• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.653-662
• /
• 2017

Copper(II) acetate spectrophotometry method (CASM) was used for the rapid and convenient determination of cation exchange capacity (CEC) in soils. This method is composed of a single-step exchange reaction that adsorbs copper and is measured through spectrophotometry. The CEC of 16 Korean soils were measured using 1M ammonium acetate method (AAM) and the CASM. The CEC values determined by CASM and AAM were not significantly different, and were highly correlated ($r=0.966^{**}$). Due to the convenience, cost effectiveness, and time saving analysis of CASM, this method is recommended for most soil laboratories to measure CEC in Korean soils. However, CASM may not be applicable for soils that have a much higher CEC (greater than $20cmol_c\;kg^{-1}$).

• Journal of Oral Medicine and Pain
• /
• v.23 no.4
• /
• pp.343-352
• /
• 1998

This experiment was performed to investigate effects of zinc containing solution on the major normal flora Staphylococccus aureus, Streptococus mutans and Candida albicans and to observe the variation according to anionic change and concentration difference. Zinc chloride, zinc iodide and zinc acetate solution were added to werially diluted broth culture so that each final concentration might be 0.25%, 0.5%. 1%. After that, 100ul of each aliquot was spreaded on each selective media plate( Mannitol Salts Agar plate for Staphylococcus aureus, Mitis Salivarius Agar plate for Streptococcus mutans and Sabouraud Destrose Agar plate for Candida albicans). The % killing was calculated bu CFU count after incubation under the appropriate condition. 1. zinc iodide, zinc chloride, and zinc acetate solutions showed inhibitory effects on Staphylococcus aureus, Streptococcus mutans and Candida albicans. 2. The inhibitory effects on Staphylococcus aureus were ranked in order of ainc iodide, zinc chloride and zinc actate. 3. The inhibitory effects on Streptococcus mutans were ranked in orfer of zinc iodide, zinc chloride and zinc acetate. 4. the inhibitory effects on Candida albicans showed no difference among zinc iodide, zinc chloride and zinc acetate. 5. The inhibitory effects of zinc chloride and zinc acetate on Staphylococcus aureus and Streptococcus mutnas showed increasing pattern as the concentration increase. But the inhibitory effects of zinc iodide on Staphylococcus aureus and Streptococcus mutans showed no apparent difference according to concentrations and it was the case with the inhibitory effects of zinc iodide, zinc chloride and zinc acetate on Candida albicans.

• Korean Journal of Pharmacognosy
• /
• v.44 no.4
• /
• pp.379-383
• /
• 2013

Portulaca oleracea L. is known to have many biological benefits such as anti-oxidant, anti-inflammatory, anti-allergic and anti-tumor. The objective of this study is to explore the neuroprotective effect of P. oleracea L. against glutamate-induced oxidative stress in mouse hippocampal HT22 cells. P. oleracea L. 70% ethanol extract and solvent fractions have the potent neroprotective effects on glutamate-induced nerotoxicity by induced the expression of heme oxygenase (HO)-1 in HT22 cells. Especially, ethyl acetate fraction showed higher protective effect. In HT22 cell, P. oleracea L. treatment with ERK inhibitor (PD98059) and c-JUN N-terminal kinase (JNK) inhibitor (SP600125) reduced P. oleracea L. ethyl acetate fraction induced HO-1 expression and P. oleracea L. ethyl acetate fraction also increased ERK and JNK phosphorylation. Furthermore, we found that treatment of P. oleracea L. caused the nuclear accumulation of Nrf2. In conclusion, the ethyl acetate fraction of 70% ethanol extract of P. oleracea L. significantly protect glutamate-induced oxidative damage by induction of HO-1 via Nrf2, ERK and JNK pathway in mouse hippocampal HT22. Taken together these finding suggest that P. oleracea L. ethyl acetate fraction is good source for taking active compounds and may be a potential therapeutic agent for brain disorder that induced by oxidative stress and neuronal damage.

