• 조명전기설비학회논문지
• /
• 제20권7호
• /
• pp.14-20
• /
• 2006

본 연구는 위치지정 중첩 화상표시 구동방식에서 표시방전 유지펄스의 휴지기간 폭에 대한 방전특성을 실험한 것이다. 실험결과, 표시방전은 벽전하 뿐만 아니라 공간전하의 영향도 강하게 받는다는 것을 알았다. 휴지기간 바로 다음에 나오는 첫 번째 표시방전은 휴지기간에 대한 의존도가 높으며 두 번째 표시방전은 의존도가 매우 낮았다. 첫 번째 표시방전이 다소 불충분해도 어느 정도이상 벽전하가 축적되기만 하면 두 번째 표시방전은 안정적으로 유도될 수 있으나 공간전하의 영향을 고려하면 휴지기간의 폭은 $30[{\mu}s}]$ 이내가 바람직하다. 또한 휴지기간의 폭이 $30[{\mu}s}]$까지는 약 12[V]의 균일한 표시방전 전압의 동작마진을 얻을 수 있었다.

• 대한기계학회논문집B
• /
• 제26권2호
• /
• pp.227-237
• /
• 2002

A numerical technique for simulating the aggregation of charged particles was presented with a Brownian dynamic simulation in the free molecular regime. The Langevin equation was used for tracking each particle making up an aggregate. A periodic boundary condition was used for calculation of the aggregation process in each cell with 500 primary particles of 16 nm in diameter. We considered the thermal force and the electrostatic force for the calculation of the particle motion. The electrostatic force on a particle in the simulation cell was considered as a sum of electrostatic forces from other particles in the original cell and its replicate cells. We assumed that the electric charges accumulated on an aggregate were located on its center of mass, and aggregates were only charged with pre-charged primary particles. The morphological shape of aggregates was described in terms of the fractal dimension. In the simulation, the fractal dimension for the uncharged aggregate was D$\_$f/ = 1.761. The fractal dimension changed slightly for the various amounts of bipolar charge. However, in case of unipolar charge, the fractal dimension decreased from 1.641 to 1.537 with the increase of the average number of charges on the particles from 0.2 to 0.3 in initial states. In the bipolar charge state, the average sizes of aggregates were larger than that of the uncharged state in the early and middle stages of aggregation process, but were almost the same as the case of the uncharged state in the final stage. On the other hand, in the unipolar charge state, the average size of aggregates and the dispersion of particle volume decreased with the increasing of the charge quantities.

• Transactions on Electrical and Electronic Materials
• /
• 제14권3호
• /
• pp.121-124
• /
• 2013

The incorporation of 90 nm alumina particles into an epoxy matrix to form a composite microstructure is described in present study. It is shown that the use of ultrafine particles results in a substantial change in the behavior of the composite, which can be traced to the mitigation of internal charges when a comparison is made with conventional $Al_2O_3$ fillers. A variety of diagnostic techniques have been used to augment pulsed electro-acoustic space charge measurement to provide a basis for understanding the underlying physics of the phenomenon. It would appear that, when the size of the inclusions becomes small enough, they act cooperatively with the host structure and cease to exhibit interfacial properties. It is postulated that the $Al_2O_3$ particles are surrounded by high charge concentrations. Since $Al_2O_3$ particles have very high specific areas, these regions allow limited charge percolation through $Al_2O_3$ filled dielectrics. The practical consequences of this have also been explored in terms of the electric strength exhibited. It would appear that there was a window in which real advantages accumulated from the nano-formulated material. An optimum filler loading of about 0.5 wt.% was indicated.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2412-2420
• /
• 2018

The thermal degradation of low density polyethylene (LDPE) will accelerate the production of carbonyl groups (C=O), which can act as the induced dipoles under high voltage. In this paper, we researched the dielectric properties and space charge behavior of LDPE after thermal aging, which can help us to understand the correlation between carbonyl groups (C=O) and electrical properties of LDPE. The spectra results show that LDPE exhibit obvious thermooxidative reactions when the aging time is 35 days and the productions mainly contain carboxylic acid, carboxylic eater and carboxylic anhydride, whose amount increase with the increasing of aging time. The dielectric properties show that the real permittivity of LDPE is inversely proportional to temperature before aging and subsequently become proportional to temperature after thermal aging. Furthermore, both the real and imaginary permittivity increase sharply with the increasing of aging time. The fitting results of imaginary permittivity show that DC conductivity become more sensitive about temperature after thermal aging. On this basis, the active energies of materials calculated from DC conductivity increase first and then decrease with the increasing of aging time. In addition, the space charge results show that the heterocharges accumulated near electrodes in LDPE change to the homocharges after thermal aging and the mean volume charge density increase with the increasing of aging time. It is considered that the overlaps caused by electrical potential area is the main reason for the increase of DC conductivity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.722-725
• /
• 2003

In AC plasma display, it is very important to quantify the wall voltage induced by the wall charge accumulated on the dielectric surface. If we know the quantities of the wall voltage in each period of every sequence; reset period, address period and sustain period, then it helps us to design the optimal driving waveform for high efficiency plasma display. We develop a new method to measure the wall voltage with VDS (Versatile Driving Simulator) system. From this method the wall voltage induced by a wall charge profiles just after the reset discharge of every cells in plasma display panel can be investigated and analyzed successfully. It is noted that the wall voltage profiles are influenced by the space charge and then they are stabilized as time goes by. It is also noted that both the remaining wall charge at the previous sequence and space charges contribute to wall voltage quantities just after the reset discharge. It is noted that the wall charges contribute dominantly after a few hundreds microseconds, while the space charges have been decayed within 100 ${\mu}s$ just after the reset discharge.

