• 한국기계가공학회지
• /
• 제8권2호
• /
• pp.3-9
• /
• 2009

When washing machine is rotated in the laundry, it tends to lean toward one side. This tendency causes a serious vibration. The balance of washing machine plays an important role in order to reduce the vibration by injecting the sand or the salt water into the balance of washing machine. The hot plate welder is used to prevent from outflow of contents. The hot plate welder brings about many problems which is concerned with accidents. The direction recognition and location information of the balance are required in this system. In this paper, the recognition direction of balance in washing machine using machine vision system is studied. The template matching algorithm compares sub-image with original image acquired in real-time to obtain a center point of balance image. The mid points and the edges of balance are estimated by the edge detection and gauging algorithms. The data acquired by these results is used for recognition direction of balance. The automation software for image processing is developed by using LabVIEW.

• 디지털콘텐츠학회 논문지
• /
• 제19권3호
• /
• pp.561-567
• /
• 2018

본 논문에서는 4차 산업혁명을 기반으로 한 스마트 재난안전관리 전 과정에 적용하여 사고나 재난으로부터 인간 사회 경제 환경 피해 등을 최소화하고 빅데이터를 활용한 위험예측 및 위험징후 모니터링 기술에 의한 예측평가와 재난정보수집분석 및 현장상황 실시간 감지 분석에 의한 5세대 통신시스템의 예방, 가상현실과 증강현실을 활용한 몸으로 기억하는 교육과 훈련에 의한 대비, 재난안전관리 의사결정 지원시스템의 인공지능에 의한 대응, 정찰 탐색 및 방재 구호에 위한지능형로봇에 의한 복구와 피해규모 분석 현장상황 공유하기 위한 무인항공기를 활용한 조사 분석의 스마트 재난안전관리 대응체계 구축 전략방안을 제시하였다.

• 한국항해항만학회지
• /
• 제44권2호
• /
• pp.110-118
• /
• 2020

With the expansion of the shipping and port logistics industry in the 21st century, the traffic density is continuously increased because of the increase in volumes of world sea freight and fleets, as well as the increase in the causes of potential marine accidents, such as ship collisions and stranding. Accordingly, the International Maritime Organization (IMO) has requested that the installation and operation of VTS should be applied in areas with high risk of marine traffic, and the request should be included as one of the Safety of Life at Sea (SOLAS) regulations. In this paper, the fundamental requirements of the radar system for vessel traffic services were analyzed and the analyzing factors were based on the IALA guideline.s This paper also includes results for the requirement and recommendation analysis on detection distance, target separation, and the target position accuracy of X-band radar. Also, to check if it satisfies the requirement of detection distance, range and azimuth separation of small point targets, and target position accuracy from the IALA guidelines, the test was conducted through the radar image acquired at the VTS center, and hence, the validity of the technical performance requirements was confirmed.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.493-497
• /
• 2015

본 연구는 이동수단의 기술적 발전에도 불구하고 교통사고로 인한 물적, 인적 피해가 감소하지 않는 문제에 대한 관심에서 출발했다. 현재 생산되고 있는 차량은 전후방 센서에 의해 객체의 근접도만을 감지하여 운전자에게 알려주고 있는데 본 연구는 색 검지 알고리즘, 원모양인식 알고리즘, 거리인식 알고리즘을 구현하여 객체가 감지되면 해당 객체를 회피하거나 차량을 정지시켜주도록 하여 사고감지를 넘어선 사고방지 시스템을 구축한 것이다. 시뮬레이션을 위해 소형무선통신 카메라를 장착한 아두이노 차량 로봇을 직접 제작하여 모의 도로 주행에서 로봇이 성공적으로 객체를 회피하거나 로봇 차량이 정지하는 것을 확인하였다.

• 정보처리학회논문지C
• /
• 제11C권7호
• /
• pp.993-998
• /
• 2004

웜 바이러스 및 분산서비스거부 공격의 등장으로 침해사고의 공격대상 및 피해범위는 특정 시스템이나 서비스에서 벗어나 네트워크 자체의 장애 및 마비로 확대되고 있다. 이러한 공격 형태는 가장 강력하고 빈번하게 발생하고 있으며, 특히 공격의 경유지로 이용될 인터넷서비스제공자들은 심각한 피해를 입을 수 있다. 그러나 이러한 웜 바이러스 및 분산서비스거부 공격의 빠른 전파속도로 인해 다수의 시스템에서 동시에 발생하는 것이 일반적인 반면에 네트워크 차원의 대응은 네트워크 관리자에 의한 수동적으로 이루어져 대응 속도가 느리고 전체 발생량을 처리할 수 없는 형편이다. 이에 따라 본 논문에서는 원 바이러스 및 분산서비스거부 공격 발생 여부 및 공격자(공격자 IP 주소)를 자동으로 탐지 할 수 있는 방안을 제시한다.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.526-531
• /
• 2016