• Journal of Korea Foresty Energy
• /
• v.17 no.1
• /
• pp.30-35
• /
• 1998

The cellulose modification can be made in steps, giving a range of new products having properties quite different from the parent cellulose. Effective molecular weight control and narrow molecular weight distribution of the polyacrylonitrile can be accomplished by anionic polymerization technique. Preformed polyacrylonitrile was grafted precisely onto cellulose acetate by SN$_2$ reaction mechanism in a simple and effective way under homogeneous reaction condition. The 3.5g of completely dried cellulose acetate(DS=2.4) dissolved in 50ml of dry THF was transferred to the 215m1 polyacrylonitrile solution. The mixture was stirred vigorously under nitrogen atmosphere for 2 hrs. FTIR spectra of cellulose acetate and grafted cellulose acetate were taken, and their characteristic bands were identified.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1625-1631
• /
• 2013

We report a facile synthetic approach of high-quality chromium(III) terephthalate [MIL-101(Cr)] by acetate-assisted method in the absence of toxic HF. Results indicate that the morphology and surface area of the MIL-101(Cr) can be tuned by modifying the molar ratio of acetate/$Cr(NO_3)_3$. The Brunauer-Emmett-Teller (BET) surface area of MIL-101(Cr) synthesized at the optimized condition can exceed 3300 $m^2/g$. It is confirmed that acetate could promote the dissolution of di-carboxylic linker and accelerate the nucleation ratio. So the pure and small size of MIL-101(Cr) with clean pores can be obtained. $CO_2$, $CH_4$ and $N_2$ adsorption isotherms of the samples are studied at 298 K and 313 K. Compared with the traditional method, MIL-101(Cr) synthesized by acetate-assisted method possess enhanced $CO_2$ selective adsorption capacity. At 1.0 bar 298 K, it exhibits 47% enhanced $CO_2$ adsorption capacity. This may be attributed to the high surface area together with clean pores of MIL-101(Cr).

• Journal of the Korea Furniture Society
• /
• v.10 no.1
• /
• pp.65-71
• /
• 1999

The bending performance of sloped finger-jointed Rhus verniciflua were tested in order to improve the strength properties of finger-joint. Sloped finger-cut pieces were jointed with three kinds of adhesives (polyvinyl acetate, polyvinyl-acryl acetate and oilic resin). The slope ratios of finger joints were 0, 1.0, 1.5, and 2.0. The MOE, MOR and deflection to maximum load in bending of sloped finger-joints and solid wood specimen were measured. The results were : 1) The efficiencies of MOE to finger and sloped finger-joints to the solid wood were almost same in the three kinds of adhesives(polyvinyl acetate, polyvinyl-acryl acetate and oilic urethane resin) and there were some effect of slope on the MOE in a sloped finger-joint for three kinds of resin adhesives. 2) There was the effect of slope on the MOR in sloped finger-joints in every kind of adhesive. The efficiencies of MOR in slope ratios of 0 and 2.0 ranged 65-79%, respectively. There was also a slight effect of the kinds of adhesives on the MOR. However, the efficiencies of deflection to the urethane resin adhesive were much less than those of polyvinyl acetate, polyvinyl-acryl acetate resin adhesives except the slope ratio of 0. 3) It might be impossible to estimate the bending stregth of sloped finger-jointed Rhus verniciflua by using MOE. The correlation coefficient(0.192) between MOE was very low and not significant at 5% level.

