• Journal of the Korean institute of surface engineering
• /
• v.43 no.4
• /
• pp.205-210
• /
• 2010

The A106 Gr B low carbon steel, which was used in the electric power plants and heavy chemical plants, was welded by multi-pass arc welding. The heat affected zone (HAZ) formed by welding was corroded in acid chloride solution, or in saturated $H_2S$ containing acid chloride solution, or in saturated $H_2S$ containing acid chloride solution under applied current. In this order of corrosion solution, the rate of corrosion increased, because $H_2S$ accelerated the iron dissolution, hydrogen evolution, and the formation of nonprotective FeS, whereas the applied current accelerated the electrochemical reaction. The scales formed in acid chloride solution consisted primarily of $Fe_3O_4$, while those formed in $H_2S$ containing acid chloride solution consisted primarily of $Fe_3O_4$ and FeS.

• Journal of Welding and Joining
• /
• v.18 no.3
• /
• pp.97-105
• /
• 2000

The stress corrosion cracking(SCC) and hydrogen embrittlement cracking(HEC) characteristics of a weathering steel weldment were investigated in aerated acid-chloride solution. The electrochemical properties of weldment were investigated by polarization test and galvanic corrosion test. Weathering steel did not show passive behavior in the acid-chloride solution. Galvanic corrosion between the weld metal and the base metal was not observed because the base metal was anodic to the weld metal. The slow-strain-rate tests(SSRT0 were conducted at a constant strain rate o 7.87×{TEX}$10^{-7}${/TEX}/s at corrosion potential, and at potentiostatically controlled anodic and cathodic potentials. The weldment of weathering steel was susceptible to both anodic dissolution SCC and hydrogen evolution HEC.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.546-550
• /
• 2014

Relative reactivity of various carbonyl and acid derivatives in MPV-type (Meerwein-Ponndorf-Verley) reduction with an DIBAL(F) model has been studied via DFT and MP2 methods. Free energies of initial adduct formation (-Gadd) of DIBAL(F) model and carbonyls are in the order of amide < ester < aldehyde < ketone < acid chloride; in the alan-amide adduct, the developed positive charge at carbonyl carbon is expected to be stabilized by amide resonance, but in the acid chloride adduct it is destabilized by inductive effect of chloride. However the TS barrier energies (${\Delta}G_{TS}$) for the MPV-type hydride reduction of the carbonyl adducts are in the order of aldehyde < ketone < acid chloride << ester < amide; presumably decreasing order of electrophilicity of carbonyl carbon at adducts, which is well correlated with experimental data. It is noted that the relative reactivity of carbonyl derivatives in MPV-type reduction with DIBAL(X) is not governed by the alan-adduct formation energies, but follows the order of electrophilicity of carbonyl carbon of transition states.

• Korean Journal of Plant Resources
• /
• v.24 no.6
• /
• pp.696-701
• /
• 2011

The aim of this field experiment was to investigate the possible effects of mepiquat chloride (TE) and trinexapac-ethyl (MC) on oil composition, seed yield and endogenous gibberellins content of flax cultivar. Foliar application of plant growth retardants mepiquat chloride (0.897, 1.794 and 2.691 kg a.i. $ha^{-1}$) and trinexapac-ethyl (0.756, 1.512 and 2.668 kg a.i. $ha^{-1}$) had significantly increased seeds ripening rate and seed yield. In contrast, plant height was decreased by foliar application of MC and TE. The application of MC significantly increased seed oil yield (730 kg $ha^{-1}$ by 27.0%) compared to the control. Seed and oil yield, and unsaturated fatty acids (oleic acid, linoleic acid and linolenic acid) were increased by foliar application of MC.

• Journal of the Korean Chemical Society
• /
• v.18 no.2
• /
• pp.132-137
• /
• 1974

Acid mucopolysaccharides were isolated from nucleus pulposus of whale embryo. The separation of acid mucopolysaccharides was most excellent in $0.03{\%}$ hexamine cobaltic chloride in 0.05 M-sodium acetate buffer solution at pH 4.8. Changes in electrophoretic mobility of acid mucopolysaccharides were observed when the sample solution on top of spacer gel were covered with $40{\%}$ sucrose solution. This effect was not observed by the addition of hexamine cobaltic chloride to the buffer solution.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.6
• /
• pp.366-369
• /
• 1985

