 5 cm anatomy model and a ring-shape 5 MHz 128 transducer array, which considered attenuation, refraction, and reflection. Speed-of-sound images were reconstructed by the Radon transform as the UCT image modality. Acoustic impedance images were also reconstructed by the delay-and-sum (DAS) method, which considered the speed of sound information. To determine the optimal combination of transducers in observation, point-source, flat, and focused transducers were tested in combination as trasmitters and receivers; UCT images were constructed from each combination. The combination of point-source/flat transducer as transmitting and receiving devices presented the best reconstructed image quality. In UCT implementation, the combination of a flat transducer for transmitting and a point transducer for receiving permitted acceptable image quality.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.479-479
• /
• 2018

하천의 수심, 유속, 하상경사, 하상재료, 만곡도 등과 같은 물리적 특성에 따라 생물서식처로서 다양한 특성을 나타내고 그 특성들에 의해 서식처의 유형을 구분할 수 있다. 이러한 서식처 유형에 따라 수중음향의 특성이 달라지며, 수중음향의 서식지의 양적 표시자로서 잠재력으로 인해 최근 많은 연구들이 시도되고 있다. 본 연구에서는 인공적인 영향을 적게 받은 자연하천으로 양양 남대천 12개 지점을 대상으로 하여 서식지의 형태에 따른 수중음향과 하천의 수리적 인자에 따른 관계를 파악하고자 하였다. 서식처 유형으로는 빠른 유속에 얕은 수심을 가지고 있는 여울(riffle), 수심이 깊고 유속이 느린 소(pool), 낙차가 있는 계단형 여울(step riffle)에 대해 조사하였다. 수중배경음은 여울과 계단형 여울이 유사하게 나타났으며 소는 상대적으로 낮은 배경음을 나타내었다. H2, H4, H5, H9, H10 지점은 여울 형태로 유속에 따라 H2, H5, H4, H9 지점 순으로 음압레벨이 낮아지는 경향을 보였으며, H10지점은 H9, H4 지점에 비해 낮은 유속임에도 높은 음압레벨을 보였다. 이는 H10 지점의 하상이 조도가 매우 큰 전석으로 이루어져 나타나는 현상으로 판단된다. H3, H6, H7, H8, H12 지점은 소 형태로 H12 지점을 제외하고 대체로 낮은 음압레벨을 보였으며, H3과 H6지점에서는 저주파수에서 높은 음압레벨을 보였다. 이는 수심이 깊은 경우 상류의 저주파수의 음파가 잘 전달되기 때문으로 판단된다. H1과 H11지점은 계단형 여울로 낮은 수심에서 빠른 유속을 가진 H11지점과 느린 유속을 가진 H1 지점에서 대체로 높은 음압레벨을 나타내었다. 이는 낙차에 의한 수중음향 발생에 의한 것으로 판단된다. 세 가지 유형에 따른 수중 음향을 비교하였을 때 음압레벨은 계단형 여울, 여울, 소 순서로 높게 나타났다. 결과적으로 수중음향이 서식처의 수리적 특성에 따라 다양한 특성을 나타내고 있으며, 이를 통해 생물서식처를 평가하기 위한 새로운 방법으로 수중음향의 활용 가능성을 제시하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.422-427
• /
• 2018

The purpose of this study is to investigate the effect of acoustic radiation force on the standing wave acoustic levitation phenomenon, which is the levitation of small objects near the pressure node of the standing wave, using the Bernoulli principle. The source and scheme of the acoustic radiation force, which is the cause of the levitation, are conceptually explained through comparison with the graph of the acoustic radiation force versus the distance from the transducer. A series of experiments supporting this explanation was performed with a BLT(Bolt-clamped Langevin Type) ultrasonic transducer to confirm that the objects are floating near the pressure nodes and that it satisfies the condition for the standing wave formation when the object is levitating. Furthermore, the vertical alignment of floating objects, which is a characteristic of standing wave acoustic levitation phenomenon, could be explained.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.6
• /
• pp.712-722
• /
• 2019

Objective : Although magnetic resonance guided focused ultrasound (MRgFUS) has been used as minimally invasive and effective neurosurgical treatment, it exhibits some limitations, mainly related to acoustic properties of the skull barrier. This study was undertaken to identify skull characteristics that contribute to optimal ultrasonic energy transmission for MRgFUS procedures. Methods : For ex vivo skull experiments, various acoustic fields were measured under different conditions, using five non-embalmed cadaver skulls. For clinical skull analyses, brain computed tomography data of 46 patients who underwent MRgFUS ablations (18 unilateral thalamotomy, nine unilateral pallidotomy, and 19 bilateral capsulotomy) were retrospectively reviewed. Patients' skull factors and sonication parameters were comparatively analyzed with respect to the cadaveric skulls. Results : Skull experiments identified three important factors related skull penetration of ultrasound, including skull density ratio (SDR), skull volume, and incidence angle of the acoustic rays against the skull surface. In clinical results, SDR and skull volume correlated with maximal temperature (Tmax) and energy requirement to achieve Tmax (p<0.05). In addition, considering the incidence angle determined by brain target location, less energy was required to reach Tmax in the central, rather than lateral targets particularly when compared between thalamotomy and capsulotomy (p<0.05). Conclusion : This study reconfirmed previously identified skull factors, including SDR and skull volume, for successful MRgFUS; it identified an additional factor, incidence angle of acoustic rays against the skull surface. To guarantee successful transcranial MRgFUS treatment without suffering these various skull issues, further technical improvements are required.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.2
• /
• pp.129-137
• /
• 2019