• Journal of Multimedia Information System
• /
• 제6권3호
• /
• pp.147-154
• /
• 2019

In a variety of fields, highly developed technology is being combined to create a lot of value. In order to keep up with this global trend, the Ministry of Education, which is in charge of national education, continuously develops and applies content for creative education to textbooks. The continuous development of content for creative education is not only related to national interests, but also to the continued development of mankind. Today, the succession and development of human knowledge is in charge of the education system. Research into an effective educational system is necessary for effective succession of rapidly developing science and technology and building up technical personnel with such skills. In particular, the computer science field is faster in development than other scientific fields and has accumulated many technologies, indicating that it takes a lot of time and good teaching to foster talent that can effectively utilize the technology. In this paper, elementary school subjects were analyzed to achieve the purpose of cultivating talent in the field of computer science. In addition, we have investigated techniques related to computer programming learning not covered in elementary school subjects. So we developed content that students need to practice. Next, we taught the content to randomly selected elementary school students and assessed their educational effectiveness. As a result of training using the content we developed, 55.37% increased academic performance.

• 대한공업교육학회지
• /
• 제30권2호
• /
• pp.23-32
• /
• 2005

The purpose of this study is to investigate and analyze the actual state of teaching and learning methods which are applied to the vocation inquiry section-related subjects of the College Scholastic Ability Test(CSAT) by the teachers who teach specialized subjects of vocational high schools. In order for us to get the background and feature of establishment in the area of vocation inquiry section of the CSAT, previous studies and literature was analyzed and sample survey on the 600 teachers who teach the vocation inquiry section-related subjects was made. The result of this survey is as shown below; First, the teachers who are in charge of vocation inquiry section-related subjects understand that theory and practice is in the ratio 60.76:39.24 and ratio of theory is higher than that of practice. Second, teaching and learning method which is the most relevant to the vocation inquiry section is in the order of lecture(83.9%), experiment & practice(50.4%), computerized learning(41.1%). Third, teaching and learning method which is the most used by the teachers who are in charge of vocation inquiry section-related subjects is in the order of lecture(85.8%), computerized learning(50.1%), experiment and practice(44.4%). Forth, the most desirable teaching and learning method which the teachers who are in charge of vocation inquiry section for this subject believe is in the order of lecture(62.7%) experience & practice(47.7%), computerized learning(44.4%). In light of this result, even though there were not so much difference among the teaching-learning methods which are the most consistent with the contents of the subject in relation to the vocation inquiry section, the most used teaching-learning method by the teachers who teach vocation inquiry section-related subjects and the most desirable teaching-learning method which the teachers who are in charge of vocation inquiry section believe, the most used teaching-learning method by the teachers who are in charge of the vocation inquiry section is lecture. Therefore, it is necessary for us to reinforce the contents in relation to the practice & experiment so that the experience and application can be accumulated and improved through practice which is the specialty of the course of the study in the vocational high school and various teaching and learning method should be developed in consideration of contents of the subject, capability & quality of the learners and status of a classroom.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.813-816
• /
• 2003

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were applied to Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased, the stronger breakdown strength became at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric field is concentrated. In the case of filled specimens with treating silane, the breakdown strength become much higher. Finally, according to Weibull distribution analysis, reducing breakdown probability of equipment insulation lower than 0.1 % level requires the allowable field intensity values to be kept under 21.5 MV/cm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.92-95
• /
• 2001

The dielectric breakdown of epoxy composites used for transformers was experimented and then its data were simulated by Weibull distribution probability. First of all, speaking of dielectric breakdown properties, the more hardener increased the stronger breakdown strength at low temperature because of cross-linked density by the virtue of ester radical. The breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised and the electric field is concentrated. In the case of filled specimens with treating silane, the breakdown strength become much higher Finally, from the analysis of weibull distribution, it was confirmed that as the allowed breakdown probability was given by 0.1[%], the applied field value needed to be under 21.5 [Mv/cm].

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.768-770
• /
• 2003

In AC PDP, since charges generated by gas discharge are accumulated on the dielectric. The dielectric is a major factor to determine cell capacitance and its memory effect is a play an important role in PDP driving. In this experiment, we have investigated the electro-optical characteristics with dielectric thickness and we have analyzed wall charge and wall voltage by Q-V energy diagram. The dielectric thickness was varied from 20 um to 50 um. As results, according to the dielectric thickness increase,cell capacitance and power consumption is reduced.