• 제목/요약/키워드: achievable rate

검색결과 177건 처리시간 0.023초

최근 치과용 지르코니아 CAD/CAM 수복물의 임상적 고찰 (A clinical consideration of current dental zirconia CAD/CAM restorations)

  • 이해형
    • 대한치과의사협회지
    • /
    • 제49권5호
    • /
    • pp.279-285
    • /
    • 2011
  • Currently there is no dental ceramic material can be used in all dental situations need to be restored. However, in view of recent clinical reports, the most viable alternative is zirconia ceramic. Clinical success of dental zirconia restorations strongly depends on proper selection of materials, accurate laboratory procedure and final cementation, which can be achievable with the correct understanding of zirconia. As dental materials, zirconia ceramics have a very bright future, because they are being used increasingly in the anterior region as implant fixtures, as well as crown and bridge restorations and implant abutments. Many dental ceramics showing poor clinical performance have been gone from the dental market. However, in terms of outstanding mechanical properties and esthetic nature, new dental materials can replace zirconia ceramics will not be available in the foreseeable future.

Eye Detection in Facial Images Using Zernike Moments with SVM

  • Kim, Hyoung-Joon;Kim, Whoi-Yul
    • ETRI Journal
    • /
    • 제30권2호
    • /
    • pp.335-337
    • /
    • 2008
  • An eye detection method for facial images using Zernike moments with a support vector machine (SVM) is proposed. Eye/non-eye patterns are represented in terms of the magnitude of Zernike moments and then classified by the SVM. Due to the rotation-invariant characteristics of the magnitude of Zernike moments, the method is robust against rotation, which is demonstrated using rotated images from the ORL database. Experiments with TV drama videos showed that the proposed method achieved a 94.6% detection rate, which is a higher performance level than that achievable by the method that uses gray values with an SVM.

  • PDF

반도체 광 증폭기내에서의 4광파 혼합을 이용한 2.5Gb/s 광신호의 전광 파장변환 (All-optical wavelength conversion of 2.5 Gb/s optical signals by four-wave mixing in a semiconductor optical amplifier)

  • 방준학;서완석;이성은
    • 전자공학회논문지D
    • /
    • 제35D권8호
    • /
    • pp.69-75
    • /
    • 1998
  • We demonstrate wavelength conversion of 2.5Gb/s optical signals by four-wave mixing (FWM) in a semiconductor optical amplifier (SOA). We investigate the effect of input pump and signal powers on the coversion efficiency, optical signal-to-noise ratio (OSNR) and extinction ratio to be a measure of performance in a wavelength converter. As a result, we show that the maximum bit error rate (BER) performance can be obtained by co promising among high-vonversion efficiency (minimum Pprobe), high-OSNR (maximum Pprobe) and low-cross-gain saturation effects (Pprobe kept at least 6dB weaker than Ppump). In our experiment, we obtain optimum performance at +3 dBm pump power and -6dBm signal power. The power penalty incurred in the wavelength conversion can be minimized by careful selection of the input pump and signal powers. We show that about 0.5dB power penalty for 3.2nm wavelength coversion at 10-10 BER is achievable.

  • PDF

`스토리텔링`기법을 통한 가구디자인 학습방법 개발 (Development of Teaching Method for Furniture Design through 'Story telling')

  • 김국선
    • 한국가구학회지
    • /
    • 제19권3호
    • /
    • pp.163-171
    • /
    • 2008
  • This Study has been conducted with many concerns about various teaching methods that attainable the substantial learning process of practical affair system in order to cope with the rapidly changing situation of the times and the educational environment in the field of design. Design Process Studying Method which utilizes 'Story Telling' as the process where the whole learning is achievable, in accordance with the educational target of the creative professional technician training that complies with the requirement of the times, and by progress of the integrated structure dividing as 1, 2, 3 stages, it doubles various studying effect, and it enables to expect the connection studying effect with other study-subject. Since the process of such program induces the positive participation of the student, it was known that a superior interchange of information is attainable, and due to its enthusiasm and interest on the study, the participating rate for study was appeared very highly.

  • PDF

Dialysis with ultrafiltration through countercurrently parallel-flow membrane modules

  • Yeh, Ho-Ming;Chen, Chien-Yu
    • Membrane and Water Treatment
    • /
    • 제4권3호
    • /
    • pp.191-202
    • /
    • 2013
  • The application of ultrafiltration operation to the dialysis in countercurrently parallel-flow rectangular membrane modules was investigated. The assumption of uniform ultrafiltration flux was made for operation with slight concentration polarization and declination of transmembrane pressure. Considerable improvement in mass transfer is achievable if the operation of ultrafiltration is applied, especially for the system with low mass transfer coefficient. The enhancement in separation efficiency is significantly increased with increasing ultrafiltration flux, as well as with increasing the volumetric flow rates. Furthermore, increasing the volumetric flow rate in retentate phase is more beneficial to mass transfer than increasing in dialysate phase.

