• Advances in concrete construction
• /
• 제7권4호
• /
• pp.277-288
• /
• 2019

The formulation of self-compacting concretes (SCC) and the study of their properties at the laboratory level were currently well mastered. The aim of this work is to characterize SCC under hot climatic conditions and their effects on the properties of fresh and hardened SCC. Particularly, the effect of the initial wet curing time on the mechanical behavior such as the compressive strength and the durability of the SCCs (acid and sulfate attack) as well as the microstructure of SCCs mixtures. In this study, we used two types of cement, Portland cement and slag cement, three water/binder (W/B) ratio (0.32, 0.38 and 0.44) and five curing modes. The obtained results shows that the compressive strength is strongly influenced by the curing methods, 7-days of curing in the water and then followed by a maturing in a hot climate was the optimal duration for the development of a better compressive strength, regardless of the type of binder and the W/B ratio.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.70-71
• /
• 2021

An increasing amount of red mud (RM) is being generated globally with the growth in alumi-num production. To avoid the RM becoming a pollutant, methods for effectively recycling RM at a low cost are being investigated. This study proposes a method for recycling RM as a construc-tion material. The cement paste with neutralized liquefied red mud had higher compressive strength than that of plain cement paste and cement paste with liquefied red mud without neutralization at 1 d of aging; this indicates that nitric acid neu-tralization increases the early-age strength.

• 대한치과교정학회지
• /
• 제27권2호
• /
• pp.327-334
• /
• 1997

광중합형 글래스 아이오노머 시멘트(Fuji Ortho $LS^{(R)}$)와 화학중합형 레진 시멘트(Mono $Lok2^{(R)}$)을 선택하여 사람의 소구치를 대상으로 법랑질을 퍼미스 및 10% 폴리아크릴산, 38%인산으로 표면처리한 후 금속 및 프라스틱 브라켓을 부착하고 섭씨 $37^{\circ}C$의 생리 식염수에 24시간, 48시간 경과 시키고 만능강도시험기를 이용하여 전단결합강도를 측정하고 비교함으로써 교정용 접착제로서 광중합형 글래스 아이오노머 시멘트가 임상적 적용 가능성이 있는지 여부를 규명하고자 시행하여 다음과 같은 결론을 얻었다. 1. 퍼미스로 법랑질을 표면처리한 광중합형 글래스 아이오노머 시멘트군의 전단결합강도는 화학중합형 레진군의 결합 강도보다 유의성 있게 낮았다(P<0.01). 2. 10% 폴리아크릴산으로 법랑질을 표면처리한 광중합형 글래스 아이오노머 시멘트군의 전단 결합강도는 화학중합형 레진군보다 유의성이 낮았다(PC0.01). 3. 10% 폴리아크릴산으로 법랑질을 표면처리한 광중합형 글래스 아이오노머 시멘트군의 전단결합강도는 피미스로 법랑질을 표면처리한 광중합형 글래스 아이오노머 시멘트군보다 약간 높았으나 통계적으로 유의성이 없었다(P<0.05). 4. 메탈과 플라스틱군의 법랑질 표면처리에 관계없이 통계적으로 유의성이 없었다(P<0.05). 이상의 결과를 종합해볼 때 비록 광중합형 글래스 아이오노머 시멘트가 화학중합형 레진 시멘트보다 결합강도는 낮지만 이의 임상적 적용은 가능할 것으로 사료된다.

• 한국의류학회지
• /
• 제21권2호
• /
• pp.471-481
• /
• 1997

Denims were treated with neutral cellulase, acid cellulase, stone, and stone-neutral cellulase respectively at different cellulase concentrations varying treatment times in rotary washer. The effect of washing on denim was estimated by the changes in weight, color, back staining, tear strength, flex stiffness, and surface characteristics. Also the comparison of neutral cellulase, acid cellulase, stone, and stone-neutral cellulase washings was studied. Washing removes surface fibers and provides weight loss, color difference, back staining, and a decrease in tear strength and in flex stiffness. Stone-neutral cellulase washing and acid cellulase washing have a larger washing effect than neutral cellulase washing and stone washing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.769-770
• /
• 2009

• 대한화학회지
• /
• 제54권6호
• /
• pp.835-840
• /
• 2010

• Archives of Pharmacal Research
• /
• 제29권7호
• /
• pp.556-562
• /
• 2006

Ten semi-synthetic derivatives of asiatic acid were prepared and their wound healing effects were evaluated by employing a tensile strength assay and a wound area assay. Among them, ethoxymethyl 2-oxo-3,23-isopropylidene-asiatate (12) showed the strongest and the fastest wound healing activity. Furthermore, it left the smallest scar after healing.