• Textile Coloration and Finishing
• /
• v.5 no.3
• /
• pp.221-228
• /
• 1993

Cellulose acetate and methyl cellulose were synthesized from waste cellulose in order to make waste knit on value added highly. Crystal waste cellulose by oxidation using $HIO_4$ and then acetylation was decrystallized. A degee of crystallinity was measured by X-ray diffraction and the structure was identified by FT-IR spetroscopy, respectively. Cellulose acetate was prepared from the reaction of decrystallized cellulose with acetic acid, cone-$H_{2}SO_{4}$ and acetic anhydride. Also, structure identification by FT-IR and a degree of crystallinity by X-ray diffraction were performed. DS of the synthesized cellulose acetate was 2.8 and viscosity average molecular weight was 238,000. Also, methyl cellulose was synthesized by treating cellulose acetate with NaOH and iodomethane. DS of the synthesized methyl cellulose was 3.0. Glucose unit with three hydroxy groups was all substituted by methoxyl groups. It was identified by FT-IR spectroscopy. Also, the thermal properties of the synthesized methyl cellulose were examined by DSC. It shewed two shewed melting peaks at 22$0^{\circ}C$ and 24$0^{\circ}C$ in the 2nd scan. It proved that DS=3.0 of methyl cellulose was a thermotropic liquid crystal.

• Journal of Chest Surgery
• /
• v.23 no.2
• /
• pp.268-274
• /
• 1990

Bleeding after cardiopulmonary bypass remains a cause for concern, requiring reexploration of the chest in approximately 3 percent of patients who have had operations on the heart. We examined the possibility that this problem might be alleviated by desmopressin acetate [DDAVP], synthetic vasopressin analogue that lacks vasoconstrictor activity. In a prospective, randomized trial, we studied the effect of intraoperative desmopressin acetate in 20 patients [the treated group 10 patients and the control group 10 patients] undergoing various cardiac operations requiring cardiopulmonary bypass. The result showed that the early postoperative [during first 24hrs] and mean postoperative blood loss [first 3 days] of the treated group were significantly reduced than the control group[447\ulcorner199ml in the treated group versus 746\ulcorner199ml in the treated group versus 746\ulcorner295 ml in the control group, p=0.014; mean\ulcornerstandard deviation and 675\ulcorner276 ml in the treated group versus 1006\ulcorner303 ml in control group, p=0.019]. The mean red-cell transfusion in first 3days were reduced in the treated group than the control group [3.3\ulcorner1.7 units vs 4.9\ulcorner1.7units, P=0.051]. There were no untoward side effects of desmopressin acetate. We conclude that the administration of desmopressin acetate can be recommended to reduce blood loss and blood conservation in patients undergoing cardiac operations.

• Textile Coloration and Finishing
• /
• v.17 no.4 s.83
• /
• pp.27-34
• /
• 2005

In order to prepare acetate nano filter for the adsorption of nicotine/tar in tobbaco, acetate nano fiber was fabricated by elecrospining from acetate solution dissolved in acetone/DMAc(2/1). Above a critical polymer concentration($15\%$), the nano fiber was formed. The average diameter of nano fiber was decreased with the applied voltage and increased with the feeding rate. Appropriate spinning condition was considered to be $15wt\%$ polymer concentration, 11.25kV applied voltage, 0.6ml/h feeding rate, and 13-15cm TCD. Using the nano fiber, acetate nano filter was fabricated. It showed good nicotine/tar adsorption ability compared with general tobbaco filter. It was considered that the increase of surface area and the development of microporous structure in filter was much affected to the adsorption of nicotine/tar.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.5
• /
• pp.914-918
• /
• 2004

This study was carried out to analyze the metabolic flux of W. kimchii sk10 on pyruvate and ethanol as a carbon source. The sk10 grown on ethanol produced acetate under aerobic conditions rather than under anaerobic conditions. The lactate and acetate were produced on ethanol plus pyruvate by the sk10 grown under aerobic and anaerobic conditions, respectively. The resting cell of sk10 produced 99.1 mM acetate and 17.3 mM lactate under aerobic conditions and 51.1 mM acetate and 62.4 mM lactate under anaerobic conditions from ethanol plus pyruvate, respectively. This result is thought to be due to the difference in the $NADH/NAD^+$ ratio depending on the growth conditions. The 11-fold overproduction of NADH peroxidase results in a low $NADH/NAD^+$ratio under aerobic growth conditions. At the low $NADH/NAD^+$ ratio, the metabolic flux of pyruvate toward lactate has to be shifted to a flux toward acetate without NADH oxidation to $NAD^+$, and ethanol oxidation to acetate coupled to $NAD^+$ reduction to NADH has to be activated.