Dialysis in parallel-flow rectangular membrane modules with external reflux for improved performance

  • Yeh, Ho-Ming;Cheng, Tung-Wen;Chen, Kuan-Hung
    • Membrane and Water Treatment
    • /
    • 제1권2호
    • /
    • pp.159-169
    • /
    • 2010
  • The effect of external recycle on the performance of dialysis in countercurrent-flow rectangular membrane modules was investigated both theoretically and experimentally. Theoretical analysis of mass transfer in parallel-flow device with and without recycle is analogous to heat transfer in parallel-flow heat exchangers. Experiments were carried out with the use of a microporous membrane to dialyze urea aqueous solution by pure water. In contrast to a device with recycle, improvement in mass transfer is achievable if parallel-flow dialysis is operated in a device of same size with recycle which provides the increase of fluid velocity, resulting in reduction of mass-transfer resistance, especially for rather low feed volume rate.

섬유소(纖維素)의 당화(糖化) (Enzymatic Hydrolysis of Cellulose)

  • 이계준
    • 생약학회지
    • /
    • 제7권2호
    • /
    • pp.85-93
    • /
    • 1976
  • Since cellulose is the only organic material that is annually replenishable in very large quantities, we must explore ways to utilize it as a source of energy, food and chemicals. For the utilization of this resource, it is first enzymatic hydrolyzed to glucose, then the glucose can be used as a food, converted single cell protein by microorganism, fermented to clean burning fuel and other chemicals. Cellulolytic enzyme, cellulase, consists of two or three major components, $C_1-cellulase$, $C_x-cellulase$ and ${\beta}-glucosidase$. $C_x-cellulase$ are fairly common but $C_1-cellulase$ are quite rare. Trichoderma viride is the best source of active cellulose, especially $C_1-enzyme$. Saccharification rate of cellulose in greatly influenced by the degree of crystallinity and extent of lignification. But by the pretreatment the substrate with cellulose swelling agent, delignifying reagent and physical treatment, the degree of saccharification is enhanced. Thus, glucose syrups of 2 to 10% concentration are realized from milled newspaper. The enzymatic hydrolysis of such energy rich material, such as cellulose, to glucose is technically feasible and practically achievable on a very large scale.

  • PDF

Mass transfer in cross-flow dialyzer with internal recycle

  • Yeh, Ho-Ming;Chen, Chien-Yu
    • Membrane and Water Treatment
    • /
    • 제4권4호
    • /
    • pp.251-263
    • /
    • 2013
  • The internal reflux effect on dialysis through the retentate phase of a countercurrently cross-flow rectangular module is investigated. Theoretical analysis of mass transfer in cross-flow devices with or without recycling is analogous to heat transfer in cross-flow heat exchangers. In contrast to a device without reflux, considerable mass transfer is achievable if cross-flow dialyzers are operated with reflux, which provides an increase in fluid velocity, resulting in a reduction in mass-transfer resistance. It is concluded that reflux can enhance mass transfer, especially for large flow rate and feed-concentration operated under high reflux ratio.

Mathematical Properties of the Differential Pom-Pom Model

  • Kwon, Youngdon
    • Macromolecular Research
    • /
    • 제9권3호
    • /
    • pp.164-170
    • /
    • 2001
  • Recently in order to describe the complex rheological behavior of polymer melts with long side branches like low density polyethylene, new constitutive equations called the pom-pom equations have been derived by McLeish and Larson on the basis of the reptation dynamics with simplified branch structure taken into account. In this study mathematical stability analysis under short and high frequency wave disturbances has been performed for the simplified differential version of these constitutive equations. It is proved that they are globally Hadamard stable except for the case of maximum constant backbone stretch (λ = q) with arm withdrawal s$\_$c/ neglected, as long as the orientation tensor remains positive definite or the smooth strain history in the now is previously given. However this model is dissipative unstable, since the steady shear How curves exhibit non-monotonic dependence on shear rate. This type of instability corresponds to the nonlinear instability in simple shear flow under finite amplitude disturbances. Additionally in the flow regime of creep shear flow where the applied constant shear stress exceeds the maximum achievable value in the steady now curves, the constitutive equations will possibly violate the positive definiteness of the orientation tensor and thus become Hadamard unstable.

  • PDF

Performance Analysis of LR-aided ZF Receiver for MIMO Systems

  • Kim, Sangchoon
    • International journal of advanced smart convergence
    • /
    • 제7권3호
    • /
    • pp.37-43
    • /
    • 2018
  • Lattice-reduction (LR) techniques have been developed for signal detection in spatial multiplexing multiple input multiple output (MIMO) systems to obtain the largest diversity gain. Thus, an LR-assisted zero-forcing (ZF) receiver can achieve the maximum diversity gain in spatial multiplexing MIMO systems. In this paper, a simplified analysis of the achievable diversity gain is presented by fitting the channel coefficients lattice-reduced by a complex Lenstra-Lenstra-$Lov{\acute{a}}z$ (LLL) algorithm into approximated Gaussian random variables. It will be shown that the maximum diversity gain corresponding to two times the number of receive antennas can be achieved by the LR-based ZF detector. In addition, the approximated bit error rate (BER) expression is also derived. Finally, the analytical BER performance is comparatively studied with the simulated results.