• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.962-965
• /
• 2005

A high intensity progressive wave tube is installed at Korea Aerospace Research Institute (KARI) for acoustic environmental tests. The test facility has 700 mm x 800 mm cross-sectional area, and provides acoustic environment of 165 dB over the frequency range of $25Hz{\sim}10,000Hz$. The facility consists of a 6 m long acoustic wave tube, acoustic power generation systems, gases nitrogen supply systems, and acoustic control systems. This paper describes how the basic parameters of the facility and power generation systems are controlled to meet the requirement of the test. The shape and length of the tube has been designed by using the size of test objects and the wave propagation characteristics of the tube. The capacity of acoustic power generation systems is determined by the energy conversion of acoustic wave and the efficiency of acoustic modulators. Moreover, the paper introduces test run results of the tube. Overall of 163dB has been generated by using the test facility.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.867-872
• /
• 2002

A high intensity acoustic test facility is constructed at Korea Aerospace Research Institute (KARI) by 2003. The reverberant chamber of the facility has a volume of 1,228 cubic meters and shall provide an acoustic environment of 152 dB over the frequency range of 25 Hz to 10,000 Hz. The facility consists of a large scaled reverberant chamber, acoustic power generation systems, gases nitrogen supply systems, and acoustic control systems. This paper describes how the basic parameters of a chamber and power generation systems are controlled to meet the requirement of the test. The volume of a reverberant chamber is controlled by the size of test objects and the reverberant characteristics of a chamber. The capacity of acoustic power generation systems is determined by the energy absorption of a chamber and the efficiency of acoustic modulators. Simple math is employed to calculate the required power of acoustic modulators. Moreover, the paper explains how the distribution of sound pressure level at low frequency is checked by analytical and numerical methods.

• 제어로봇시스템학회논문지
• /
• 제19권9호
• /
• pp.755-759
• /
• 2013

A broad-band underwater acoustic transducer that uses thickness vibration mode, derived from a disk type piezoelectric ceramic, has been proposed and designed for DVL (Doppler Velocity Log). Three different types of acoustic transducer were evaluated with respect to the transmitting voltage response, receiving voltage sensitivity and bandwidth of the transducer. The effect of the acoustic impedance matching layer and backing layer is discussed. The results demonstrated that three matching layer with lossy backing layer is the best configuration for underwater transducer. The trial underwater acoustic transducer with three matching layer has a frequency bandwidth of 55%, maximum transmitting voltage response of 200 dB and a maximum receiving voltage sensitivity of -187.3 dB.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.770-774
• /
• 1994

The volume of an acoustic source is important in determining various acoustic parameters. One of the suggested techniques is the internal pressure method incorporating a loudspeaker attached to a chamber wall and a microphone inserted into the cavity. Although the method is easy to handle with a very simple measurement setup, the coupling effects between the dynamic system of the loudspeaker and acoustic field, and the effects of higher order modes introduced by the discontinuities in the acoustic field, and the effects of higher order modes introduced by the discontinuities in the acoustic field should be considered for precise result. In this study, higher order modes due to the discontinuities of loudspeaker and microphone boundaries are included and the electro-acoustic coupling effects are compensated for by using the results of two cylinders with different lengths. The volume velocity of a loudspeaker thus obtained agrees very with that measured by laser sensor.

• 한국음향학회지
• /
• 제11권2호
• /
• pp.59-67
• /
• 1992

기계구조물로부터 발생하는 소음을 부가적인 음을 발생하여 능동적으로 제어하는 문제는 오늘날 환경보전의 측면에서 중요한 여구과제가 되고 있다. 길이가 긴 무한덕트에 대한 능동소음제어에 대해 적응필터링 방법을 이용하여 많은 연구가 진행되고 있다. 반면 실제 기계구조물에 있어서 크기의 한계로 인해 덕트의 길이가 짧은 경우가 많으여 이 경우 덕트 내부의 반사나 공명과 같은 음향특성을 고려해 볼 필요가 있다. 본 논문에서는 길이가 짧은 덕트에 대해 전달매트릭스법을 이용하여 음향계의 모델링을 하고 이것으로부터 구한 제어계의 전달함수를 유한한 FIR필터로 구현하여 능동적으로 소음을 제어하는 문제를 검토하였다. 수치적계산에 의한 음향계 모델링방법으로써 최적한 FIR필터의 계수를 구하여 이를 제어계의 모델로 설정하는 방법을 제안하였으며 제어시 실제계에서 방생할 수 있는 음향계 내부의 공명과 제어계의 안정성 및 제어효과를 예측하는 방법을 제사하였다.

