• Journal of the Korean Society of Combustion
• /
• v.21 no.2
• /
• pp.29-37
• /
• 2016

This study described the experimental investigations of combustion instability in a model gas turbine combustor. Strong coupling between pressure oscillations and unsteady heat release excites a self-sustained acoustic wave, which results in a loud and annoyed sound, and may also lead to a structural damage to the combustion system. In this study, in order to examine the combustion instability phenomenon of a dual swirling combustor configuration, the information of heat release and pressure fluctuation period with respect to the variation in both thermal power and combustor length was collected experimentally. As a result, the fundamental acoustic frequency turned out to increase with the increasing thermal power without respect to the combustor length. The frequency response to the combustor length was found to have two distinct regimes. In a higher power regime the frequency significantly decreases with the combustor length, as it is expected from the resonance of gas column. However, in a lower power regime it is almost insensitive to the combustor length. This insensitive response might be a result of the beating phenomenon between the interacting pilot and main flames with different periods.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.198-204
• /
• 2003

A basic experiment was performed to control tile plant growth using acoustic emission technique considering the environmental conditions for plant. At a dry soil condition, the signals due to the cavitation from xylem of angiosperm and gymnosperm were mainly detected. The strong signal from xylem and the weak signal from plasmodesmata and casparian strip were detected at the same time after distilled water was provided. Two signals after providing tile acid and distilled water were contrary to each other. The wind, number of leaf, music, temperature and humidity affected the acoustic emission count from plants but the frequency ranges of the detected signals were the same.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.92-99
• /
• 2000

In this paper, theoretical acoustic sensitivity was derived to describe acousto-optic transduction property of the mandrel type fiber optic acoustic sensor with respect to external acoustic field. The acoustic sensitivity was analyzed in relation to both material properties and geometrical influence factors of the constitutional parts of the sensor, analytically. Validity of the theoretical results were verified through comparison with the finite element analysis results. The variation trends of the sensitivity of the sensor in relation to the studied parameters showed good agreement for the two analysis methods. According to the results, it is considered more economical to design the basic structure of the sensor with the analytic equations developed in this paper, and then to carry out further detailed analysis with the finite element method for specific points of design interest.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.10 s.115
• /
• pp.1057-1066
• /
• 2006

Acoustic streaming Induced by longitudinal vibration at 30 kHz is visualized for a test fluid flow between the stationary glass plate and ultrasonic vibrating surface with particle imaging velocimetry (PIV) To measure an increase in the velocity of air flow due to acoustic streaming, the velocity of air flow in a gap between the heat source and ultrasonic vibrator is obtained quantitatively using PIV. The ultrasonic wave propagating into air in the gap generates steady-state secondary vortex called acoustic streaming which enhances convective cooling of the stationary heat source. Heat transfer through air in the gap is represented by experimental convective heat transfer coefficient with respect to the gap. Theoretical analysis shows that gaps for maximum heat transfer enhancement are the multiple of half wavelength. Optimal gaps for the actual design are experimentally found to be half wavelength and one wavelength. A drastic temperature variation exists for the local axial direction of the vibrator according to the measurement of the temperature distribution in the gap. The acoustic streaming velocity of the test fluid in the gap is at maximum when the gap agrees with the multiples of half wavelength of the ultrasonic wave, which are specifically 6 mm and 12 mm.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.6
• /
• pp.103-109
• /
• 2017

An increase in acoustic energy in a combustion chamber coupled with heat fluctuations from flame results in the occurrence of combustion instability. The assessment of combustion stability requires the prediction of acoustic energy variation by understanding the acoustical characteristics of flow boundaries in a combustion chamber. The present paper discusses about the characteristics of acoustic impedances at boundaries in terms of Strouhal number and summarizes theoretical analyses on the acoustic characteristics of injector-head-like configurations. Also, the details of the two-microphone measurement technique have been presented.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.377-380
• /
• 2002