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.602-618
• /
• 1996

The purpose of this study was to investigate the effect of acid treatment of fluoride applied dentin surface with various concentrations of phosphoric acid for various periods of time on dentin bonding. Dentin specimens prepared from freshly extracted bovine mandibular anterior teeth were divided into fluoridated and nonfluoridated groups. Specimens of nonfluoridated group were pretreated with 10% phosphoric acid for 15 seconds. Those of fluoridated groups were treated with 2% sodium fluoride or 2% stannous fluoride solution for 5 minutes and stored in $37^{\circ}C$ distilled water for 3 days, followed by phosphoric acid treatment. The concentrations of phosphoric acid were 10%, 32% or 50% and the treatment periods of time were 15, 30 or 60 seconds. All the specimens were bonded with All Bond$^{(R)}$ 2 and Bisfil$^{TM}$ composite resin. After bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, tensile bond strengths of each specimens were measured and the pretreated dentin and the fractured dentin surfaces were examined under the scanning electron microscope. The results were as follows : The tensile bond strengths from the fluoridated groups were significantly lower than those from the nonfluoridated group when the concentrations of phosphoric acid and the treatment periods of time were equal in all the groups (p<0.05). In general, the higher the concentration of phosphoric acid and the longer the treatment period of time for acid etching on the fluoride applied dentin surface, the higher were the bond strength values. Recovery of bond strength of the dentin bonding agent was better in the NaF applied group than in the $SnF_2$ applied one. SEM findings of NaF applied and $SnF_2$ applied dentin surfaces demonstrated reaction product-covered and partially or completely obstructed dentinal tubules. SEM findings of dentin surfaces fluoridated for 5 minutes followed by etching showed wider tubular openings and more clean dentin surfaces when dentin was etched with higher concentration of phosphoric acid for longer period of time. On the SEM observations of the fractured dentin-resin interface, the etched specimens of fluoridated group showed an adhesive failure mode when the concentration of phosphoric acid and the treatment period of time were same as in the nonfluoridated group. As the concentration of phosphoric acid and the treatment period of time increase during acid etching, the cohesive failure area increased. However, excessive acid etching caused adhesive failure.

• 대한치과교정학회지
• /
• 제28권6호
• /
• pp.947-954
• /
• 1998

본 연구는 각각 다른 농도의 황산리튬을 함유한 폴리아크릴산을 적용시간을 변화시켜 치아의 법랑질 표면에 도포하여 크리스탈을 형성하고 그 위에 도제브라켓을 부착한후 전단결합강도와 파절양상을 비교하기 위하여 시행하였다. 농도가 서로다른 흔합용액 4종류를 교정치료를 위해 발거된 건전한 소구치 48개의 법랑질 표면에 적용시켰다. 실험용액들은 $50\%$의 폴리아크릴산과 $65\%$의 폴리아크릴산을 기본 용액으로 하여 0.3M의 황산을 공통으로 첨가하고 각각 0.3M 이나 0.6M의 황산리튬을 첨가하여 만들었다. 30초나 60초 동안 준비된 용액을 법랑질 표면에 적용한 후 브라켓을 부착시켜 전단결합강도를 측정하였다. 또한 브라켓 부착 전과 부착 후의 크리스탈 형성 양상을 주사전자현미경을 통하여 관찰하였다. 치아 표면의 잔여 레진 양을 입체현미경을 통하여 관찰하고 분류하여 다음과 같은 결과를 얻었다. 1. $50\%$ 폴리아크릴산으로 처리하였을 때의 전단결합강도가 $65\%$ 폴리아크릴산에 비해 높았다. 2. 황산리튬의 농도나 적용시간에 따른 전단결합강도의 차이는 인정되지 않았다. 3. 브라켓 제거 후 법랑질 표면에서 레진이 거의 관찰되지 않았다. 4. $50\%$ 폴리아크릴산으로 처리하였을 때의 크리스탈 형성 밀도가 $65\%$ 폴리아크릴산의 경우 보다 높았다.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2461-2468
• /
• 2000

In this paper, single fiber pull-out test is used to measure the interfacial bonding shear strength of $Ti_{50}-Ni_{50}$ shape memory alloy composite with temperature. Fiber and matrix of $Ti_{50}-Ni_{50}$ shape memory alloy composite are respectively $Ti_{50}-Ni_{50}$ shape memory alloy and epoxy resin. To strengthen the interfacial bonding shear stress, various surface treatments are used. They are the hand-sanded surface treatment, the acid etched surface treatment and the silane coupled surface treatment etc.. The interfacial bonding shear strength of surface treated shape memory alloy fiber is greater than that of surface untreated shape memory alloy fiber by from 10% to 16%. It is assured that the hand-sanded surface treatment and the acid etched surface treatment are the best way to strengthen the interfacial bonding shear strength of $Ti_{50}-Ni_{50}$ shape memory composite. The best treatment condition of surface is 10% HNO$_3$ solution in the etching method to strengthen the interfacial bonding shear strength of $Ti_{50}-Ni_{50}$ shape memory alloy composite.