• 한국항공우주학회지
• /
• 제34권6호
• /
• pp.59-66
• /
• 2006

액체 로켓엔진에서의 고주파 연소불안정 제어를 위한 수동 안정화 제어 기구로 음향공을 적용하여 감쇠 효과의 적합성을 검증하였다. 우선, 기본형 모델링 연소실에서 발생한 유해 공진주파수는 음향공의 동조를 통하여 효과적으로 감쇠될 수 있음을 확인 하였다. 또한, 음향공의 기하학적 형상에 따른 음향 감쇠 효과를 비교하기 위하여, 주요 설계 변수를 변화시킨 몇 가지 음향공 모델에 대해 유해 공진주파수 감쇠 효과를 정량적으로 비교, 분석하였다. 선형음향해석과 실험적 방법 모두 만족할만한 일치성을 나타내었으며, 오리피스 입구 면적이 가장 크거나 오리피스 길이가 가장 짧은 경우에서 감쇠 효과가 가장 크게 나타났다. 결론적으로 음향공을 이용한 최적의 음향공 제어를 위해서는 음향공 부피를 고려한 최적의 음향공 설계가 절대적으로 필요함을 입증한다.

• 한국전자통신학회논문지
• /
• 제14권1호
• /
• pp.137-146
• /
• 2019

다수의 초음파 트랜스듀서를 이용한 초음파 위상 배열은 초점제어에 의해 인체 내 종양을 치료하는 목적 등으로 사용되고 있다. 초점제어에 의해 결정된 각 초음파 트랜스듀서 표면음압의 크기와 위상은 각 초음파 트랜스듀서에 인가되는 전압의 크기와 위상을 제어하여 구현 가능하다. 본 논문에서는 초음파 트랜스듀서의 인가전압과 표면음압 사이의 관계를 모델링하고, 요구되는 초음파 트랜스듀서의 표면음압을 생성하기 위한 인가전압을 PWM 기법으로 제어하는 방법을 제안한다. 제안한 방법의 타당성은 61개의 초음파 트랜스듀서로 구성된 초음파 위상배열의 초점제어를 예로 들어 시뮬레이션으로 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.403-408
• /
• 2000

An acoustic field in a 3 dimensional enclosure is caused from interference between sound sources and the complex reflections from wall. Therefore, changing an acoustic property of wall such as admittance means generating another acoustic field. The purpose of this paper is utilizing the characteristic to make a quiet zone. First, this paper shows that the control material is essentially on the same road as active noise control(ANC). That is, we can consider the control material as the control source of ANC. However we cannot control the reflection strength of it. Second, through a numerical simulation, this paper shows that the position of the control material is an important variable of the control.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1410-1415
• /
• 2001

Active control of sound radiation from a vibrating rectangular plate by a steady-state harmonic point force disturbance is experimentally studied. Structural excitation is achieved by two piezoceramic actuators mounted on the panel. Two accelerometers are implemented as error sensors. Estimated radiated sound signals using vibro-acoustic path transfer function are used as error signals. The vibro-acoustic path transfer function represents system between accelerometers and microphones. The approach is based on a multi-channel filtered-x LMS algorithm. The results shows that attenuation of sound levels of 11dB, 10dB is achieved.

• 제어로봇시스템학회논문지
• /
• 제8권2호
• /
• pp.104-112
• /
• 2002

Controllers for acoustic noise reduction in disk drives have been developed but they have slower seek time performance than time-optimal controllers. We propose a new seek servo controller that has acoustic noise reduction benefit and faster seek time performance than conventional controllers. The proposed controller is designed to make sure that head is moved with maximized acceleration and deceleration under the voltage limitation imposed on head-positioning motor and so it provides faster seek time than conventional controllers designed by considering the current limitation. The experimental results using a commercially available disk drive confirm that the use of the proposed controller results in foster seek time than conventional controllers for acoustic noise reduction.