The reactions of (E)-1-hexenylboronic acid (1) or (E)-${\beta}$-phenylethenylboronic acid (2) with various olefins in acetonitrile at room temperature in the presence of lithium palladium chloride and triethylamine gave the corresponding (E, E)-conjugated dienes stereospecifically in good yields. (E)-${\beta}$-Phenylethenylboronic acid (2) was more reactive than (E)-1-hexenylboronic acid (1) in these vinylations. And these vinylations were also carried out catalytically when 10 mol % of lithium palladium chloride and cupric chloride, as the reoxidant of palladium, or 10 mol % of palladium acetate and mercuric acetate were added instead of stoichiometric amount of lithium palladium chloride.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.4
• /
• pp.296-298
• /
• 1986

Carboxylic acid anhydrides are rapidly reduced with borane-lithium chloride (1:0.1) system to give corresponding alcohols (diols in the case of cyclic anhydride) quantitatively in tetrahydrofuran at room temperature. This reagent tolerates aromatic acid ester, nitro, and halide functional groups, however competitively reduces aliphatic ester and nitrile groups.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.42-46
• /
• 2008

The papers in preserved books and archives experience aging which was affected by a variety of factors. Thus, the studies concerning impacts of those factors on paper aging are required. In this research, a simulation of a short-time accelerated paper aging was conducted in order to examine the effects of acid and metals (alum, copper (II) sulfate, copper (II) chloride, and iron (III) chloride) on the natural paper aging for a long time. As a result of experiments, it is found that both acid and metals have impacts on paper aging. Alum resulted in the significant decrease of pH, brightness, folding endurance, and viscosity of paper. Both copper (II) chloride and iron (III) chloride also resulted in the decrease of brightness, folding endurance, and viscosity of paper. In more detail, paper aging by iron (III) chloride showed much more significant than that by copper (II) chloride. The paper aging in case of copper (II) sulfate coexisting sulfate ion, where metal absorbed moisture was higher than in case of paper treated only by alum. This result indicated that metal catalyzes paper aging by acid. Based on these results, it was revealed that both alum and metal are the major factors in paper aging. In particular, paper aging was far more accelerated in case when acid and metals existed in paper at the same time.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.423-430
• /
• 1993

The purpose of this study was to investigate the effect of ferric and ferric ions contained in phosphoric acid solution as a pretreatment solution on bonding of MMA/TBBO resin to dentin. Each of 1 % and 3 % ferric chloride. cupric chloride. cupric sulfate. and cupric nitrate was mixed into 10% phosphoric acid solution and pretreated dentin surface of bovine anterior teeth for 30 seconds followed- by water rinse and dry. Tensile bond strength was determined after bonding of pretreated dentin with MMA/TBBO resin by use of brush-on ;technique and storing for 24 hours in 3it distilled water. The amount of cupric ions adsorbed on pretreated dentin surface was detected by Wave-Dispersion X-ray microanalyzer for different groups of each pretreatment solution containing cupric salts. The pretreatment with cupric ions contained in 10% phosphoric acid solution was effective to increase bonding strength of MMA/TBBO resin to dentin but not in case of ferric ions. The pretreatment with 3 % cupric chloride and cupric nitrate both enhanced significant increase in bonding strength compared to the control group of 10% phosphoric acid solution(p<0.05). Cupric ions measured in pretreated dentin surface was higher in 3 % cupric chloride group than in 1% cupric chloride group, but couldn't find distinct relationship from the results of this experiment between the amount of adsorbed cupric ions according to the kind of cupric salts and the bonding strength value.

• Macromolecular Research
• /
• v.13 no.6
• /
• pp.483-490
• /
• 2005

A novel, polysaccharide-based, superabsorbent hydrogel was synthesized through crosslinking graft copolymerization of methacrylic acid (MAA) onto kappa-carrageenan ($_{k}C$), using ammonium persulfate (APS) as a free radical initiator in the presence of methylenebisacrylamide (MBA) as a crosslinker. A proposed mechanism for $_{k}C$­g-polymethacrylic acid ($_{k}C$-g-PMAA) formation was suggested and the hydrogel structure was confirmed using FTIR spectroscopy. The effect of grafting variables, including MBA, MAA, and APS concentration, was systematically optimized to achieve a hydrogel with the maximum possible swelling capacity. The swelling kinetics in distilled water and various salt solutions were preliminarily investigated. Absorbency in aqueous salt solutions of lithium chloride, sodium chloride, potassium chloride, calcium chloride, and aluminum chloride indicated that the swelling capacity decreased with increased ionic strength of the swelling medium. This behavior can be attributed to the charge screening effect for monovalent cations, as well as ionic crosslinking for multivalent cations. The swelling of super absorbing hydrogels was measured in solutions with pH ranging from 1 to 13. In addition, the pH reversibility and on-off switching behavior, at pH levels of 3.0 and 8.0, give the synthesized hydrogels great potential as an excellent candidate for the controlled delivery of bioactive agents.