• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.141-146
• /
• 2007

The present paper describes a procedure for separation, preconcentration and determination of trace amount of copper in natural water samples by using 2-mercaptobenzimidazol as the complexing agent. The proposed method is based on the surfactant aggregation formed on γ-alumina by mixing sodium dodecyl sulfate and γ-alumina in water; 2-mercaptobenzimidazol was incorporated into inner hydrophobic part of produced ad-micelles in acidic media to produce an assemble suitable for preconcentration and determination of copper ion. Optimum experimental conditions for adsorption of μg/ml levels of copper ions from aqueous solution by the adsorbent have been reported. The copper ions were quantitively adsorbed by the sorbent over the pH range of 7.1-8.0 and were quantitatively desorbed afterward by using sulfosalycilic acid as the eluent. The determination of copper was not interfered in the presence of common metal ions. The procedure was applied for analysis of river water sample. Relative standard deviation was found to be 4.91%.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.239-246
• /
• 2016

In this study, recycling sludge water of Ready-mixed concrete, and was carried out to optimize the system for recycling of the $CO_2$. The most important process in the liquid phase using a carbonation reaction can be recovered ready-mixed concrete is a process for the $Ca^{2+}$ release. $Ca^{2+}$ concentration of the experiment relative to the pH being lowered by the acidic substance during elution was performed. $CO_2$ was trapped in the MEA solution using a generator flue gas. In ready-mixed concrete can be synthesized $CaCO_3$ up to 11kg/1ton. The resulting $CaCO_3$ analysis results show that it is possible to use paper industry.

• Journal of the Korean Chemical Society
• /
• v.46 no.1
• /
• pp.64-68
• /
• 2002

Photocatalytic treatment of aqueous cyanide was studied using both commercial and home-made $TiO_2$'s as catalysts. Among the catalysts, $TiO_2$ made from $Ti(OC_3H_7)_4$ as a precursor showed the highest activity for the degradation of cyanide exceeding a commercial catalyst of Degussa P25. The difference in activities of the catalysts was mainly related to the surface properties of the catalysts such as the ratio of acidic to basic hydroxyl groups. For the catalyst which showed the highest activity, partially reduced $TiO_2$ showed better activity than calcined one.

• Fashion & Textile Research Journal
• /
• v.11 no.6
• /
• pp.953-960
• /
• 2009

The natural dyeing of fabrics with myrobalan extract was investigated. After dyeing of silk, cotton and rayon with myrobalan extract, the dyeability of myrobalan extract was evaluated with the conditions of concentration, temperature, time, repeat-numbers, pH, mordants variables, the changes of dyeability and surface colors by methods of mordanting and color fastness. The wavelength of maximum absorption of the colored solution from myrobalan extract appeared at 272 nm. Therefore, the substance of myrobalan extract was verified as tannin dyes. The optimum dyeing of fabrics was carried out at 30%(o.w.f) dye concentration. Silk fabrics dyed with myrobalan extract showed the highest K/S value at the temperature of $80^{\circ}C$ when it was dyed for seventy minutes, while cotton and rayon fabrics showed the highest K/S value at the temperature of $90^{\circ}C$ when they were dyed for seventy minutes and thirty minutes, respectively. Dyeing operation was carried out in acidic dyebath of pH 3. The K/S value of silk fabric was higher in pre-mordant stage than in post-mordant, while the K/S values of cotton and rayon fabrics were higher in post-mordant stage. The surface colors of dyed fabrics were different according to used mordants: Al and Cu mordanted fabrics were dyed in yellowish colors, while Fe mordanted fabric was dyed in khaki-black color. Light-fastness of the color fastness was improved in Fe-mordant. Washing-fastness was relatively good, and dry cleaning-fastness of dyed fabrics was excellent.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.620-625
• /
• 2017

In this study, the dyeing conditions(temperature, time, concentration) are changed from various conditions on wool fabrics by using corydalis tuber extract in order to develop new natural dyes. The purpose of this study is to improve the dyeability, color fastness, and functionality and to derive optimal dyeing conditions by comparing and analyzing the changes of K/S values and surface color by dyeing pH changes, mordant method, and mordant type. As a result of the experiment, the optimum dyeing condition of the wool fabrics is shown dyeing temperature:$80^{\circ}C$, dyeing time:90min, dyeing concentration:100%. The dyeability by pH variants of corydalis tuber extract indicates that K/S values is higher alkaline than acidic. The mordant method of corydalis tuber extract showed pre-mordant has high K/S values. In terms of color fastness, marked improvement has not been shown despite of mordant treatment on wool fabrics. In particular, color change of color fastness to washing, color fastness to light indicates the low fastness. In addition, the functionality such as antibacterial activities and deodorization can be given at dyeing with corydalis tuber extract thus it is expected to be applied to underwear or apparel products for the elderly and infirm and children with weak skin that required high functionality.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1324-1326
• /
• 2004

In previous studies, we isolated an isogenic LPS mutant of Bradyrhizobium japonicum 61A101C, which was completely devoid of O-polysaccharide and had altered cell surface characteristics. Subsequently, the mutated gene was identified, cloned, and used to complement the LPS mutant strain JS314 to restore the phenotype. Since it has been reported that in Escherichia coli LPS O-polysaccharide is involved in resistance to an organic acid such as acetic acid under low pH (Barna et al., Molecular Microbiology 43: 629-640, 2002), we compared the organic acid resistance of the three B. japonicum strains; wild-type 61A101C, the LPS mutant JS314, and the complemented strain to determine whether the role of O-polysaccharide in the resistance to organic acid could be generalized. Growth of all three strains was inhibited by the presence of 3 mM acetic acid under acidic condition (pH 5.5). To our surprise, however, in the presence of 2 mM acetic acid, wild-type and the complemented strains did not grow while the $LPS^-$ mutant showed a significant growth. Therefore, unlike in E. coli, the lack of O­polysaccharide of LPS appears to render B. japonicum more resistant to organic acid.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.2
• /
• pp.137-144
• /
• 1996