This paper presents an experimental study on the optimal settings for the selected DC fault relay (50F) to improve the operating performance for the high-speed circuit breaker on DC feeding system which ensure safety within rolling stock maintenance depot. In this study, current supplied to overhead contact wire was calculated on 1 ms interval to analyze the correction values of DC fault selective relay for the operation of current supply cutout. Particularly, standards for the accurate detection of accidents between an electric railway vehicle and the electric power facilities are shown by investigating the optimal correction values for detection of fault current, and the results indicated that it takes about 213 ms for the DC fault selective relay(50F) to fully open. In the future, the correction values of DC fault selective relay suggested in this paper will be used as the reference values of protective relay for the safe operation of DC electric railroad system such as urban railway.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.34-42
• /
• 2017

Material defects in the Steam Generator Tubes (SGT) of sodium cooled fast breeder reactor (PFBR) can lead to leakage of water into sodium. The water and sodium reaction will lead to major accidents. Therefore, the examination of steam generator tubes for the early detection of defects is an important requirement for safety and economic considerations. In this work, the Magnetic Flux Leakage (MFL) based Non Destructive Testing (NDT) technique is used to perform the defect detection process. The rectangular notch defects on the outer surface of steam generator tubes are modeled using COMSOL multiphysics 4.3a software. The obtained MFL images are de-noised to improve the integrity of flaw related information. Grey Level Co-occurrence Matrix (GLCM) features are extracted from MFL images and taken as input parameter to train the neural network. A comparative study on characterization have been carried out using feed-forward back propagation (FFBP) and cascade-forward back propagation (CFBP) algorithms. The results of both algorithms are evaluated with Mean Square Error (MSE) as a prediction performance measure. The average percentage error for length, depth and width are also computed. The result shows that the feed-forward back propagation network model performs better in characterizing the defects.

• 융합신호처리학회논문지
• /
• 제6권1호
• /
• pp.23-26
• /
• 2005

산업 시설 등에서 운전 중인 회전 기계의 동작, 감시, 진단은 설비의 효율적인 운용 및 사고 방지 등을 위해 매우 중요한 일이다. 이상 진단 기술은 기기에 설치된 센서로부터 취득된 데이터의 특징을 추출하는 것과 분류된 데이터를 이용해 정상 또는 이상으로 구분하거나 이상의 원인을 분석하는 두 가지 과정으로 진행할 수 있다. 기존의 기술들은 주파수 분석과 패턴 인식의 방법 등이 적용되어 왔다. 본 논문에서는 운전되고 있는 정상/비정상 상태를 분류하기 위하여 기기들의 사운드 정보를 획득하여 웨이블렛 변환을 거쳐 주파수 대역별 신호를 나누었다. 나누어진 대역별 신호의 RMS값으로 입력벡터를 구성하고 이 입력벡터에 K-means 방법을 적용하여 정상 및 비정상 상태의 모델을 결정한다. 결정된 정상 및 비정상 상태의 모델과 입력 벡터를 비교하여 입력 신호의 정상/비정상을 판단한다.

• 한국전기전자재료학회논문지
• /
• 제32권4호
• /
• pp.313-319
• /
• 2019

Induction motors connected with a three-phase AC system may malfunction due to reverse phase or open phase faults. Conventional overcurrent relays and overheating relays are used to prevent such accidents; however, their drawbacks include a low response speed and false operation. Therefore, in this study, a digital relay for the reverse-open phase was designed and fabricated. This relay can detect the reverse phase and open phase faults and send a trigger signal to the control circuit. The proposed relay was developed based on a microcontroller. The detection times of the reverse phase and open phase were verified as 320ms and 80ms, respectively. Compared with conventional relays that only protect the motor from one type of fault, the proposed relay can detect both, reverse phase and open phase faults. In addition, the fault detection, identification criterion, and trigger signal patterns can be modified by programming according to the requirements of users.

• 전기학회논문지
• /
• 제67권12호
• /
• pp.1619-1625
• /
• 2018

Portable electronic devices secondary batteries can cause fire and explosion due to micro-current change in addition to the situation of short-circuit inrush current, safety can not be secured with a general operation limited current fuse. Therefore, in secondary battery, it is necessary for the protector to satisfy both the limit current type operation in the open-short-circuit inrush current and the current detection operation characteristic in the micro current change situation and for this operation, a fuse for the current detection type secondary battery protection circuit can be applied. The purpose of this study is to design a protection device that operates stably in the hazardous situation of small capacity secondary battery for portable electronic devices through the design of low melting fuse elements alloy of sensing type fuse and secures stability in abnormal current state. As a result of the experiment, I-T and V-T operation characteristics are satisfied in a the design of the alloy of the current sensing type self-contained low melting point fuse and the resistance of the heating resistor. It is confirmed that it can prevent accidents of short circuit over-current and micro current change of secondary battery.