Acoustic Characteristics of Nitrile Butadiene Rubber with Carbon Black ContentAcoustic and mechanical properties of Nitrile Butadiene Rubbers (NBR) with the variation of the carbon black content were investigated. NBR where the acrylonitrile content is $33\%$ based on the mole percent has been prepared with fixed sulfur content for vulcanization. Acoustic measurement of the prepared rubbers were peformed in the frequency region of $300\;\~\;1000\;kHz$. Their mechanical properties such as density, hardness were also measured. Increase of the carbon black content in the rubber resulted in enhancement of the mechanical property and linear increase of the sound speed as function of the carbon black content. Interestingly, attenuation of the sound speed was only affected by the existence of the carbon black and not by the amount of carbon black in the experiment range of this article. In this study, it was found that the amount of carbon black content in the NBR was correlated with the acoustic properties and can be estimated nondestructively by the measurement of the specific acoustic property.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.10
• /
• pp.994-1002
• /
• 2012

Acoustic power transmission loss(TL) is an important performance of the muffler system. TL will be affected by the velocity of the fluid in duct since acoustic pressure varies according to the fluid velocity. In this paper, two kinds of fluid model, potential flow and turbulent flow, for the fluid flowing in simple expansion chamber are considered. The effects of their two fluid models in acoustic TL are investigated for the straight and L-shaped simple expansion chamber. In higher frequency range, the characteristics of TL of the two fluid models show different results. The variation of TL according to the fluid velocity is shown more distinctly when turbulence model is used. Turbulent flow model should be used to obtain better estimation of acoustic TL in higher frequency range.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.146-154
• /
• 2010

The effects of severe plastic deformation, equal channel angular pressing, and annealing of Al 5052 alloy on elastic modulus have been studied. The AI 5052 alloy was plastically deformed by ECAP method after solution treatment, and then finally annealing heat treated. Elastic modulus was measured by conventional tensile and nano-indentation test, and also measured on the surface of the specimen using acoustic material signature of the acoustic microscope. The variation in the elastic modulus influenced by plastic deformation and heat treatment, inaccessible by the conventional techniques, was successfully measured by acoustic material signature and obtained the elastic modulus depending on crystal orientation at each grain.

• MALSORI
• /
• no.38
• /
• pp.113-124
• /
• 1999

It is well known that Japanese prosodic structure assumes mora below the syllable tier. Syllables with V or CV structure are counted as having one morn whereas those with coda consonants /-pp, -tt, -kk, -ss, -N/ or long vowels are counted as having two morns in Japanese. This study measured the acoustic duration of these special moras ('tokusyuhaku') produced by Tokyo dialect speakers to see if they are isochronic with V or CV. It also examined the production of Korean(Seoul/Kyungsang dialect) and Chinese native speakers loaming Japanese as a second language to examine how the learners' first language influence their second language. Finally, it examined how speakers of the Akita dialect, which is blown as a syllabeme dialect in Japanese, produced them. The results showed that intra-speaker variation as well as inter-speaker variation was observed in the production by Akita dialect speakers. Production of native speakers of Chinese and Kyungsang dialect of Korean -- which have vowel length contrast in their phonological systems -- showed a similar result to Tokyo dialect speakers, which implies the influence of the learners' first language on the acquisition of the second language.

• Speech Sciences
• /
• v.8 no.1
• /
• pp.7-19
• /
• 2001

The acoustic parameters of nine Korean numbers were analyzed by Praat, a speech analysis software, and synthesized by SenSynPPC, a Klatt formant synthesizer. The overall intensity, pitch and formant values of the numbers were modified dynamically by a step of 1 dB, 1 Hz and 2.5% respectively. The study explored the sensitivity of listeners to changes in the three acoustic parameters. Twelve subjects (male and female) listened to 390 pairs of synthesized numbers and judged whether the given pair sounded the same or different. Results showed that subjects perceived the same sound quality within the range of 6.6 dB of intensity variation, 10.5 Hz of pitch variation and 5.9% of the first three formant variations. The male and female groups showed almost the same perceptual ranges. Also, an asymmetrical structure of high and low boundary was observed. The ranges may be applicable to the development of a speaker identification system while the method of synthesis modification may apply to its evaluation data.