The study was carried out for the preparation and evaluation of a buoyant hydrogel matrix (BHM), which is buoyant in a neutral or in pH 2.0 buffer solution, by the aspects of buoyancy, swelling, and drug release. Physical mixtures of HPC and CP in various molar ratio were employed as a mucoadhesive polymer which swells and controls the rate of drug release. Anhydrous citric acid and sodium bicarbonate in the molar ratio of 1:3 were employed as effervescing agents which provide a buoyancy for the mucoadhesive polymeric matrix. The buoyancy in vitro was expressed as both floating time$(T_{fl})$ and surfing time$(T_{sf})$, which are the time required for floating from the bottom to the surface of the medium and the time to keep the floated state at the surface of medium during release studies, respectively. A close relationship was observed between the buoyancy and the amount of effervescing agent added. $T_{fl}$ of the buoyant hydrogel matrices were decreased to about 10 seconds linearly with increasing the amount of effervescing agent in the range of 5 to 15%. $T_{sf}$ of the buoyant hydrogel matrices were varied from 1 to 3 hr depending on the amount of effervescing agent. The swelling was observed by changes in diameter of the buoyant hydrogel matrices in distilled water or acidic buffer solution, resulted in dependences on pH and the amount of effervescing agents. The release of hydrochlorothiazide from the buoyant hydrogel matrices were followed by apparent zero-order kinetics, while the buoyant hydrogel matrices were floated at the surface and maintaining their swollen shapes.

• Applied Biological Chemistry
• /
• v.48 no.3
• /
• pp.273-279
• /
• 2005

To develop cosmetics using Jindalae flowers (Rhododendron mucronulatum), the surface tensions of extracts were measured and the properties and stability of cream with extracts were investigated. The surface tension of 0.1% ethanol extract was 30.42 mN/m and that of distilled water was 72.2 mN/m. The surface tension of cream with 0.1% ethanol extract was similar to that of sample cream and the measured pH were weakly alkalic. The surface tension of 1% ethanol extract was the lowest value of 24.98 mN/m, the measured pH of cream with 1% ethanol extract was weakly acidic and the particle size of cream was stable. According to an oscillatory test, linear viscoelastic region was extended by adding of 1% water extract and 1% ethanol extract to cream, indicating that the cream had greater enhanced resistance for preserving inner structure as compared to outside stress.　Besides, as a result of the diminished loss angle of ethanol extract cream, the elasticity of cream was increased more than that of sample cream and cream with 0.1% ethanol extract. In contrast, in the case of the increased loss angle of water extract cream, the viscosity of cream was increased. In conclusion, Rhododendron mucronulatum can be deliberated as a cosmetic material because 0.1% water and ethanol extracts showed efficacious physiological activities and cream with 1% extracts could extend linear viscoelastic region.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.7 no.1
• /
• pp.13-21
• /
• 1999

The purposes of this research were to evaluate the character of laboratory wastewater, and to examine the utilization of waste egg shells for neutralization and removal of heavy metals. Waste egg shells are excellent at neutralizing acidic wastewater, because they have alkaline minerals such as calcium. It must be seemed that removal rate of heavy metals were very influenced by adsobent dosage and adsorbate concentrations, because waste egg shells acted as precipitation and adsorption. If we reflected the adsorption capacity(k) and adsorption(1/n) of Freundlich isotherm, we couldn't consider waste egg shells as a good adsorbent. In view of these results, it showed that wastes containing the similar compositions as waste egg shells could utilize the neutralization, precipitation and adsorption of heavy metals in laboratory wastewater.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.11
• /
• pp.1856-1862
• /
• 2015

In order to improve the stability of endoglucanase under thermal and acidic conditions, the endoglucanase gene was fused to the N-terminus of the Saccharomyces cerevisiae pir gene, encoding the cell wall protein PIR. The fusion gene was transformed into Pichia pastoris GS115 for expression. A resulting strain with high expression and high activity was identified by examining resistance to Geneticin 418, Congo red staining, and quantitative analysis of enzyme activity. SDS-PAGE analysis revealed that the endoglucanase was successfully displayed on the yeast cell surface. The displayed endoglucanase (DEG) showed maximum activity towards sodium carboxyl methyl cellulose at approximately 275 IU/g cell dry weight. DEG exhibited greater than 60% residual activity in the pH range 2.5-8.5, higher than free endoglucanase (FEG), which had 40% residual activity at the same pH range. The highest tolerated temperature for DEG was 70℃, much higher than that of FEG, which was approximately 50℃. Moreover, DEG showed 91.1% activity at 65℃ for 120 min, while FEG only kept 77.8% residual activity over the same period. The half-life of DEG was 270 min at 65℃, compared with only 150 min for FEG. DEG could be used repeatedly at least three times. These results suggest that the DEG has broad applications as a yeast whole-cell biocatalyst, due to its novel properties of high catalytic efficiency, acid-thermal stabilities, and reusability.