This study was conducted to investigate the effects of underwater noise caused by pile driving during marine construction on fish. In this study, the three gray rockfish were released about 1 km away from the construction site of wind power generation on July 18, 2018 and traced using two acoustic telemetry techniques. The behavior of the fish was analyzed by calculating the moving distance, swimming speed and direction of the gray rockfish. In the results of the acoustic tracking using the ship, the rockfish moved about 2.11 km for about two hours at a speed of $0.28{\pm}0.14m/s$ (0.94 TL/s). The bottom depth of the trajectory of the rockfish was $1.0{\pm}0.6m$ on average. There was a significant directionality in swimming direction of the gray rockfish, and there was no significant correlation between the swimming direction and tidal current direction. Moving distance during 5 minutes (5MD) during pile driving and finishing operations between rock surface and bedrock were 0.94-0.96 times (76.0-77.0 m) and 1.81-2.73 times (146.0-219.5 m), respectively, compared with no pile driving. This study is expected to be used as a basic data of fish behavior research on underwater noise.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.3
• /
• pp.266-274
• /
• 2019

As can be seen in the statistics on domestic performance facilities, small or large scale of acoustic renovations seem to be unavoidable in many of those facilities due to its senility. However it is hard to find case studies which can be referred to for its acoustic renovation process. This study tried to provide a case study example of acoustic renovation for a high school auditorium which has many restrictions as a cultural heritage building. Requirements from the client and acoustic problems found through a field measurement of existing space motivated acoustic design solutions and alternatives which can improve the acoustics of the space. The whole process from the initial stage of diagnosing acoustic problems to the final stage of a post acoustic evaluation after the completion of construction was described. The result from the post acoustic evaluation suggested that reverberation characteristics of the space as well as definition and clarity have been greatly improved by applying acoustic design solutions and alternatives. However, loudness of sounds in the space didn't reach the aimed level, which is due to the limited capability of slat ceiling structure for providing strong early reflections.

• Journal of the Korean Institute of Educational Facilities
• /
• v.28 no.3
• /
• pp.3-14
• /
• 2021

Speech information of teachers is transmitted to students in classrooms so that appropriate aural environment should be provided for academic purposes. Many researches have been undertaken for classroom acoustics, and acoustic standards of domestic classrooms were suggested based on the reverberation time and background noise level. However, these standards are suitable for middle and high schools and so not consider the auditory ability by ages. As a precedent research, the present study was begun to suggest an acoustic standard for lower grade elementary school classrooms with children under age 9 who have not normal auditory ability. In order to do this, acoustic performances of the lower grade classrooms were measured and compared with the general classrooms. Also, change of acoustic parameters depending on the desk layout was measured and analyzed. The measured acoustic parameters were background noise, signal to noise ratio, RT, STI, D₅₀, and IACC. As a result, it was found that background noise is exceed the standard of 35dB(A) at the schools along the road sides. Also, it was shown that most of acoustic parameters are higher in the classrooms built recently rather than the old classrooms. Generally, there are not much difference of acoustic parameters among the various desk layouts but, better acoustic performances are acquired at the center line and the seats near sound source. Also, Higher IACC was measured at the seats on the center line facing the source squarely.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.299-307
• /
• 2020

Since 1964, research and improvement projects on Gugak instruments have been carried out to modernize, standardize, and scientificize them, but their inherent problems of Gugak instruments have failed to produce significant results. It seems that one of the main reasons for this is that the study of instrumental acoustics on Korean traditional instruments was not preceded. In Gugak orchestra, Sogeum used in concertos and solo music is a musical instrument that plays the similar role in Western orchestras due to its clear tone and high sound range. In this paper, the sound colors of Sogeum and flute, which sound similar, were analyzed through the their harmonics distribution and sound structures of the instruments. This showed that the overall tone was richer and softer than Sogeum, and that the tones of the two instruments sounded similar due to the similar composition of harmonics. In the future, it is hoped that musical instrument acoustical researches on various Gugak instruments will continue to help popularize and globalize Gugak instruments.